openPR Logo
Press release

HIGH-QUALITY SOFTWARE ON LAND AND IN THE AIR

01-28-2016 09:36 AM CET | IT, New Media & Software

Press release from: Model Engineering Solutions GmbH

Model Engineering Solutions GmbH (MES)

Model Engineering Solutions GmbH (MES)

MES launches two new projects: Model-based software development in avionics and software development methodology for multicore processors.

Berlin (Germany), October 27, 2015: Model Engineering Solutions (MES) starts two new research projects this fall. The objective of MCAS, funded by the Federal Ministry of Economic Affairs and Energy, is to develop a software model verification procedure to safeguard the current safety standard for avionics. The second research project, ASSUME, concerns itself with the necessary computing capacity of future systems, as required by autonomous cars, for example. Based in Berlin, MES can fully draw on its core expertise to increase model quality in both projects.

Developing new verification procedures in avionics for DO-331
In cooperation with the Department of Flight Mechanics, Flight Control, and Aeroelasticity at the Technical University of Berlin headed by Prof. Dr. Luckner, MES will develop new test procedures to safeguard software models in avionics. The focus will be on compliance with the requirements of the aircraft standard RTCA DO-331 “Model-Based Development and Verification Supplement to DO-178C and DO-278”. The verification procedures and modeling guidelines developed in compliance with DO-331 should facilitate the use of model-based development for small and medium enterprises in particular, enabling them to develop software more efficiently. This project allows MES to apply its in-depth expertise in testing standard-compliant software models from the automotive industry to avionics – a veritable takeoff.

Autonomous driving and its challenges for software development
The second major project is dedicated to future mobility solutions. Networked cars collect diverse information about the surroundings of vehicles through a large number of sensors. This data must be processed during the journey to allow driver-independent vehicle control – a major challenge for technology and software development. The use of software on multiple ECUs with drastically greater complexity and the application of multicore processors must be safeguarded in the process. Therefore, in the ASSUME project, MES will conceive a new development methodology and new safeguarding procedures for software running on multicore processors. The goal is to develop an integral framework to measure product quality and thereby eliminate software errors.

About MES: Läuft die Software, fährt das Auto
Model Engineering Solutions GmbH (MES) specializes in integrated quality assurance of embedded automotive software. MES Model Examiner® (MXAM) is the first choice for checking modeling guideline consistency of Simulink®, TargetLink®, and ASCET® models. MES Test Manager® perfectly implements requirements-based testing in model-based development. MES Quality Commander® (MQC) is a dynamic management and control tool for use in software development projects, delivering key decision-making data throughout the product development lifecycle. MES provides individual consulting and services to companies seeking to introduce or enhance their model-based development processes, to introduce new technologies such as AUTOSAR, or to fulfill standards such as ISO 26262. MES clients include major OEMs and suppliers to the automotive industry worldwide. MES is a TargetLink® Strategic Partner of dSPACE GmbH and a MathWorks and ETAS Product Partner.

For further information please contact:

Inga Töller, Sales & Marketing Manager
Model Engineering Solutions GmbH (MES)
Mauerstrasse 79, 10117 Berlin (Germany)

Tel: +49 30 2091 6463 14
Fax: +49 30 2091 6463 33

Email: inga.toeller@model-engineers.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release HIGH-QUALITY SOFTWARE ON LAND AND IN THE AIR here

News-ID: 318707 • Views: 979

More Releases from Model Engineering Solutions GmbH

New guideline documents available in MXAM DRIVE
MXAM DRIVE v.3.8 with extended content addressing Embedded Coder® users and ASCET® users. April 06, 2016, Berlin: Model Engineering Solutions (MES), software specialists from Berlin, enhanced their software tool MES Model Examiner DRIVE® (MXAM DRIVE) with two new guideline documents. Adherence to modeling guidelines is the best practice for improving the quality of software models. However, with over 500 guidelines published by automotive consortia, plus a huge number of company- and
MXAM DRIVE – The first choice for guideline checking
MXAM DRIVE is the platform-independent tool for guideline checks in model-based software development. April 06, 2016, Berlin: The guideline compliance checking tool MES Model Examiner® (MXAM) from Model Engineering Solutions (MES) has undergone a remarkable product development over recent years. The fruitful feedback of customers has supported the continuous growth of MXAM significantly. From MXAM to MXAM DRIVE Requests for diverse additional functionalities led to the introduction of a new tool platform
Everything in View with the Assessment Analyzer
Berlin, 07 October 2015: Model Engineering Solutions GmbH (MES) has added an Assessment Analyzer to its proven MTest testing tool. This interactive, graphical addition to the MTest Assessment Framework makes it easy to visualize selected test sequences and inspect them thoroughly – making systematic and fully-automated model and software testing a considerably easier task. Assessment Analyzer extends established MTest Assessment Framework MES developed the Assessment Framework as an integral part of MTest
MES Joins SafeTRANS Network
Berlin (Germany), April 28, 2015: Model Engineering Solutions (MES), specialists in embedded software from Berlin, has become a member of the international competence network SafeTRANS. SafeTRANS is an association of prestigious enterprises and scientific institutions that ensures exchange between research and industry in embedded systems for transportation. The goal of the network is to increase the safety of transportation with the help of cutting-edge technology and optimized processes. Focus of the

All 5 Releases


More Releases for MES

MES Joins SafeTRANS Network
Berlin (Germany), April 28, 2015: Model Engineering Solutions (MES), specialists in embedded software from Berlin, has become a member of the international competence network SafeTRANS. SafeTRANS is an association of prestigious enterprises and scientific institutions that ensures exchange between research and industry in embedded systems for transportation. The goal of the network is to increase the safety of transportation with the help of cutting-edge technology and optimized processes. Focus of the
MES SUPPORTS 13TH AUTOMOTIVE SOFTWARE ENGINEERING WORKSHOP
Tackling the Challenges of Automotive Software Engineering in Transition to Smart Mobility Berlin (Germany), March 23, 2015: Model Engineering Solutions GmbH (MES) and the Brandenburg University of Technology (BTU) will be organizing this year’s Automotive Software Engineering Workshop of the German Informatics Society (GI), which will be held at the BTU in Cottbus on September 29, 2015. The call for papers has already begun and contributions can be submitted until April
MES: Expansion in Asia
Berlin, November 24, 2014: Model Engineering Solutions (MES), the Berlin-based specialist for model-based software development, has significantly expanded its business in Asia. In recent years, MES has built up a network of local partners in Japan, Korea, China, and India in order to benefit from the growing market and increasing interest in model-based development and ISO 26262 in Asia. Asia: Driving force in the automotive industry The automotive industry continues
Summer Webinars: The MES Webinar Series Continues
Berlin, 19.08.2014: Model Engineering Solutions (MES), the Berlin-based experts in model-based software development, will be continuing its successful webinar series over the summer months. The series is designed to inform you about current ideas and challenges in model-based software development with a focus on the automotive industry. The webinars are conducted by MES experts with extensive industry experience. They are held in English and are free of charge. Sessions conclude
SAP MES Day: Producing upon customer request
Liestal (CH), May 21, 2014 – Trebing + Himstedt, SAP MES expert for consulting, implementation and licensing of SAP solutions in the production environment and SAP (Schweiz) AG would like to invite you to the SAP MES Day for discrete manufacturing on June 24, 2014 in Regensdorf (ZH), Switzerland. Participation is free. On this day, the SAP MES experts Trebing + Himstedt and SAP will provide information based on numerous
MES & Process Minds Europe 2013
Automation & Control - Improving Operational Excellence in Process Industry Manufacturing operations by implementing Comprehensive & Compliant Data and Information Platform & Integrated IT systems| 30th September– 1th October 2013, Maritime ProArte Hotel Berlin, Germany http://pharma-mes2013.we-conect.com/ "Very good and informative conference to share knowledge and to benchmark your company in your industry sector." Kathrin Wilhelm, Fresenius Kabi D-GmbH By popular demand, we.CONECT is bringing board-level attendees from manufacturing execution systems management from all over