openPR Logo
Press release

Delphin Offers Extensive Driver Development

08-31-2016 12:31 PM CET | Industry, Real Estate & Construction

Press release from: CAS DataLoggers

Delphin Technology Data Acquisition Systems

Delphin Technology Data Acquisition Systems

Let Delphin Develop Your Application!

For flexible use in many different measurement applications, communication between Delphin data loggers and third-party ICA technology is possible using standard protocols. The communication interfaces in Delphin ProfiSignal software and hardware provide a multitude of options for exchanging data. CAS DataLoggers distributes Delphin dataloggers in the US--just contact us at 1-800-956-4437 if you have questions about connecting an ICA system to Delphin hardware or software.

Driver Development:

The following standard protocols are already included within Delphin devices:
• PROFIBUS DP slave (also redundant)
• Modbus TCP client/server
• Modbus RTU master/slave
• CAN-RAW
It’s easy for users to set these standard interfaces and to work with the ProfiSignal software.

Many system integrators offer equipment with interfaces which use special protocols for exchanging data. However, Delphin also offers to develop special drivers for your device. These special drivers can be installed via the hardware’s serial interfaces and also with via PC interfaces. They are then integrated into the DataService as DLL files and can send/receive your data via the individual channels. You can use the drivers in ProfiSignal in the same way as channels from Delphin devices.

Data Logger / Data Acquisition Systems
Delphin data loggers/data acquisition systems solve a variety of measurement and control problems in industrial and laboratory applications. They feature different analog and digital I/O modules that can be used with a wide range of signal types including: Voltage; 4-20 mA current; Thermocouple; RTD; and Resistance. These professional measurement systems also offer powerful alarm and programming capabilities to allow the instruments to process measurements and initiate actions on their own.

Delphin systems can be used for local data acquisition and logging when connected to a PC; for remote unattended data collection connected the internet; or as stand-alone devices. Delphin products are typically used in the following ways:

• Message devices for industrial measurement data acquisition
• ProfiSignal for test bench automation
• The AMDT - module for vibration monitoring and vibration analysis
• Remote monitoring of plant and machinery using ProfiSignal Go software
• Operating DAQ and intelligent processing within Message devices
• Supplying individual solutions (mobile, control cabinets, 19-inch .....)
• Developmental services (processing, user interfaces, databases)
• Start-ups and training

The Data Logger Experts:
CAS Dataloggers is an experienced Delphin distributor in North America. We offer Delphin dataloggers and data acquisition and control systems capable of even microsecond precision. We also provide configuration assistance, custom programming, custom system design and assembly, post-sales technical support, and repair and calibration services.
Call us at 800-956-4437 to speak with one of our knowledgeable Application Engineers and we'll help you select the best data logger for your application.

Computer Aided Solutions, LLC. dba CAS Data Loggers is a distributor of data loggers, paperless recorders and data acquisition equipment.

CAS DataLoggers, Inc.
8437 Mayfield Rd.
Chesterland, Ohio 44026
(440) 729-2570
(800) 956-4437
sales@dataloggerinc.com
www.dataloggerinc.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Delphin Offers Extensive Driver Development here

News-ID: 359550 • Views: 480

More Releases from CAS DataLoggers

CAS Reaches Over 600 COVID-19 Vaccine Monitoring Kits Shipped!
Since the rollout of COVID-19 Pfizer and Moderna vaccines at the end of December 2020, CAS has been hard at work meeting the demand for vaccine temperature monitoring kits. This demand has only increased with the addition of the Janssen/Johnson & Johnson vaccine and the expansion of vaccines available to the general public in the United States. As of Monday, March 15th, 2021, CAS has now shipped over 600 COVID-19
New Wireless IoT ProfiSens Series from Infinite Informatics
New ProfiSens Wireless IoT Series from Infinite Informatics CAS DataLoggers is pleased to introduce the new AERINOS ProfiSens wireless IoT series from Infinite Informatics. The series includes a family of wireless sensor nodes and a cellular Data Gateway which forwards data and sends SMS alarm messages. Using ProfiSens, you can deploy anywhere using your own IoT network. The ProfiSens series includes the following components: ADU-700: Low power data concentrator with a cellular modem ADS-101:
New NXprog Programmable I/O Module from Novus
We are pleased to announce the new DigiRail NXprog from Novus Automation. The NXprog unites the best of both worlds: the reliability and robustness of an industrial device for automation applications with the ease of programming from the Arduino community. It provides a rich mix of integrated analog and digital I/O signals, allowing DigiRail NXprog to be used as an extension of standard data logging, data acquisition, and automation systems,
New Simple Logger Series of Data Loggers from AEMC
CAS Dataloggers is pleased to announce the new Simple Logger® series of data loggers from AEMC. The SL family includes ten different small, one channel recording devices powered by two AA alkaline batteries. Models are available for recording AC voltage, DC voltage, DC current, temperature, or digital pulses and events. The simple logger series are extremely easy to configure with just a few parameters to setup – scaling, measurement units,

All 5 Releases


More Releases for Delphin

Delphin Releases New ProfiSignal Web Software
Web-Based Software for Measurement & Testing CAS Dataloggers is pleased to announce the release on the new ProfiSignal Web Software package from Delphin Technology. ProfiSignal Web is state-of-the-art application for measurement and monitoring that allows decentralized data acquisition, centralized data storage and browser-based monitoring using a PC or mobile device. Accessing and analyzing measurement data from Industrial, Environmental or Life Science applications has become more flexible than ever before. Whether for
Process and Energy Data Acquisition Using Delphin
Record Data Anywhere, Independent of a PC The increasing focus on “Going Green” is permeating all areas of business. As part of the ongoing need to reduce energy costs, optimizing energy use has become a priority not just for high-consumption industries but for businesses of all sizes. To accomplish this, it’s often necessary to simultaneously acquire process and energy data and to identify the correlations between them. Delphin Expert Loggers are
Delphin Upgrades ProfiSignal Measurement Software
Version 4.2.10 Available for Download at CAS DataLoggers CAS DataLoggers and Delphin Technology are proud to announce the release of an improved version of Delphin’s popular ProfiSignal data acquisition software. Version 4.2.10 adds new bug fixes as suggested by users around the world. You can download the new version from our Delphin Downloads page at http://www.dataloggerinc.com/downloads/delphin.php. Whether you work in test, process control or another application, at CAS DataLoggers we can
Precision Electrical Measurement Using Delphin
Fully-Automated Engine Test Stands Motor Test stands are required during the automotive R&D phase for serial testing and also for endurance trials. Measurements taken during the developmental phase such as Temperature and Voltage are fully-automated whenever possible. Sensors check the electrical and mechanical properties of the test sample as well as temperature patterns and overload operation. Testing conditions can vary widely--from the tiniest of motors to large drives in the megawatt
Delphin Systems Provide SDI-12 Sensor Integration
Versatile Data Logger Connects to Enviro Smart Sensors The SDI-12 interface (Serial Data Interface at 1200 Baud) enables, via a digital signal, the establishment of a connection with multiple "low-power" sensors and a data logger. Sensors can be operated on the bus with asynchronous, serial communication protocols. Such sensors (e.g. for soil moisture, soil temperature, air humidity, water potential, electrical conductivity, etc.) are primarily used in environmental engineering. Now users can
Delphin Technology Exhibiting at Hannover Messe 2016!
The World’s Leading Trade Fair for Industrial Technology on April 25-29 CHESTERLAND, OH—March 29, 2016 It’s almost April and one of the biggest industrial tradeshows in the world is about to get underway! If you happen to be in Germany this April, come visit Delphin Technology 25-29 April at Hannover Messe at Stand B51 in Hall 11. Delphin’s Frank Ringsdorf will be in attendance all week, showing visitors how Delphin data loggers