openPR Logo

Press Releases from Guyson International Ltd (23 total)

Guyson Blast Cabinet Etches Busbars

Guyson International, the UK’s foremost industrial finishing equipment manufacturer, has recently installed a specially configured Guyson Euroblast® 7PF (Pressure Fed) blast cabinet into one of the world’s leading designers and manufacturers of switchgear and instrumentation. The cabinet is to provide a blast etched surface, on their range of high voltage busbars, to improve adhesion of a special non-conductive coating. The company’s existing blast cabinet system had suffered from several operational

Guyson ‘Powder Flush’ For Cleaning Additive Manufactured Medical Implants

Industrial finishing equipment manufacturer Guyson International has focused its engineering expertise in solving a crucial problem during additive manufactured orthopaedic implant manufacture. The new Guyson ‘Powder Flush’ has been designed to specifically flush residual additive manufacturing (AM) powders from medical implant trabecular structures, which aid the interlocking human bone growth into the implant. Increasingly the world’s orthopaedic manufacturers are turning to additive manufacturing to

New Guyson ‘Automated Blast Products’ Brochure

For the Autumn season Guyson International, the UK’s foremost industrial finishing equipment manufacturer, have issued a brand new ‘Automated Blast Products’ brochure that showcases its comprehensive range of ‘automated’ blast systems. Through this twelve page brochure Guyson aims to show that, as manufacturing moves to greater levels of automation, control and integration, their range of automated blast systems are designed to fully integrate with customers’ production systems and provide the

Guyson Multiblast® RSB - New Universal Blast Automation

Renown finishing and shot peening equipment manufacturing experts Guyson International, have created a new universal automated blast system, based on its existing Multiblast® RSB, that now incorporates roof mounted servo drives to provide saturation coverage from the attached blast guns, across the entire rotating table; allowing full blast coverage to multiple components positioned on the table. This new universal automated blast system will prove ideal for subcontractors or manufacturers with a

Guyson Installs Multiple Blast Cabinets into Additive Manufacturer

Guyson International has recently installed four Guyson Euroblast 8, pressure feed, blast finishing systems complete with side loading turntables, into the brand new additive manufacturing (AM) factory of Materials Solutions (A Siemens Business) to remove semi-sintered particles from their components and provide an even cosmetic finish. These larger blast finishing systems augment an existing batch of smaller model 2 and model 4 Guyson Euroblast blast cabinets and continue the customer’s

New Guyson ‘Standard Blast Products’ Brochure

To kick off the New Year, Guyson International, the UK’s leading industrial finishing equipment manufacturer, has just issued a new ‘Standard Blast Products’ brochure that all in one place showcases its comprehensive range of ‘standard’ blast cabinets. This glossy twelve page brochure features their premium ATEX rated blast cabinets, its professional Euroblast® range, light industrial Formula cabinets and specialist alloy wheel refurbishment cabinets. Potential customers are invited to use the

Guyson Automated Blast System Removes Heat Treatment Salts From HSS End Mills

A leading overseas manufacturer of high quality tooling has recently installed an automated Guyson Multiblast® RXS400 blast system for the dual purposes of removing of oxidation and heat treatment salts from HSS Round End Mills and to provide an attractive cosmetic surface finish prior to applying anti-rusting oil. Along with the surface preparation of tooling, typically these highly compact automated blast systems are often specified, by customers, for grit blasting

Guyson to Launch New ATEX Blast Cabinet Systems at TCT

Industrial finishing equipment manufacturer Guyson International will be showcasing their new Euroblast® Ex range of blast systems at TCT 2018 – stand S44. Designed for use with potentially explosive powders and certified to the directive ATEX 2014/34/EU the systems are coded; ATEX II 2/3 D Ex h T135 °C Db/Dc. Particularly relevant in Additive Manufacturing (AM) applications where the use of fine powders of materials

Guyson International Awarded ISO 9001:2015

Leading industrial finishing equipment manufacturer Guyson International Ltd, based in Skipton, North Yorkshire is delighted to announce that it has achieved yet another milestone, in this its 80th year of business, by being awarded ISO 9001:2015 by the British Standards Institution (BSI). This replaces the previously held 9001:2008 version. Mark Viner, Guyson’s Blast & Wash Division’s Managing Director, stated “The award of this ISO 9001:2015 standard demanded a high degree of

Guyson’s Customers Benefit from Showroom Update

Leading industrial finishing equipment manufacturer Guyson International has recently updated the showroom facilities at its manufacturing site in Skipton, North Yorkshire to better reflect the extensive range of manual blast cabinets it sells and to now showcase its Additive Manufacturing component finishing expertise with the stand backdrop used at the last TCT show also on display. Customers visiting the company’s vast showroom can be walked through the range of standard Formula

Guyson SafeContractor Accredited

Leading industrial finishing equipment manufacturer Guyson International has received accreditation under the Alcumus SafeContractor scheme, which is accredited by UKAS, the UK’s national accreditation body for certification providers and they are also a member of SSIP (Safety Schemes in Procurement), ensuring that their accreditation services also follow best practice. The scheme recognises excellence in health and safety management and confirms that Guyson’s health and safety processes have been externally assessed to make

Guyson Supports the University of Bradford with Donated Blast Cabinet

Skipton based industrial finishing equipment manufacturer Guyson International, made initial contact with the University of Bradford during last year’s TCT + Personalize show, held at the NEC, which Guyson and University of Bradford regularly attends. Mr Mark Viner, Guyson’s Blast & Wash divisions Managing Director, visited the Universities show stand, and subsequent arrangements were made for further visits to the Polymer MNT laboratories at Bradford. During these visits common research

Guyson to Release Details of Powder Recovery System at TCT 2017

Leading surface finishing equipment manufacturer Guyson International will be releasing details of their latest powder recovery system, aimed at additive manufacturers with powder based systems, at the forthcoming TCT + Personalize show which is held at the NEC from the 26-28th September 2017. Alongside, Guyson will be showcasing its range of ‘surface finishing stations’. This exhibition covers all aspects of 3D printing, additive manufacturing (AM) and rapid prototyping and to

Guyson Sponsor Hepworth ‘Guyson Sandblaster Special’

A true ‘blast from the past’ turned up at Industrial finishing equipment manufacturer Guyson International’s Skipton headquarters last Thursday 15th June, when the Hepworth ‘Guyson Sandblaster Special’ made a special appearance in their showroom to show off its full restoration glory and say a massive “Thank you” to Guyson’s current owner James Thomson for sponsoring a set of custom made new tyres – as the car was previously shod in

Guyson's ‘New Look’ Reflects Long Motor Sports Heritage

Leading industrial finishing equipment manufacturer Guyson International has recently updated its blast cabinet decals and colour ways. Inspired by the modern industrial market places seeming preference for lighter coloured machine tools the new look incorporates visual symbolism reflecting the company’s long motor sports heritage by the adoption of sporting stripes on the machines. Guyson is currently visually rebranding all it blast cabinets, including the light industrial Formula range, the Euroblast® premier

Guyson Robot Blasting Prior To Thermal Spray Coating

Finishing equipment manufacturer Guyson International has designed, built and installed a twin pressure pot, Guyson RB10 PF robotically controlled blasting system into a world leading manufacturer of high-performance coatings, for the dual application of keying the surface of aerospace seal rings prior to plasma spraying and the surface preparation of turbine blade tips prior to thermal spray coating. The Guyson RB10 blast cabinet has internal dimensions: 1500 mm (w) x 1500

Guyson Appoint New Dutch Distributor

Leading industrial finishing equipment manufacturer Guyson International is pleased to announce the appointment of Blasteq, as Guyson’s new finishing equipment distributor for the Netherlands. Blasteq already have several years’ experience of selling soda blasting equipment and its blast media in and around the Netherlands from their base in Lisse, so they are well placed to represent Guyson’s range of manual bead blast cabinets and ultrasonic cleaning equipment to the Dutch industrial

Multistage Kerry Microclean - Degrease, Deflux and Phosphate

Industrial finishing equipment manufacturer Guyson International is now offering a multistage Kerry Microclean aqueous cleaner which is capable of degreasing, defluxing and phosphating a varied component mix. The Microclean machine can operate either as an integral part of a full production cell, being an inter-stage and final stage washer or work solely as a final stage washer. Typically this type of high volume multistage degreasing machine is used in manufacturing

Guyson Bead Blast Cabinets for Surface Finishing Additive Manufactured Parts

Industrial finishing equipment manufacturer Guyson International has recently installed two Euroblast® 4SF (suction fed) blast cabinets into the Department of Engineering at the University of Wolverhampton, for surface finishing Additive Manufactured parts and blast etching build plates. The initial enquiry came at last year’s TCT + Personalize show, held at the NEC, which Guyson regularly attends as the leading manufacturer of bead blasting equipment for surface finishing 3D Print and

New Guyson Blast Finishing Equipment to be Exhibited at TCT Show

Leading industrial finishing equipment manufacturer Guyson International will be exhibiting equipment from their blast finishing and ‘Kerry’ branded ultrasonic cleaning ranges at the forthcoming TCT + Personalize show to be held at the NEC, from the 28-29th September 2016. This exhibition covers all aspects of 3D printing, additive manufacturing (AM) and rapid prototyping and Guyson can be visited on Stand No. J26. Showing for the first time at ‘TCT + Personalize’

Alloy Wheel Refurbishment Success For The Guyson Wheelmaster

Leading industrial finishing equipment manufacturer Guyson International has seen numerous sales successes with its newly launched Guyson Wheelmaster, to both mobile van operators and static alloy wheel repair shops. This new blast system has been specifically designed for blast etching of alloy wheels and incorporates many application specific handling features that enable the operator to operate this wheel blasting system safely, without heavy lifting. Many encouraging words have been spoken

Guyson Mediblast Cabinet Targets Medical Industry

Leading specialist industrial finishing equipment manufacturer Guyson International has recently introduced the Guyson Mediblast stainless steel blast cabinet to its range of manual blast products. This particular blast cabinet has been especially engineered for medical product manufacturers and laboratories where the introduction of ferrous contamination would be detrimental to the production process. Based on the existing and proven Euroblast cabinet design, the Mediblast cabinet is now offered in 316 L

Kerry Ultrasonic Baths Provide Workshop And Lab Cleaning

Leading industrial finishing equipment manufacturer Guyson International now offers a broad range of high quality Kerry branded bench-top ultrasonic cleaning baths, all manufactured at its extensive 10,000 square metre facility in Skipton in the North of England. Typical usage for these ultrasonic baths include providing an affordable way to deliver precision cleaning in optical, electronics, jewellery, horological, medical and dental cleaning applications. The Pulsatron MKC baths can also thoroughly clean