openPR Logo

Press Releases from Kelch GmbH (13 total)

Machine spindles: app-based process safety

Maximum precision with KELCH Safecontrol 4.0 Measure, read and save ergonomically Weinstadt, 06. November 2019 - The system supplier KELCH GmbH is upbeat about the demand for Safecontrol 4.0. The manufacturer stated that many of the discussions held at this year’s EMO 2019, the leading global trade fair for metalworking, highlighted users' high level of satisfaction with the product. The well-known system for measuring the pull force of machine spindles provides

KENOVA set line H343 offers maximum flexibility for assembly of table adapters

The system supplier KELCH will be showcasing innovative process optimisation developments at EMO, held in Hanover from 16 to 21 September, including for the first time the redesigned H3 series from the successful KENOVA set line range of tool presetters. The range is designed especially for end users who require a simple introduction to tool presetting. The tool presetters combine maximum flexibility in terms of adapter assembly with a high

KELCH IoT achieves cloud-based process control

KELCH, Teamviewer and Vodafone innovation Weinstadt, 22. July 2019 – Jointly with Teamviewer and Vodafone, the system supplier KELCH has developed a new IoT (Internet of Things) solution offering cloud-based process and status control. Companies can now pro-actively prevent impending system failures and costly production downtime. The innovation is marketed as the KELCH IoT and is designed to systematically control KELCH tool presetters. Failure-prone processes can be immediately identified and corrected

KELCH receives delegation from China

Chinese state-owned group Genertec visits Weinstadt Factory tour and discussions for the international top executives Weinstadt, 1st April 2019 – KELCH GmbH, the system supplier, received an international delegation of the China General Technology Holding Co., Ltd. (Genertec), at the end of march. This influential state-owned Chinese conglomerate includes Harbin Measuring & Cutting Tool Group Co., Ltd. (HMCT), the parent company of KELCH, making KELCH a sub-subsidiary and a “grandchild” of Genertec.

KELCH QR – Smart Factory set-up for SMEs

Transmission of process-reliable data Minimum time and cost outlay Weinstadt, 21 March 2019 – KELCH, the system supplier, is launching KELCH QR: a cost-effective solution enabling companies to comply with Industry 4.0 level Smart Factory standards without major expenditure. The solution is of particular interest to companies that do not wish to introduce a complete tool management system nor install cost-intensive RFID processes. Under the auspices of Industry 4.0, these companies

Now available to buy: KELCH Safecontrol 4.0 - Separate app provides additional n …

Weinstadt, 17 April 2018 - KELCH GmbH, the system supplier, is launching the latest generation of Safecontrol 4.0 for machine tools in the 2nd quarter of 2018. The proven system for measuring the pull force of machine tool spindles has been fully revised and now offers users maximum flexibility with its own app. Further features include maximum process reliability combined with ease of use and an ergonomic product design. The latest

EMO 2017: KELCH launches Safecontrol III / System fully revised, expandable with …

EMO Hanover from 18-23 September 2017: Hall 4, Stand C26 Weinstadt, 25.08.2017. Kelch GmbH, which specialises in peripherals and services for manufacturers and users of machine tools for cutting processes, will be showcasing the Safecontrol III system at this year’s EMO in Hanover. The system was developed to measure the pull force of the machine spindle. This is not just an enhancement to the well-known Safecontrol II, but rather a fully

KELCH KENOVA set line V9xx-S System concept to meet the most demanding requireme …

Weinstadt, 24.08.2017. Kelch GmbH, which specialises in peripherals and services for manufacturers and users of machine tools for cutting processes, is launching a new system concept for a tool presetter from the KELCH KENOVA set line V9xx-S range. The focus here is on the redesign of the shrink fit equipment and side unit. The redesign also incorporates a redesigned control panel and innovative components, including an operating monitor with touchscreen

KELCH KENOVA set line V6 – now in a package with TDM Modules

Tool selection up to 50% faster – Tool provision up to 30% faster – Software in over 20 languages Weinstadt, 12.07.2017. Kelch GmbH, which specialises in peripherals and services for manufacturers and users of machine tools for cutting processes, is now also launching the latest generation of KENOVA tool presetters in conjunction with modules produced by TDM Systems, the Tool Data Management specialists. The TDM Base Module minimises the time needed

Change at the top of Kelch

Weinstadt, 18.08.2016. The Executive Board of Kelch GmbH was reorganised on 1 August 2016. Frank Wildbrett was appointed Managing Director and in this role forms the company's new senior management team together with the two authorised officers Viktor Grauer and Siegfried Taibinger. Responsibility In his new position, Frank Wildbrett will be responsible for Sales, Engineering and Finance. At his side will be Viktor Grauer, Head of Innovation Management. The third person in

The aim is to minimise process steps / Tool room or tool logistics concepts for …

Weinstadt, 29.07.2016. Kelch GmbH offers to plan and project manage a smart tool room or tool logistics concept. The concepts have many aspects yet only a single aim: to minimise process steps. Kelch is therefore assisting Production Managers with the continuous control of the production process chain solely by simplifying and separating complex process steps into simple and easily controllable steps. The service comes from the Smart Factory Services programme,

New from Kelch: Smart Factory Services / Industry 4.0-compatible complete soluti …

Weinstadt, 12.04.2016. Kelch GmbH offers an integrated and networked complete solution for Industry 4.0. The service is based on the following combinable modules: Planning, Digitalisation, Integration, Optimisation, Procurement, Storage and Financing. These modules form the core issues around tools and their associated processes. Targeted measures to optimise data flow in productions are derived from them, enabling customers to save time and money, as well as systematically and simultaneously optimising quality. Kelch

Software ensures precise measured data values

Safecontrol: Software enhances proven force sensing bar and readout unit (30th Control – International trade fair for quality assurance, Stuttgart 26 - 29 April 2016, Hall 1, Stand 1128) Weinstadt, 10.03.2016. Kelch GmbH offers configuration and evaluation software for your computer and is intended to enhance and complement the existing Safecontrol system. Kelch has announced that it will be launching an app in future for mobile devices, like smartphones and tablets. The

Go To Page:   1 2 3 4 5 6 7 8 9 10