Press release
piezo microscope objective fine positioner series MIPOS for nanopositioning
piezosystem jena, provider of piezo electrical stages for micro- and nanopositioning, offers a series of positioning systems - MIPOS for high-precise focusing of microscope objectives. The MIPOS series feature a motion of up to 500µm for the microscope objective in combination with nanometer accuracy.The design, which the incorporates a pre-load of the actuator, permits a high resonant frequency of up to 410 Hz and high parallel travel, as well as an upside-down version for inverse microscopes.
The motion of the MIPOS system is continuous when controlled by an analog signal of the piezo amplifier. The resolution of piezo electrical stages is only limited by the signal noise of the control signal. This allows a positioning accuracy in the range of nanometers. Solid state hinges free of play guarantee a high dynamic.
The MIPOS is fixed by an adapter on the microscope. The system can be equipped with all standard thread-rings and hence they are adaptable to all typical models.
piezosystem jena can provide a lens diameter of up to 40 mm.
An optional feedback sensor compensates hysteresis and drift and offers high stability and linearity in closed-loop operation.
The fine positioners of the series MIPOS are an excellent choice for applications such as surface scanning and analysis, AFM microscopy, biotechnology (e.g. cell scanning), beam focusing for printing processes and semiconductor test equipment.
http://www.piezojena.de/index.php4?pre_cat_open=137&id=180&subid=196
piezosystem jena is a world leading company in the development, design and engineering of piezoelectrical actuator-based positioning systems for micro- and nanopositioning and nano-automation. In addition to the positioning stages the company also offers optical fiber switches as well as the support electronics.
The extensive experience in developing and manufacturing a diverse range of nanopositioning systems enables us to provide special systems and also OEM manufacturing.
The piezo actuators and positioning stages are characterized by a unique precision in the range of nanometer, generate forces of serveral thousand Newton and realize precise positionings in micro seconds.
more information about our products:
http://www.piezojena.com/en/products__services/site__185/
piezosystem jena GmbH
Pruessingstrasse 27
07745 Jena
tel: +49 3641 66880
fax: +49 3641 668866
sales@piezojena.com
http://www.piezojena.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release piezo microscope objective fine positioner series MIPOS for nanopositioning here
News-ID: 61455 • Views: …
More Releases from piezosystem jena GmbH
Objective Positioners Adapted To Meet Your Needs For Industrial Applications
piezosystem jena has extended the objective positioner series MIPOS with two new industry products.
Typically objective positioners are firmly mounted directly onto a microscope. Piezosystem also introduces two new systems, which can be screwed on a machine or rail.
MIPOS 140:
Most installed lens positioners require an undesired extension to the optical axis. The distance between the lens and the sample is shortened. This can lead to collisions between the optics and the…
Incremental Trigger Function
Trigger signals dependent on the position of the stage
Digital piezo-controllers from piezosystem jena (d-Drive and d-Drivepro) offer flexible control for customized systems such as cameras, illumination systems, optical shutters or external measuring systems.
Now, piezosystem jena can offer a comfortable trigger function.
Trigger signals can be generated dependent on the position of the stage:
• Rising edge
• Falling edge
• On both edges in the direction of movement
An additional function sends out a trigger…
New Product-Catalog from piezosystem jena
Positioning Solutions with Sub-Nanometer-Precision; Movements up to Multiple Centimeters/ Inches
piezosystem jena introduces its brand-new catalog! To offer you complete systems for your needs, piezosystem jena has engineered and produced a NEW series of Motion Control Stages and High-Power Piezo-Composite Actuators.
The new catalog does not only show our proven, ultra-precise nanopositioning piezo stages for positioning with sub-nanometer accuracy and their appropriate controllers; it also incorporates our powerful Piezo-Composite Actuators and their…
Beam Tracking with Mirror Tip- and Tilting Piezostage PKS1
In biology applications a laser beam is used for cell stimulation. First the laser beam is redirected onto 2 mirrors then directed to the cells. An important requirement, to hold the laser beam onto the cell is very difficult to achieve due to thermal effects or external vibration. The position of the laser beam needs to be controlled in real-time to track the motion of the cell.
For this task a…
More Releases for MIPOS
Objective Positioners Adapted To Meet Your Needs For Industrial Applications
piezosystem jena has extended the objective positioner series MIPOS with two new industry products.
Typically objective positioners are firmly mounted directly onto a microscope. Piezosystem also introduces two new systems, which can be screwed on a machine or rail.
MIPOS 140:
Most installed lens positioners require an undesired extension to the optical axis. The distance between the lens and the sample is shortened. This can lead to collisions between the optics and the…
Incremental Trigger Function
Trigger signals dependent on the position of the stage
Digital piezo-controllers from piezosystem jena (d-Drive and d-Drivepro) offer flexible control for customized systems such as cameras, illumination systems, optical shutters or external measuring systems.
Now, piezosystem jena can offer a comfortable trigger function.
Trigger signals can be generated dependent on the position of the stage:
• Rising edge
• Falling edge
• On both edges in the direction of movement
An additional function sends out a trigger…
MIPOS 16 -158: Z-axis positioner for high performance white light interferometry
piezosystem jena presents the new MIPOS 16 - specifically designed for high precision positioning of optical systems with an accuracy in the sub-nanometer range. The high resolution and fast response time of the MIPOS 16 offer new possibilities for interferometry.
Based on its unique design with a 158 mm aperture and a stage height of 42 mm, the MIPOS 16-158 offers technical specifications matching the requirements of white light…
piezo - nanopositioner nanoMIPOS 400 CAP for micro objectives now available with …
piezosystem jena has expanded the series MIPOS with the introduction of the nanoMIPOS400 CAP. For the first time ever, this large range of outstanding micro-objective focusing devices will be available in a digital version.
The nano positioner provides a travel of 450 microns with nanometer resolution.
The special bidirectional nanoX flexure design allows for a high dynamic and extremely accurate guidance. The integrated positioning sensors guarantee long-term stable positioning,…
exhibition OPTATEC 2008 - 10% discount of microobjective positioner
Visit us at the Optatec 2008 in Frankfurt!
piezosystem jena will be exhibiting on the Optatec 2008 in Frankfurt, Germany from June 17th until 20th, 2008.
Visit us and find out more information about our new and successful systems for nano positioning and nano automation, digital controller electronics and high speed actuators.
The Optatec has already established itself as an international exhibition, and presents the entire spectrum of optics, optoelectronics, laser technology…
