exhibition OPTATEC 2008 - 10% discount of microobjective positioner
piezosystem jena will be exhibiting on the Optatec 2008 in Frankfurt, Germany from June 17th until 20th, 2008.
Visit us and find out more information about our new and successful systems for nano positioning and nano automation, digital controller electronics and high speed actuators.
The Optatec has already established itself as an international exhibition, and presents the entire spectrum of optics, optoelectronics, laser technology and fibre optics, as well as optical transmission and information technologies.
Make the most of your time at this trade show - make an appointment or contact us per email: firstname.lastname@example.org
Further we provide you at there an exhibition-offer:
We will provide you this discount for purchasing these systems:
MIPOS 100 PL SG + NV 40/1 CLE
MIPOS 100 PL CAP + NV 40/1 CLE
MIPOS 100 PL-series
- 100 μm full adjustment range
- for microobjectives and lenses with diameter up to 40mm
- special preloaded version for high resonant frequency
- optional high resolution positioning feed back system inside
- easily installed on microscopes with Flex-Adapter
- parallelogram construction
- applicable in upright and inverse microscopes
Find out all details on our data sheet on the website www.piezojena.com.
If you have any questions please contact us.
We are looking forward to welcoming you at our booth!
piezosystem jena GmbH
tel: +49 3641 66880
fax: +49 3641 668866
piezosystem jena is a world leading company in the development, design and engineering of piezo, piezo electrical actuator based positioning systems for micro- and nanopositioning and nano-automation.
All piezo stages and ceramic systems are designed by FEA and measured using special interferometric metrology equipment.
piezosystem jena is experienced in the development of special systems and OEM manufacturing.
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release exhibition OPTATEC 2008 - 10% discount of microobjective positioner here
News-ID: 46141 • Views: 1072
More Releases from piezosystem jena GmbH
Objective Positioners Adapted To Meet Your Needs For Industrial Applications
piezosystem jena has extended the objective positioner series MIPOS with two new industry products. Typically objective positioners are firmly mounted directly onto a microscope. Piezosystem also introduces two new systems, which can be screwed on a machine or rail. MIPOS 140: Most installed lens positioners require an undesired extension to the optical axis. The distance between the lens and the sample is shortened. This can lead to collisions between the optics and the
Incremental Trigger Function
Trigger signals dependent on the position of the stage Digital piezo-controllers from piezosystem jena (d-Drive and d-Drivepro) offer flexible control for customized systems such as cameras, illumination systems, optical shutters or external measuring systems. Now, piezosystem jena can offer a comfortable trigger function. Trigger signals can be generated dependent on the position of the stage: • Rising edge • Falling edge • On both edges in the direction of movement An additional function sends out a trigger
New Product-Catalog from piezosystem jena
Positioning Solutions with Sub-Nanometer-Precision; Movements up to Multiple Centimeters/ Inches piezosystem jena introduces its brand-new catalog! To offer you complete systems for your needs, piezosystem jena has engineered and produced a NEW series of Motion Control Stages and High-Power Piezo-Composite Actuators. The new catalog does not only show our proven, ultra-precise nanopositioning piezo stages for positioning with sub-nanometer accuracy and their appropriate controllers; it also incorporates our powerful Piezo-Composite Actuators and their
Beam Tracking with Mirror Tip- and Tilting Piezostage PKS1
In biology applications a laser beam is used for cell stimulation. First the laser beam is redirected onto 2 mirrors then directed to the cells. An important requirement, to hold the laser beam onto the cell is very difficult to achieve due to thermal effects or external vibration. The position of the laser beam needs to be controlled in real-time to track the motion of the cell. For this task a
More Releases for Optatec
Jenoptik´s Optical Systems division with new Technologies at Optatec 2012
Jenoptik´s Optical Systems division presents at Optatec 2012 optical systems and components from its Optics, Microoptics und Optoelectronic Systems business units. The company also shows new Hybrid-DLC-Coatings, CaF2 Microoptics and Anti-reflection coated polymer optics produced by innovative technologies. Visit us at OPTATEC in Frankfurt, from May 2012, 22nd to 25th, in hall 3, booth B12. Our Team is looking forward to welcome you! Hybrid-DLC Coatings for Infrared Optics Jenoptik´s Optical Systems division will
Blue Laser Light – Precision Pure: Monolithic Focusing Optics for Single Emitt …
Dortmund-based LIMO Lissotschenko Mikrooptik GmbH is far from being a greenhorn when it comes to blue laser light. The new trend is towards single emitter diode lasers (spectral width: 420 to 470 nanometres) which, due to higher outputs of up to 1-2 W, are becoming increasingly popular in lithographicy, the structuring of flat panel displays and in measuring technology (e.g. in particle analysis). The blue semiconductor laser emitters' claim to