High-Speed Acquisition of Velocities
Pumps are required in diverse applications ranging from micro-dosage pumps in chemistry labs, standard pumps for gardens, all the way through to large-scale industrial or vacuum pumps. Each application has different test requirements, so users working in the pump sector greatly benefit from the flexibility and universal inputs of the Delphin Message and Expert Key devices.
Adjustable sampling rates of up to 100 kHz enable users to perform high-resolution inspections and testing. The hardware’s dependability and the continuous, long-term archiving of data via the ProfiSignal software makes Delphin ideal for service-life testing, environmental simulation and endurance testing. CAS DataLoggers is a leading North American distributor of Delphin—visit us today at www.dataloggerinc.com.
Delphin measurement features:
• Universal inputs suitable for any type of sensor (e.g. mA, mV, RTD, thermocouples)
• Rotation speed acquisition, vibration measurement, flows and pressures
• High speed acquisition of up to 100k Samples/s
• Control functions via analog, digital and PWM outputs
• Monitoring of limit values and alarms in the event of faults
A manufacturer of hydraulic pumps has designed three test stands for testing during the developmental phases of 30 kW, 90 kW and 250 kW classes. This requires high-speed measurement data acquisition and evaluation. Many of their parameters require measuring at sampling rates of up to 100 kHz.
Personnel selected Expert Key Model C devices for installation within their switch cabinets. Delphin ProfiSignal Klicks automation software allows users to create systems to meet their specific testing and evaluation requirements. Office compatibility has been given a special priority. Only a few mouse clicks are required to extract measurement data in ASCII/xls format or as vector-based graphics for insertion into a Word report.
Typical areas of application:
• Endurance trials
• Rotation speed monitoring via vibration measurement
• Determining characteristic curves
• Determining characteristic diagrams and pressure heads via volume flow rates
• No-load testing
• Heat testing
• Determining efficiency rates
• Expert Logger—Stand-alone data logger
• ProfiMessage—Modular Measurement Technology
• Expert Vibro—Vibration Measurement
Delphin has decades of experience in measurement technology, with many systems optimized for high-precision temperature measurement. Delphin data acquisition systems are ideal for M2M applications such as Machine Monitoring, Fault Diagnostics, Vibration Monitoring and more.
Analog inputs can be configured to any type of thermocouple or 4-wire RTD via Delphin’s galvanically-isolated 24-bit A/D converters and high-precision internal power sources for reference-current feeds. Users don’t need any additional converters.
Visualization Software Included:
Users can quickly and effectively operate the Expert Logger using the powerful ProfiSignal Go software that is included free in delivery. ProfiSignal is a flexible software platform supporting a wide variety of hardware and featuring powerful functionality for measurement, process automation, and communication capability. ProfiSignal also has drivers for many common software applications such as LabVIEW and DASYlab.
ProfiSignal Go can be used to portray measurement data in trends and to carry out detailed analyses. The software also enables fast ASCII exporting of measurement data for MS Excel™ or for conversion into TDM format.
The Data Logger Experts:
CAS Data Loggers is a distributor of data loggers and data acquisition equipment. We sell directly to end users and also work through a network of distributors and resellers. We have been in business for over 20 years, and actively involved in selling data loggers and real-time systems since 2001.
We want to help you select the most appropriate product for your application and we also provide technical support on all of our products. We also offer value-added services including on-site installation, wiring and packaging, engineering and design services, and turn-key systems.
For more information on Delphin Data Loggers, or to find the ideal solution for your application-specific needs, contact a CAS Data Logger Applications Specialist at (800) 956-4437 or visit our website at www.DataLoggerInc.com.
Computer Aided Solutions, LLC. dba CAS Data Loggers is a distributor of data loggers, paperless recorders and data acquisition equipment
CAS DataLoggers, Inc.
8437 Mayfield Rd.
Chesterland, Ohio 44026
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release High-Speed Acquisition of Velocities here
News-ID: 350695 • Views: 608
More Releases from CAS DataLoggers
New NXprog Programmable I/O Module from Novus
We are pleased to announce the new DigiRail NXprog from Novus Automation. The NXprog unites the best of both worlds: the reliability and robustness of an industrial device for automation applications with the ease of programming from the Arduino community. It provides a rich mix of integrated analog and digital I/O signals, allowing DigiRail NXprog to be used as an extension of standard data logging, data acquisition, and automation systems,
New Simple Logger Series of Data Loggers from AEMC
CAS Dataloggers is pleased to announce the new Simple Logger® series of data loggers from AEMC. The SL family includes ten different small, one channel recording devices powered by two AA alkaline batteries. Models are available for recording AC voltage, DC voltage, DC current, temperature, or digital pulses and events. The simple logger series are extremely easy to configure with just a few parameters to setup – scaling, measurement units,
New DT90 Series Data Loggers from dataTaker
CAS is pleased to announce the new dataTaker DT90 Series of compact, cost-effective, low power data loggers. The new DT90 Series is designed to provide an all-in-one data collection system with an integrated modem, specifically for remote applications. The rugged enclosure and wide operating temperature range provide reliable operation in virtually any environment. There are two models available – the DT90L and DT90N. The DT90N is perfect for
Introducing OdaLog Gas Data Loggers from ThermoFisher
CAS DataLoggers is introducing OdaLog Odor & Gas Data Loggers, a family of portable gas monitors from ThermoFisher Scientific. Effective immediately, CAS will be responsible for the sales and support of all OdaLog products within the United States. OdaLog, owned by ThermoFisher Scientific Australia Pty Ltd, are used extensively in the wastewater industry to record the level of Hydrogen Sulphide (H2S) and other gas emissions in pumping stations, manholes and sewer
More Releases for Delphin
Delphin Releases New ProfiSignal Web Software
Web-Based Software for Measurement & Testing CAS Dataloggers is pleased to announce the release on the new ProfiSignal Web Software package from Delphin Technology. ProfiSignal Web is state-of-the-art application for measurement and monitoring that allows decentralized data acquisition, centralized data storage and browser-based monitoring using a PC or mobile device. Accessing and analyzing measurement data from Industrial, Environmental or Life Science applications has become more flexible than ever before. Whether for
Process and Energy Data Acquisition Using Delphin
Record Data Anywhere, Independent of a PC The increasing focus on “Going Green” is permeating all areas of business. As part of the ongoing need to reduce energy costs, optimizing energy use has become a priority not just for high-consumption industries but for businesses of all sizes. To accomplish this, it’s often necessary to simultaneously acquire process and energy data and to identify the correlations between them. Delphin Expert Loggers are
Delphin Offers Extensive Driver Development
Let Delphin Develop Your Application! For flexible use in many different measurement applications, communication between Delphin data loggers and third-party ICA technology is possible using standard protocols. The communication interfaces in Delphin ProfiSignal software and hardware provide a multitude of options for exchanging data. CAS DataLoggers distributes Delphin dataloggers in the US--just contact us at 1-800-956-4437 if you have questions about connecting an ICA system to Delphin hardware or software.
Delphin Upgrades ProfiSignal Measurement Software
Version 4.2.10 Available for Download at CAS DataLoggers CAS DataLoggers and Delphin Technology are proud to announce the release of an improved version of Delphin’s popular ProfiSignal data acquisition software. Version 4.2.10 adds new bug fixes as suggested by users around the world. You can download the new version from our Delphin Downloads page at http://www.dataloggerinc.com/downloads/delphin.php. Whether you work in test, process control or another application, at CAS DataLoggers we can
Precision Electrical Measurement Using Delphin
Fully-Automated Engine Test Stands Motor Test stands are required during the automotive R&D phase for serial testing and also for endurance trials. Measurements taken during the developmental phase such as Temperature and Voltage are fully-automated whenever possible. Sensors check the electrical and mechanical properties of the test sample as well as temperature patterns and overload operation. Testing conditions can vary widely--from the tiniest of motors to large drives in the megawatt
Delphin Systems Provide SDI-12 Sensor Integration
Versatile Data Logger Connects to Enviro Smart Sensors The SDI-12 interface (Serial Data Interface at 1200 Baud) enables, via a digital signal, the establishment of a connection with multiple "low-power" sensors and a data logger. Sensors can be operated on the bus with asynchronous, serial communication protocols. Such sensors (e.g. for soil moisture, soil temperature, air humidity, water potential, electrical conductivity, etc.) are primarily used in environmental engineering. Now users can