openPR Logo
Press release

Process and Energy Data Acquisition Using Delphin

05-11-2018 10:37 AM CET | Industry, Real Estate & Construction

Press release from: CAS DataLoggers

Record Data Anywhere, Independent of a PC

The increasing focus on “Going Green” is permeating all areas of business. As part of the ongoing need to reduce energy costs, optimizing energy use has become a priority not just for high-consumption industries but for businesses of all sizes. To accomplish this, it’s often necessary to simultaneously acquire process and energy data and to identify the correlations between them.

Delphin Expert Loggers are ideal for such measurement and analysis tasks. Delphin’s scalable devices can be installed at the process site and then used for process control as well as for acquiring analog data via direct sensor or 4-20 mA transmitters.

A field bus connection to other devices is also possible. Power or energy data acquisition can be accomplished via digital inputs. Pulses from the meters are counted by the Expert Loggers and converted into power and usage data. This data, along with process data, can then be evaluated and output in reports using Delphin’s intuitive ProfiSignal software.

Application Features:
• Establishes a combined network of energy and process measurement
• Stationary energy data acquisition
• Independent and secure energy data acquisition without the need for PC support
• Easy to analyze correlations between processes control systems and energy consumption
• Monitoring of consumption and output

Delphin Models:

Delphin systems are successfully used in the fields of process measurement, test engineering, and research and development. Delphin’s range includes:
ProfiMessage systems are designed for use as modular measurement, control and monitoring units. ProfiMessage devices process any signal quickly and reliably from just a few thermocouples right up to thousands of measurement points spread over several plant areas.

Expert Vibro and Transient devices are being used around the world for condition monitoring of rotating machinery or to capture high speed transient signals from sensors or machines. Expert Vibro/Transient devices have simultaneous analog input sampling as fast as 50 kHz per channel.

Expert Logger Data Loggers are advanced high-speed data loggers for demanding applications. They are suitable for stand-alone data logging, product testing, quality and reliability testing, process monitoring, research and development, and fault analysis. Virtual internal channels allow calculations, statistics, and various other functions.

Delphin Technology:

Delphin Technologies data loggers/data acquisition systems solve a variety of measurement and control problems in industrial applications. They feature a variety of analog and digital input and output modules that can be used with a wide range of signal types including: voltage; 4-20 mA current; thermocouple; RTD; and resistance. These units also offer powerful alarm and programming capabilities allowing instruments to process measurements and initiate actions on their own.

Delphin systems can be used for local data acquisition and logging when connected to a PC; for remote unattended data collection connected to the internet; or as a stand-alone device. Delphin products offer:
• ProfiSignal Klicks software for the automation of testing benches
• The Expert Vibro for vibration monitoring and analysis of rotating machinery
• Remote monitoring of plant and machinery using ProfiSignal Go software
• High speed, synchronous sampling up to 50 kHz per channel
• Galvonic isolation for high noise immunity and channel to channel isolation

For further information on Delphin data loggers, additional Delphin DAQ and control systems, or to find the ideal solution for your application-specific needs, contact a CAS Data Logger Applications Specialist at (800) 956-4437 or visit our website at www.DataLoggerInc.com.

Computer Aided Solutions, LLC. dba CAS DataLoggers is a distributor of data loggers, paperless recorders and data acquisition equipment.

We have the industry’s most complete selection of data logging equipment, with hundreds of different models from more than 18 manufacturers. With data loggers from 1 to 300 channels we can record temperature, humidity, force/strain, pressure, flow, voltage, current, resistance, vibration and other digital signals, in connection with serial (RS-232/RS-485), CAN/OBD or SDI-12 devices. We sell directly to end users and also work through a network of distributors and resellers throughout the United States, Canada, Central and South America.

CAS DataLoggers
8437 Mayfield Rd Unit 104
Chesterland, OH 44026

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Process and Energy Data Acquisition Using Delphin here

News-ID: 1046505 • Views: 367

More Releases from CAS DataLoggers

New Wireless IoT ProfiSens Series from Infinite Informatics
New ProfiSens Wireless IoT Series from Infinite Informatics CAS DataLoggers is pleased to introduce the new AERINOS ProfiSens wireless IoT series from Infinite Informatics. The series includes a family of wireless sensor nodes and a cellular Data Gateway which forwards data and sends SMS alarm messages. Using ProfiSens, you can deploy anywhere using your own IoT network. The ProfiSens series includes the following components: ADU-700: Low power data concentrator with a cellular modem ADS-101:
New NXprog Programmable I/O Module from Novus
We are pleased to announce the new DigiRail NXprog from Novus Automation. The NXprog unites the best of both worlds: the reliability and robustness of an industrial device for automation applications with the ease of programming from the Arduino community. It provides a rich mix of integrated analog and digital I/O signals, allowing DigiRail NXprog to be used as an extension of standard data logging, data acquisition, and automation systems,
New Simple Logger Series of Data Loggers from AEMC
CAS Dataloggers is pleased to announce the new Simple Logger® series of data loggers from AEMC. The SL family includes ten different small, one channel recording devices powered by two AA alkaline batteries. Models are available for recording AC voltage, DC voltage, DC current, temperature, or digital pulses and events. The simple logger series are extremely easy to configure with just a few parameters to setup – scaling, measurement units,
New DT90 Series Data Loggers from dataTaker
CAS is pleased to announce the new dataTaker DT90 Series of compact, cost-effective, low power data loggers. The new DT90 Series is designed to provide an all-in-one data collection system with an integrated modem, specifically for remote applications. The rugged enclosure and wide operating temperature range provide reliable operation in virtually any environment. There are two models available – the DT90L and DT90N. The DT90N is perfect for

All 5 Releases


More Releases for Delphin

Delphin Releases New ProfiSignal Web Software
Web-Based Software for Measurement & Testing CAS Dataloggers is pleased to announce the release on the new ProfiSignal Web Software package from Delphin Technology. ProfiSignal Web is state-of-the-art application for measurement and monitoring that allows decentralized data acquisition, centralized data storage and browser-based monitoring using a PC or mobile device. Accessing and analyzing measurement data from Industrial, Environmental or Life Science applications has become more flexible than ever before. Whether for
Delphin Offers Extensive Driver Development
Let Delphin Develop Your Application! For flexible use in many different measurement applications, communication between Delphin data loggers and third-party ICA technology is possible using standard protocols. The communication interfaces in Delphin ProfiSignal software and hardware provide a multitude of options for exchanging data. CAS DataLoggers distributes Delphin dataloggers in the US--just contact us at 1-800-956-4437 if you have questions about connecting an ICA system to Delphin hardware or software.
Delphin Upgrades ProfiSignal Measurement Software
Version 4.2.10 Available for Download at CAS DataLoggers CAS DataLoggers and Delphin Technology are proud to announce the release of an improved version of Delphin’s popular ProfiSignal data acquisition software. Version 4.2.10 adds new bug fixes as suggested by users around the world. You can download the new version from our Delphin Downloads page at http://www.dataloggerinc.com/downloads/delphin.php. Whether you work in test, process control or another application, at CAS DataLoggers we can
Precision Electrical Measurement Using Delphin
Fully-Automated Engine Test Stands Motor Test stands are required during the automotive R&D phase for serial testing and also for endurance trials. Measurements taken during the developmental phase such as Temperature and Voltage are fully-automated whenever possible. Sensors check the electrical and mechanical properties of the test sample as well as temperature patterns and overload operation. Testing conditions can vary widely--from the tiniest of motors to large drives in the megawatt
Delphin Systems Provide SDI-12 Sensor Integration
Versatile Data Logger Connects to Enviro Smart Sensors The SDI-12 interface (Serial Data Interface at 1200 Baud) enables, via a digital signal, the establishment of a connection with multiple "low-power" sensors and a data logger. Sensors can be operated on the bus with asynchronous, serial communication protocols. Such sensors (e.g. for soil moisture, soil temperature, air humidity, water potential, electrical conductivity, etc.) are primarily used in environmental engineering. Now users can
Delphin Technology Exhibiting at Hannover Messe 2016!
The World’s Leading Trade Fair for Industrial Technology on April 25-29 CHESTERLAND, OH—March 29, 2016 It’s almost April and one of the biggest industrial tradeshows in the world is about to get underway! If you happen to be in Germany this April, come visit Delphin Technology 25-29 April at Hannover Messe at Stand B51 in Hall 11. Delphin’s Frank Ringsdorf will be in attendance all week, showing visitors how Delphin data loggers