openPR Logo
Press release

Distributed Data Acquisition And Control System with GW-7472

12-19-2016 07:06 PM CET | IT, New Media & Software

Press release from: ICP DAS USA

Distributed Data Acquisition And Control System with GW-7472

Distributed data acquisition and control system is widely used in all industrial fields. It is used for implement complex and costly applications. In a single control system, it involves many sub-systems, communication devices, data acquisition modules, and other I/O devices. They usually communicate over different protocols. Gateway or protocol converter would be the key “translate” element between two protocols. Compare to traditional centralized SCADA system, distributed data acquisition and control system is able to reduce the cost and time of troubleshooting or maintainence. Industries can also build their control system piece by piece into sub-systems and send all computed data to master system. In addition, both master system and sub-systems would be able to monitor and analyze the data or save for later.

GW-7472 is an Ethernet/IP to Modbus RTU/TCP gateway. It can scan or map the register data from Ethernet/IP device and exchange with Modbus register. One of the most common applications is the communication between Ethernet/IP PLC and Modbus data acquisition modules.

This application would only be one of the sub systems in a Distributed Data Acquisition And Control System. ICP DAS USA also offer gateways for different protocols, such as J1939, BACnet, Hart, Devicenet , Profinet, CANopen, Modbus, and other industrial protocols.
If you have other gateway requirements or have some questions, we can certainly help you to choose the best solution. Please call our technical support team at (310) 517-9888 X102

Established in 2001, ICP DAS USA is a manufacturer of cutting edge industrial automation and control hardware and software. It offers a broad range of flexible and cost-effective total solutions for various industries, including energy and power, factory and machine, agriculture, aerospace, oil and gas, etc. Its products range from M2M and “Internet of Things” (IoT) controllers and protocol converters to remote data acquisition I/O modules that support a variety of communication protocols including Modbus RTU, Modbus TCP, CAN bus, Profibus, Profinet, Ethernet/IP, HART, EtherCAT, DeviceNet, BACnet, and Wi-Fi.

ICP DAS USA, Inc.
24309 Narbonne Ave. Suite 200
Lomita, CA 90717
310-517-9888
www.icpdas-usa.com
mineladc@icpdas-usa.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Distributed Data Acquisition And Control System with GW-7472 here

News-ID: 398504 • Views: 494

More Releases from ICP DAS USA

New DL-100S Series Remote Temperature & Humidity Data Logger with LCD Screen & I …
LOMITA, CA— ICP DAS USA announces a new addition to their growing family of environmental sensors and data loggers, the DL-100S Series. DL-100S models come with a combination of temperature, humidity, and dew point sensors. The LCD screen gives an instantaneous reading at one glance and onboard storage keeps a record of up to 600,000 sensor readings with accompanying date and time stamps. An Ethernet connection offers the popular industrial protocol Modbus
PET-7H16M: High Speed Ethernet Data Acquisition
ICP DAS USA's new PET-7H16M is a high speed data acquisition module with a built-in Ethernet communication port for network data transfer. It includes 8 high speed analog input channels with a FIFO of 2048 samples and a maximum sampling rate of up to 200 kS/s, with 16-bit analog to digital (A/D) converters simultaneously sampling on each channel. In addition to the Analog input channels, each module provides 4 digital input
Vehicle and Engine Management System Monitoring with GW-7228
Engine management system is a build-in system to control and monitor the status of engine, such as engine speed, oil temperature, coolant temperature, oil pressure and other engine parameters. Engine manufacturers always integrate EMS system into engines for diagnostics purposes. EMS is communicated over CAN protocol with SAE J1939 bus. In order to read the engine parameters on computer, users must use protocol converter/ gateway to convert CAN bus to
Teletrac Navman Partners with ICP DAS USA
ICP DAS USA partners with Teletrac Navman to integrate ICP DAS data acquisition products in Teletrac Navman’s fleet management technologies. Teletrac Navman specializes in vehicle and equipment tracking using their proprietary software which collects data including GPS position and engine parameters communicated via J1939 protocol. Fleet managers are constantly finding new ways to build a stronger, more efficient fleet. By Teletrac Navman teaming with ICP DAS USA, they were able

All 5 Releases


More Releases for Modbus

New CAS Gateway Creates BACnet IP, Modbus TCP, Modbus RTU Points for Real-Time W …
Chipkin Automation Systems Inc. is proud to announce a much-anticipated product release. We have developed a custom driver for the CAS Gateway that allows users to access the Darksky weather API to create BACnet IP, Modbus TCP, Modbus RTU points for weather values. Vancouver, BC, Canada - June 3rd, 2019 - Chipkin has developed a custom driver for the CAS HTTP JSON Gateway (CAS 2700-79) which allows it to poll
Modbus-RTU Added to Integrated Motion Control
Terryville, CT – Advanced Micro Controls Inc. (AMCI), offers built-in Modbus-TCP (also called Modbus over Ethernet) communication in all of their integrated motion control products. Modbus-TCP is a popular Industrial Ethernet network designed to allow industrial equipment such as Programmable Logic Controllers, computers, operator panels, motors, sensors, and other types of physical input/output devices to communicate over an Ethernet network. AMCI Integrated Motion Control products with Modbus-TCP include: · 2-in-1 Drive/Controllers · 3-in-1
Novus FieldLogger for Modbus Applications
Flexible Data Logger Records Analog & Digital Signals With 8 universal channels for connection with different sensor types, the Novus FieldLogger is an ideal Modbus RTU input device, for example to transmit data as part of a SCADA system. Designed to handle any analog input, the FieldLogger can operate linked to a PC for online recording/supervision or as a stand-alone data logger with real-time and graph capabilities. 8-Channel Modbus RTU With the
Custom Modbus Systems Monitor Temperature and More
CAS DataLoggers Designs and Delivers Custom Systems If you need a data logging system that meets your I/O requirements, such as a distributed system to monitor multiple points spread across a factory floor or several buildings, call CAS DataLoggers! We can design and create a custom data logging system for your application by integrating Modbus-based devices from different manufacturers. Customize Our Systems to Your Needs The Modbus protocol allows communication
Modbus Networking in a Hospital
Monitoring Freezers for Temperature of Vaccines CHESTERLAND, OH—April 20, 2016 Recently a hospital required an automated temperature monitoring solution in order to measure and record the temperature of 50 freezers storing temperature-sensitive life science products. These freezers are located throughout the facility on 3 separate floors, but users need centralized access to all the temperature data. The hospital’s IT department also had a key requirement that they should be able to monitor
Modbus-TCP Stepper Indexer/Drivers Now Available
Terryville, CT – Advanced Micro Controls Inc. (AMCI) has enhanced its industrial Ethernet stepper indexer/drives to include Modbus TCP connectivity. This additional protocol greatly extends the potential of AMCI’s SD31045E & SD17060E in PLC-controlled applications. The powerful (4.5 & 6.0 Amp RMS) AC line powered stepper motor controller/drivers eliminate the need for a plug-in card, and are easily configured through the host PLC software. AMCI’s E-drives offer