openPR Logo

Press Releases from Model Engineering Solutions GmbH (23 total)

New guideline documents available in MXAM DRIVE

MXAM DRIVE v.3.8 with extended content addressing Embedded Coder® users and ASCET® users. April 06, 2016, Berlin: Model Engineering Solutions (MES), software specialists from Berlin, enhanced their software tool MES Model Examiner DRIVE® (MXAM DRIVE) with two new guideline documents. Adherence to modeling guidelines is the best practice for improving the quality of software models. However, with over 500 guidelines published by automotive consortia, plus a huge number of company- and

MXAM DRIVE – The first choice for guideline checking

MXAM DRIVE is the platform-independent tool for guideline checks in model-based software development. April 06, 2016, Berlin: The guideline compliance checking tool MES Model Examiner® (MXAM) from Model Engineering Solutions (MES) has undergone a remarkable product development over recent years. The fruitful feedback of customers has supported the continuous growth of MXAM significantly. From MXAM to MXAM DRIVE Requests for diverse additional functionalities led to the introduction of a new tool platform

HIGH-QUALITY SOFTWARE ON LAND AND IN THE AIR

MES launches two new projects: Model-based software development in avionics and software development methodology for multicore processors. Berlin (Germany), October 27, 2015: Model Engineering Solutions (MES) starts two new research projects this fall. The objective of MCAS, funded by the Federal Ministry of Economic Affairs and Energy, is to develop a software model verification procedure to safeguard the current safety standard for avionics. The second research project, ASSUME, concerns itself with

Everything in View with the Assessment Analyzer

Berlin, 07 October 2015: Model Engineering Solutions GmbH (MES) has added an Assessment Analyzer to its proven MTest testing tool. This interactive, graphical addition to the MTest Assessment Framework makes it easy to visualize selected test sequences and inspect them thoroughly – making systematic and fully-automated model and software testing a considerably easier task. Assessment Analyzer extends established MTest Assessment Framework MES developed the Assessment Framework as an integral part of MTest

MES Joins SafeTRANS Network

Berlin (Germany), April 28, 2015: Model Engineering Solutions (MES), specialists in embedded software from Berlin, has become a member of the international competence network SafeTRANS. SafeTRANS is an association of prestigious enterprises and scientific institutions that ensures exchange between research and industry in embedded systems for transportation. The goal of the network is to increase the safety of transportation with the help of cutting-edge technology and optimized processes. Focus of the

MES SUPPORTS 13TH AUTOMOTIVE SOFTWARE ENGINEERING WORKSHOP

Tackling the Challenges of Automotive Software Engineering in Transition to Smart Mobility Berlin (Germany), March 23, 2015: Model Engineering Solutions GmbH (MES) and the Brandenburg University of Technology (BTU) will be organizing this year’s Automotive Software Engineering Workshop of the German Informatics Society (GI), which will be held at the BTU in Cottbus on September 29, 2015. The call for papers has already begun and contributions can be submitted until April

MES: Expansion in Asia

Berlin, November 24, 2014: Model Engineering Solutions (MES), the Berlin-based specialist for model-based software development, has significantly expanded its business in Asia. In recent years, MES has built up a network of local partners in Japan, Korea, China, and India in order to benefit from the growing market and increasing interest in model-based development and ISO 26262 in Asia. Asia: Driving force in the automotive industry The automotive industry continues

MXAM DRIVE: New Version 3.2 of the Tool for Static Model Analysis

Berlin, November 06, 2014 – The new version 3.2 of MES Model Examiner® DRIVE (MXAM) is now available. The market-leading checking tool for modeling guidelines has been enhanced with multiple new functions by MES’s team of developers in Berlin, who also carried out maintenance of the product. Multi-platform – MXAM 3.2 now with ASCET 6.2.1. adaptor Thanks to the flexible adaptor layer of the MES Model Examiner® (MXAM), other formats such

New Webinar Dates for 2014

Berlin, 29.10.2014: The ongoing webinar series hosted by Model Engineering Solutions GmbH (MES) provides key information and updates on current concepts and challenges in model-based software development. As always, the focus will be on applications in the automotive industry. The webinars are conducted by MES experts with extensive industry experience; they are held in English and are free of charge. Sessions always conclude with a Q&A round with the webinar

Summer Webinars: The MES Webinar Series Continues

Berlin, 19.08.2014: Model Engineering Solutions (MES), the Berlin-based experts in model-based software development, will be continuing its successful webinar series over the summer months. The series is designed to inform you about current ideas and challenges in model-based software development with a focus on the automotive industry. The webinars are conducted by MES experts with extensive industry experience. They are held in English and are free of charge. Sessions conclude

MXAM 3.1: Better Reports Thanks to Annotations

Berlin, July 17, 2014: MES Model Examiner® DRIVE (MXAM) has been enhanced with a new functionality. It is now easy to add comments on each guideline violation to MXAM compliance reports. These annotations are particularly important if guidelines should be disregarded for project-specific reasons, or if particular guidelines do not, or only in part apply to a model. Such deviations from the norm must be documented in a comprehensible and

Automatically Without Contradictions

Automation of test processes The ever-increasing complexity of development projects combined with increasing demands on quality make intelligent, automated test processes indispensable. As a result, safety standards explicitly demand the requirements-based testing of software. This still remains a challenge for vehicle manufacturers and their suppliers, because the manual verification of test results and their comparison with software requirements is a time-intensive and error-prone task. To solve this problem, Model Engineering Solutions

MXAM DRIVE: From Guideline Checker to Comprehensive Model Analysis

Berlin, 05.06.2014 – A new release of the MES Model Examiner® (MXAM) is now available. Version 3.1, otherwise known as DRIVE, is a completely new development. The established functions of versions 1.x have been completely reimplemented and substantial additions have been made. Broad Analysis Spectrum In addition to checking Simulink and TargetLink software models, a flexible adapter layer now enables you to check other development artifacts such as ASCET models.

MES Model Examiner® 1.8 Release with Many Improvements

Berlin, 02.06.2014 – MES Model Examiner® (MXAM) is now available as Version 1.8.2. This version contains many new improvements and is ideal for customers, who do not yet wish to switch to the current Version 3.x DRIVE of the MES Model Examiner®. More Flexible Licensing Options The use of FLEXnet gives customers additional licensing options in Version 1.8. In addition to the classic work station license (node-locked) and a dongle

MES Model Examiner® at Volkswagen: Interface Optimization in the Model-based Pr …

Berlin, 18.03.2014 - The function range of the software tool MES Model Examiner® has been considerably enhanced. In addition to verifying TargetLink, ASCET and Simulink models, it now supports the checking of Excel documents containing requirements and interface definitions. Volkswagen is one of the first to deploy this latest version. Designed by Model Engineering Solutions (MES), the Berlin-based expert for model-based development, the software tool MES Model Examiner® has undergone substantial

Comfortable Testing – Cleverly Combined

Berlin, Munich, 8.11.2013 – The new interface of MTest enables a fully automated transfer of test specifications from the classification tree editor CTE XL Professional. The direct data transfer makes testing and evaluation of MiL-, SiL-, and PiL-simulations with MTest in compliance with ISO 26262 regulations remarkably convenient and efficient. The target-oriented implementation of the legal requirements of ISO 26262 such as equivalence class testing and boundary-value analysis has never

Innovation at its Best

Berlin, 17.10.2013– Model Engineering Solutions (MES) introduces latest products Quality Checker and Model Examiner DRIVE to the public at VDI Electronic Systems for Motor Vehicles. With these innovations MES once again demonstrates technological leadership in quality assurance of model-based software development. MES reveals both products at VDI Electronic Systems for Motor Vehicles in Baden-Baden (Germany), at booth No. 68 on the first floor of the exhibition hall. Shine a Searchlight

MXAM 1.7: Check Larger Models even Faster

Model Examiner 1.7 is considerably faster than its predecessor and even better at handling larger models Berlin, 16.05.2013 – Model Engineering Solutions (MES) is the specialist in model-based quality assurance for embedded vehicle software. With release 1.7, we have significantly improved the analysis speed of our Model Examiner tool. This triumph in performance highlights the position of the analysis tool as market leader, and is especially beneficial for checking

Siemens Inside e-Car: The Customized Process

MES introduces model-based development process for safety-critical vehicle functions in accordance with ISO 26262 at Siemens Berlin, 24.01.2012 – Siemens Industry Drive Technologies Inside e-Car has added model-based development with the dSPACE tool chain to its classic software development activities for realizing safety-critical vehicle functions. The move involved defining a new process that satisfies the requirements of the ISO 26262 standard. The process was introduced with the help of dSPACE

Dr. Heiko Dörr Joins Model Engineering Solutions GmbH Management as Third Execu …

With the appointment of Dr. Heiko Dörr as third Executive Director, Model Engineering Solutions opens a Project Management business unit and lays the foundation stone for further growth. Berlin, 4 December 2012 – From 9 November 2012, Dr. Heiko Dörr joins the management board of Model Engineering Solutions GmbH. In his new position, Dr. Dörr is responsible for the company’s Project Management business unit, which pools resources for the management of

SDT-Toolbox: Securing Functional Safety at Model Level

The Strong Data Typing Toolbox (SDT-Toolbox) extension for the Model Examiner checks Simulink and TargetLink models for aspects of functional safety in accordance with IEC 61508, ISO 26262, and DO-178 B, thereby helping developers identify potential problems at an early stage. Berlin, 17 May 2011 – Model Engineering Solutions GmbH (MES) from Berlin has announced the first official release 1.3 of its SDT-Toolbox, the new extension for the popular Model

Enhanced Guideline Checking with Model Examiner MXAM 1.4

The Model Examiner (MXAM) checks the guideline compliance of Simulink® and TargetLink® models, ensuring consistency with established industry standards and company guidelines, and offering automated repair of detected guideline violations. Berlin, 26 November 2009 – Model Engineering Solutions GmbH from Berlin has announced the release of the Model Examiner 1.4 – the newest version of their proven guideline compliance checker for Simulink® and TargetLink® models. MXAM 1.4 now offers extended documentation

Streamlined Simulink® and TargetLink® Model Testing with MTest classic 2.4

MTest classic is a model test management framework, tightly integrated into the MATLAB® development environment. It supports efficient unit testing of Simulink® and TargetLink® models as a crucial part of the model-based development of embedded control software. Berlin, 06 October 2009 – Model Engineering Solutions GmbH from Berlin has announced the release of MTest classic 2.4 – the newest version of their accomplished model test manager for Simulink® and TargetLink®.

Go To Page:   1 2 3 4 5 6 7 8 9 10