Custom Modbus Systems Monitor Temperature and More
If you need a data logging system that meets your I/O requirements, such as a distributed system to monitor multiple points spread across a factory floor or several buildings, call CAS DataLoggers! We can design and create a custom data logging system for your application by integrating Modbus-based devices from different manufacturers.
Customize Our Systems to Your Needs
The Modbus protocol allows communication between devices using a number of different physical interconnections. This allows the data logger system to be distributed over longer distances.
Our custom Modbus systems consist of three parts:
• One or more loggers to manage the data collections, storage and alarming functions
• Analog and digital I/O modules to receive the sensor inputs and provide the necessary analog or digital outputs
• A communications bus to interconnect the loggers and I/O modules
• An Optional HMI to display data and control the system
Modbus provides a way to seamlessly tie all of these devices together as part of a system customized to fit your exact needs.
AirGate Modbus Gateway
The Novus AirGate-GPRS is a gateway designed for remote access to a Modbus network while sending alarm and status notifications via SMS messaging. The gateway is able to route Modbus packets from local and remote masters to local network segments. The Cloud Gateway also offers an intuitive web interface that allows users to view recent data, connection status, and more.
When configured with a data plan SIM card, access to the Novus Cloud Gateway server is available through the GSM/GPRS network. Additionally, it embeds two onboard analog or digital inputs for cost-effective telemetry applications. The two local RS 485 interfaces provide a connection to remote Modbus devices through the cloud gateway.
If you need to view live data, alarms and charts without a PC, we can provide an HMI with a touch screen and a custom page(s) to allow easy visualization of measurement values and to allow various control functions.
Recently one of our customers who owns a large manufacturing facility requested a multi-point oven and freezer monitoring system. After talking with the customer, our Inside Engineering department incorporated three different data logging products into custom systems.
Each of these devices utilizes a dataTaker Intelligent Data Logger as its ‘brain,’ while a Novus Airgate GPRS Modbus Gateway provides remote communications. To add additional inputs, we used Brainchild Distributed I/O Modules which are Modbus-based solutions for distributed I/O applications.
Each system features 2-8 Thermocouple inputs. Currently, four of these devices are installed, (providing 24 thermocouple inputs) more than enough for the customer’s requirements. In turn, each data logger system is located outside an oven or freezer, trailing a thermocouple probe located inside the oven’s interior. In this way, each of the customer’s ovens and freezers can be monitored ‘in clusters.’
For more information on our Custom Modbus Data Loggers, or to find the ideal solution for your application-specific needs, contact a CAS Data Logger Applications Specialist at (800) 956-4437 or visit our website at www.DataLoggerInc.com.
Computer Aided Solutions, LLC. dba CAS Data Loggers is a distributor of data loggers, paperless recorders and data acquisition equipment.
8437 Mayfield Rd
Chesterland OH 44026
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Custom Modbus Systems Monitor Temperature and More here
News-ID: 391902 • Views: 353
More Releases from CAS DataLoggers
New Wireless IoT ProfiSens Series from Infinite Informatics
New ProfiSens Wireless IoT Series from Infinite Informatics CAS DataLoggers is pleased to introduce the new AERINOS ProfiSens wireless IoT series from Infinite Informatics. The series includes a family of wireless sensor nodes and a cellular Data Gateway which forwards data and sends SMS alarm messages. Using ProfiSens, you can deploy anywhere using your own IoT network. The ProfiSens series includes the following components: ADU-700: Low power data concentrator with a cellular modem ADS-101:
New NXprog Programmable I/O Module from Novus
We are pleased to announce the new DigiRail NXprog from Novus Automation. The NXprog unites the best of both worlds: the reliability and robustness of an industrial device for automation applications with the ease of programming from the Arduino community. It provides a rich mix of integrated analog and digital I/O signals, allowing DigiRail NXprog to be used as an extension of standard data logging, data acquisition, and automation systems,
New Simple Logger Series of Data Loggers from AEMC
CAS Dataloggers is pleased to announce the new Simple Logger® series of data loggers from AEMC. The SL family includes ten different small, one channel recording devices powered by two AA alkaline batteries. Models are available for recording AC voltage, DC voltage, DC current, temperature, or digital pulses and events. The simple logger series are extremely easy to configure with just a few parameters to setup – scaling, measurement units,
New DT90 Series Data Loggers from dataTaker
CAS is pleased to announce the new dataTaker DT90 Series of compact, cost-effective, low power data loggers. The new DT90 Series is designed to provide an all-in-one data collection system with an integrated modem, specifically for remote applications. The rugged enclosure and wide operating temperature range provide reliable operation in virtually any environment. There are two models available – the DT90L and DT90N. The DT90N is perfect for
More Releases for Modbus
New CAS Gateway Creates BACnet IP, Modbus TCP, Modbus RTU Points for Real-Time W …
Chipkin Automation Systems Inc. is proud to announce a much-anticipated product release. We have developed a custom driver for the CAS Gateway that allows users to access the Darksky weather API to create BACnet IP, Modbus TCP, Modbus RTU points for weather values. Vancouver, BC, Canada - June 3rd, 2019 - Chipkin has developed a custom driver for the CAS HTTP JSON Gateway (CAS 2700-79) which allows it to poll
Modbus-RTU Added to Integrated Motion Control
Terryville, CT – Advanced Micro Controls Inc. (AMCI), offers built-in Modbus-TCP (also called Modbus over Ethernet) communication in all of their integrated motion control products. Modbus-TCP is a popular Industrial Ethernet network designed to allow industrial equipment such as Programmable Logic Controllers, computers, operator panels, motors, sensors, and other types of physical input/output devices to communicate over an Ethernet network. AMCI Integrated Motion Control products with Modbus-TCP include: · 2-in-1 Drive/Controllers · 3-in-1
Novus FieldLogger for Modbus Applications
Flexible Data Logger Records Analog & Digital Signals With 8 universal channels for connection with different sensor types, the Novus FieldLogger is an ideal Modbus RTU input device, for example to transmit data as part of a SCADA system. Designed to handle any analog input, the FieldLogger can operate linked to a PC for online recording/supervision or as a stand-alone data logger with real-time and graph capabilities. 8-Channel Modbus RTU With the
Modbus Networking in a Hospital
Monitoring Freezers for Temperature of Vaccines CHESTERLAND, OH—April 20, 2016 Recently a hospital required an automated temperature monitoring solution in order to measure and record the temperature of 50 freezers storing temperature-sensitive life science products. These freezers are located throughout the facility on 3 separate floors, but users need centralized access to all the temperature data. The hospital’s IT department also had a key requirement that they should be able to monitor
Modbus-TCP Stepper Indexer/Drivers Now Available
Terryville, CT – Advanced Micro Controls Inc. (AMCI) has enhanced its industrial Ethernet stepper indexer/drives to include Modbus TCP connectivity. This additional protocol greatly extends the potential of AMCI’s SD31045E & SD17060E in PLC-controlled applications. The powerful (4.5 & 6.0 Amp RMS) AC line powered stepper motor controller/drivers eliminate the need for a plug-in card, and are easily configured through the host PLC software. AMCI’s E-drives offer
Modbus TCP/IP Encoders Now Available
Terryville, CT – Advanced Micro Controls Inc. (AMCI), announces the newest EtherNet-based communications protocol supported by the company’s robust NR25 series encoders - Modbus TCP/IP. These heavy duty rotary sensors provide an overall measuring range of 16 bits (single-turn resolution) plus 14 bits (number of revolutions), or 30 bits total. With both single-turn and multi-turn versions available, AMCI’s Modbus TCP/IP encoders are ready for any application. AMCI