Cleanroom Monitoring Systems Keep Pharma Data Secure
Continuous and secure data acquisition and documentation is especially important in the pharmaceutical industry with its unique production and storage requirements, as well as for proprietary research and development. According to FDA CFR21 Part 11, data acquisition and cleanroom monitoring systems must operate in compliance with GAMP/GMP guidelines.
For effective monitoring, measurement data and limit values for parameters such as Temperature, Humidity, Particle count and Pressure all need to be logged and archived in a format safe from manipulation. Additionally, any user intervention relevant to the processes in question must also be recorded to an audit trail. Delphin Technology’s Expert and Message series data loggers, combined with ProfiSignal analysis software, offers pharma companies a complete system performing all facets of cleanroom monitoring systems including data acquisition, monitoring, reporting and user management.
• Secure acquisition of all measurement data acquired from cleanrooms and pharmaceutical production and storage environments
• Independent data storage within the Delphin device parallel to PC and network storage
• Flexible setup of monitoring functions using email, FTP, text messaging or digital outputs
• Adaptable process visualization and reporting using ProfiSignal
• Scalable systems for large and small designs
Automated Measurement and Alarms:
Testing the long-term stability of pharmaceutical substances is a particular challenge for pharma process and stability engineers. To this end, many pharmaceutical facilities are equipped with Delphin cleanroom monitoring systems. Here, substances are stored in climate chambers and deep freezers where environmental conditions need to be recorded, archived and tracked. Any changes in operational parameters--such as preset temperatures and threshold values--also need to be recorded in a way that is both reliable and secure.
Increasingly, users are turning to integrated systems supporting alarm management. Systems need to handle alarm acknowledgement and disposition while recording the users’ actions to satisfy audit trail requirements. All digital documents and annotations are recorded in secure, uneditable formats.
Typical Areas of Application:
• Environmental monitoring in Clean Rooms
• CFR21 Part 11-compliant monitoring for pharmacists
• Continual monitoring of production facilities in accordance with the FDA
• Fully-integrated monitoring solutions for pharmaceutical production
• Automated alarm systems
Professional Measurement Devices:
Delphin Technologies data loggers and data acquisition systems solve a variety of measurement and control problems in environmental applications in labs and industrial settings. Delphin systems feature a variety of analog and digital I/O modules that can accept a wide range of signal types including: Voltage; 4-20 mA Current; Thermocouple; RTD; and Resistance. They also offer powerful computation and alarming capabilities enabling them to process measurements and initiate actions on their own. Delphin systems can be used for local data acquisition and logging when connected to a PC; for remote unattended data collection connected the internet; or as stand-alone devices.
For more information on cleanroom monitoring systems, or to find the ideal solution for your application-specific needs, contact a CAS Data Logger Applications Specialist at (800) 956-4437 or visit our website at www.DataLoggerInc.com.
Computer Aided Solutions, LLC. dba CAS DataLoggers is a distributor of data loggers, paperless recorders and data acquisition equipment.
We have the industry’s most complete selection of data logging equipment, with hundreds of different models from more than 18 manufacturers. With data loggers from 1 to 300 channels we can record temperature, humidity, force/strain, pressure, flow, voltage, current, resistance, vibration and other digital signals, in connection with serial (RS-232/RS-485), CAN/OBD or SDI-12 devices. We sell directly to end users and also work through a network of distributors and resellers throughout the United States, Canada, Central and South America.
8437 Mayfield Rd Unit 104
Chesterland, OH 44026
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Cleanroom Monitoring Systems Keep Pharma Data Secure here
News-ID: 1183883 • Views: 210
More Releases from CAS DataLoggers
New Wireless IoT ProfiSens Series from Infinite Informatics
New ProfiSens Wireless IoT Series from Infinite Informatics CAS DataLoggers is pleased to introduce the new AERINOS ProfiSens wireless IoT series from Infinite Informatics. The series includes a family of wireless sensor nodes and a cellular Data Gateway which forwards data and sends SMS alarm messages. Using ProfiSens, you can deploy anywhere using your own IoT network. The ProfiSens series includes the following components: ADU-700: Low power data concentrator with a cellular modem ADS-101:
New NXprog Programmable I/O Module from Novus
We are pleased to announce the new DigiRail NXprog from Novus Automation. The NXprog unites the best of both worlds: the reliability and robustness of an industrial device for automation applications with the ease of programming from the Arduino community. It provides a rich mix of integrated analog and digital I/O signals, allowing DigiRail NXprog to be used as an extension of standard data logging, data acquisition, and automation systems,
New Simple Logger Series of Data Loggers from AEMC
CAS Dataloggers is pleased to announce the new Simple Logger® series of data loggers from AEMC. The SL family includes ten different small, one channel recording devices powered by two AA alkaline batteries. Models are available for recording AC voltage, DC voltage, DC current, temperature, or digital pulses and events. The simple logger series are extremely easy to configure with just a few parameters to setup – scaling, measurement units,
New DT90 Series Data Loggers from dataTaker
CAS is pleased to announce the new dataTaker DT90 Series of compact, cost-effective, low power data loggers. The new DT90 Series is designed to provide an all-in-one data collection system with an integrated modem, specifically for remote applications. The rugged enclosure and wide operating temperature range provide reliable operation in virtually any environment. There are two models available – the DT90L and DT90N. The DT90N is perfect for
More Releases for Delphin
Delphin Releases New ProfiSignal Web Software
Web-Based Software for Measurement & Testing CAS Dataloggers is pleased to announce the release on the new ProfiSignal Web Software package from Delphin Technology. ProfiSignal Web is state-of-the-art application for measurement and monitoring that allows decentralized data acquisition, centralized data storage and browser-based monitoring using a PC or mobile device. Accessing and analyzing measurement data from Industrial, Environmental or Life Science applications has become more flexible than ever before. Whether for
Process and Energy Data Acquisition Using Delphin
Record Data Anywhere, Independent of a PC The increasing focus on “Going Green” is permeating all areas of business. As part of the ongoing need to reduce energy costs, optimizing energy use has become a priority not just for high-consumption industries but for businesses of all sizes. To accomplish this, it’s often necessary to simultaneously acquire process and energy data and to identify the correlations between them. Delphin Expert Loggers are
Delphin Offers Extensive Driver Development
Let Delphin Develop Your Application! For flexible use in many different measurement applications, communication between Delphin data loggers and third-party ICA technology is possible using standard protocols. The communication interfaces in Delphin ProfiSignal software and hardware provide a multitude of options for exchanging data. CAS DataLoggers distributes Delphin dataloggers in the US--just contact us at 1-800-956-4437 if you have questions about connecting an ICA system to Delphin hardware or software.
Delphin Upgrades ProfiSignal Measurement Software
Version 4.2.10 Available for Download at CAS DataLoggers CAS DataLoggers and Delphin Technology are proud to announce the release of an improved version of Delphin’s popular ProfiSignal data acquisition software. Version 4.2.10 adds new bug fixes as suggested by users around the world. You can download the new version from our Delphin Downloads page at http://www.dataloggerinc.com/downloads/delphin.php. Whether you work in test, process control or another application, at CAS DataLoggers we can
Precision Electrical Measurement Using Delphin
Fully-Automated Engine Test Stands Motor Test stands are required during the automotive R&D phase for serial testing and also for endurance trials. Measurements taken during the developmental phase such as Temperature and Voltage are fully-automated whenever possible. Sensors check the electrical and mechanical properties of the test sample as well as temperature patterns and overload operation. Testing conditions can vary widely--from the tiniest of motors to large drives in the megawatt
Delphin Systems Provide SDI-12 Sensor Integration
Versatile Data Logger Connects to Enviro Smart Sensors The SDI-12 interface (Serial Data Interface at 1200 Baud) enables, via a digital signal, the establishment of a connection with multiple "low-power" sensors and a data logger. Sensors can be operated on the bus with asynchronous, serial communication protocols. Such sensors (e.g. for soil moisture, soil temperature, air humidity, water potential, electrical conductivity, etc.) are primarily used in environmental engineering. Now users can