Delphin Systems Provide SDI-12 Sensor Integration
The SDI-12 interface (Serial Data Interface at 1200 Baud) enables, via a digital signal, the establishment of a connection with multiple "low-power" sensors and a data logger. Sensors can be operated on the bus with asynchronous, serial communication protocols. Such sensors (e.g. for soil moisture, soil temperature, air humidity, water potential, electrical conductivity, etc.) are primarily used in environmental engineering.
Now users can record environmental data using Delphin’s new Expert Logger device to connect to SDI-12 sensors. CAS DataLoggers offers these products at www.dataloggerinc.com for a wide range of applications.
SDI-12: The Smart Sensor Technology
SDI-12 has become the environmental standard of choice for environmental monitoring applications. SDI-12 is a serial-digital interface standard for microprocessor-based sensors and supports many intelligent capabilities such as automated data transfer. SDI-12 also enables automated alarms and time-saving control tasks such as activating a relay.
• Compact design and easy installation lowers time and cost of deployment;
• SDI-12 dataloggers can operate unattended on battery power for extended periods;
• SDI-12 sensors can apply complex calibration algorithms or internal computations;
• Data loggers can interface with many different sensor types;
• Smart sensors can be used as RTUs to automatically send data to a desktop PC.
Delphin Expert Logger:
If you need to collect and record data from devices with an SDI-12 interface, CAS DataLoggers has several data logging solutions to meet your needs. The new Delphin Expert Logger is Delphin‘s new generation of data loggers. Based on FPGA technology, it combines the latest communication technology with advanced measurement technology.
Delphin’s SDI-12 interface allows new options for applications especially in the field of environmental engineering. An SDI-12 interface is standard in Model 100 and 200 Expert Logger devices; to use the interface, users require a software update including firmware.
Connection to Expert devices takes place via a digital input. The Expert Logger device functions as a master and the sensors as slave devices. Measurement data is processed like internal channels and can be further processed, saved, portrayed and evaluated using software channels.
The Expert Logger can process up to 46 analog input channels at both low and high rates of sampling. Measurement data can be accurately acquired, independently stored and transmitted to the internet or a PC for evaluation via USB, LAN, WLAN or LTE.
Operation made simple:
With the Expert Logger, sensors are connected via plug-in screw terminals and users always have a good overview of the channels despite their high density. Each set of four terminals can be configured as two differential inputs to measure voltage, currents, thermocouples, or to take measurements from a 4-wire RTD.
The Expert Logger is easy to configure from a PC. The device settings are stored internally and can also be read out and stored on a PC and analyzed offline without the need for a connected Expert Logger. Meanwhile the Expert Logger‘s software channels clearly set it apart from other loggers and make it very popular among users.
To learn more about the Delphin Expert Logger, or to find the ideal solution for your application-specific needs, contact a CAS Data Logger Applications Specialist at (800) 956-4437 or visit our website at www.DataLoggerInc.com.
Computer Aided Solutions, LLC. dba CAS Data Loggers is a distributor of data loggers, paperless recorders and data acquisition equipment.
CAS DataLoggers, Inc.
8437 Mayfield Rd.
Chesterland, Ohio 44026
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Delphin Systems Provide SDI-12 Sensor Integration here
News-ID: 350362 • Views: 632
More Releases from CAS DataLoggers
CAS Reaches Over 600 COVID-19 Vaccine Monitoring Kits Shipped!
Since the rollout of COVID-19 Pfizer and Moderna vaccines at the end of December 2020, CAS has been hard at work meeting the demand for vaccine temperature monitoring kits. This demand has only increased with the addition of the Janssen/Johnson & Johnson vaccine and the expansion of vaccines available to the general public in the United States. As of Monday, March 15th, 2021, CAS has now shipped over 600 COVID-19
New Wireless IoT ProfiSens Series from Infinite Informatics
New ProfiSens Wireless IoT Series from Infinite Informatics CAS DataLoggers is pleased to introduce the new AERINOS ProfiSens wireless IoT series from Infinite Informatics. The series includes a family of wireless sensor nodes and a cellular Data Gateway which forwards data and sends SMS alarm messages. Using ProfiSens, you can deploy anywhere using your own IoT network. The ProfiSens series includes the following components: ADU-700: Low power data concentrator with a cellular modem ADS-101:
New NXprog Programmable I/O Module from Novus
We are pleased to announce the new DigiRail NXprog from Novus Automation. The NXprog unites the best of both worlds: the reliability and robustness of an industrial device for automation applications with the ease of programming from the Arduino community. It provides a rich mix of integrated analog and digital I/O signals, allowing DigiRail NXprog to be used as an extension of standard data logging, data acquisition, and automation systems,
New Simple Logger Series of Data Loggers from AEMC
CAS Dataloggers is pleased to announce the new Simple Logger® series of data loggers from AEMC. The SL family includes ten different small, one channel recording devices powered by two AA alkaline batteries. Models are available for recording AC voltage, DC voltage, DC current, temperature, or digital pulses and events. The simple logger series are extremely easy to configure with just a few parameters to setup – scaling, measurement units,
More Releases for Logger
WHAT IS A DATA LOGGER?
Understanding Data Loggers What is a data logger? The generally accepted answer is that a datalogger is an electronic device that autonomously records data from some type of sensor and stores it in local memory with a time and date stamp. Data Loggers are widely used in virtually every industry for a variety of applications. Temperature is the most commonly measured parameter and is also the most commonly recorded parameter. There
Data Logger vs DAQ
Key Differences Between Data Logging and Data Acquisition What is the difference between a Data Logger and a Data Acquisition System (DAQ)? A data logger is a type of data acquisition system, but a data acquisition system is not necessarily a datalogger. There are several key functional differences in how the market understands these two classes of instruments. While the differences between these two types of instruments have been reduced
Transformer monitor and logger
Transformer monitoring made easy!!!! Miro-F Transformer monitor and logger is a precision power quality instrument, intended for permanent installation and specifically designed for comprehensive and reliable LV side transformer monitoring. • Measure three phase voltages, four currents and two temperatures (ambient and surface).' • Information includes V, I, P.F, THD, Sags,Swells, Interruptions and other power quality measurements. • Integrated WiFi and Cellular (3G/4G), provides platforms for TCP/IP, FTP, CiDR and DNP3 (SCADA). • Suited for
Expert Logger Devices Simplify Vehicle Test Applications
Delphin Adds CANbus Interfaces and J1939 Protocol as Standard To ensure effective automotive testing, vehicle component connectivity needs to include CAN bus systems. Whether working on mobile measurement tasks or in stationary testing at stands, users require data not only from standard sensors placed on the test samples, but also data being processed in controller units in the samples themselves. Therefore, synchronized acquisition of measurement and controller data is necessary to
CANbus Data Logger for Diesel Engine Monitoring
Universal Data Logger Monitors Several Engine Parameters Simultaneously EPA emissions regulations mandate that automotive manufacturers and designers reduce pollutants from their diesel engines. All applicable engines need verification that their emission controls are effective and up-to-date regarding air toxics, etc. As enforcement has increased, QA and documentation are paramount. To collect the necessary data, the industry has to monitor diesel engines over the CAN network for Temperature, Pressure, RPM and more.
Keystroke logger has been used for many years as spy software in computer systems. Millions of people worldwide use the keystroke logger to track people’s activities. Keystroke logger is useful in office environment. In the office, there are employees who don’t pay attention at work. They don’t like to work. They surf the internet for their own purposes. It is not good to let employees slack as they are wasting