openPR Logo
Press release

Everything in View with the Assessment Analyzer

01-28-2016 09:30 AM CET | IT, New Media & Software

Press release from: Model Engineering Solutions GmbH

Berlin, 07 October 2015: Model Engineering Solutions GmbH (MES) has added an Assessment Analyzer to its proven MTest testing tool. This interactive, graphical addition to the MTest Assessment Framework makes it easy to visualize selected test sequences and inspect them thoroughly – making systematic and fully-automated model and software testing a considerably easier task.

Assessment Analyzer extends established MTest Assessment Framework

MES developed the Assessment Framework as an integral part of MTest to fulfill the strong demand for automated requirements coverage and test results evaluation. Highly automated test evaluation now makes it possible to test hundreds of requirements simultaneously. This approach proves much more effective than only verifying requirements through targeted test cases. The direct result is a considerably higher test coverage and more reliable detection of software errors.

The Assessment Analyzer is a consistent, logical extension to the Assessment Framework. Its interactive, graphical user interface allows you to follow and inspect preselected signals. This gives the user complete control over the test-relevant timeframe, making it easy to determine when test cases fail at particular events or times – and what the possible causes might be.

The use of MTest in practice

MTest is used by leading manufacturers and suppliers to the automotive industry for safeguarding their software models, especially for safety-critical systems such as electronic brakes and active steering. MTest is based on Simulink and is optimized for the series use of TargetLink® and Embedded Coder®.

Introduction to webinar: ISO 26262-compliant testing with MTest 3.2

Requirements-based testing is the most important instrument in software testing – and the ISO 26262 safety norm concurs. But how to best carry out requirements-based testing in line with this standard and how to implement the norms that relate to software testing in practice? Our MES expert webinar gives an introduction to this topic and shows how these requirements are best implemented in practice using the MES Test Manager (MTest, Version 3.2). There will be an opportunity for questions following the webinar. The webinar will be held in English on two dates: 24.11.2015 at 16.00-17.00 CET and on 25.11.2015 at 10.00-11.00 CET.

Please register for the webinar here: http://www.model-engineers.com/en/webinars.html

About MES: Läuft die Software, fährt das Auto

Model Engineering Solutions GmbH (MES) is the competence center for model-based software in the car. MES Model Examiner® (MXAM) is the first choice for checking modeling guidelines. MES Test Manager® perfectly implements requirements-based testing in model-based development. MES Quality Commander® (MQC) assesses the quality and product readiness of your software, delivering key decision-making data throughout the product development lifecycle. MES provides individual consulting and services to companies seeking to introduce or enhance their model-based development processes, to introduce new technologies such as AUTOSAR, or to fulfill standards such as ISO 26262. MES clients include major OEMs and suppliers to the automotive industry worldwide. MES is a TargetLink® Strategic Partner of dSPACE GmbH and a MathWorks and ETAS Product Partner.

For further information please contact:

Inga Töller, Marketing & Sales Manager
Model Engineering Solutions GmbH (MES)
Mauerstraße 79, 10117 Berlin (Germany)

Tel: +49 30 2091 6463 14
Fax: +49 30 2091 6463 33
Email: inga.toeller@model-engineers.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Everything in View with the Assessment Analyzer here

News-ID: 317694 • Views: 1139

More Releases from Model Engineering Solutions GmbH

New guideline documents available in MXAM DRIVE
MXAM DRIVE v.3.8 with extended content addressing Embedded Coder® users and ASCET® users. April 06, 2016, Berlin: Model Engineering Solutions (MES), software specialists from Berlin, enhanced their software tool MES Model Examiner DRIVE® (MXAM DRIVE) with two new guideline documents. Adherence to modeling guidelines is the best practice for improving the quality of software models. However, with over 500 guidelines published by automotive consortia, plus a huge number of company- and
MXAM DRIVE – The first choice for guideline checking
MXAM DRIVE is the platform-independent tool for guideline checks in model-based software development. April 06, 2016, Berlin: The guideline compliance checking tool MES Model Examiner® (MXAM) from Model Engineering Solutions (MES) has undergone a remarkable product development over recent years. The fruitful feedback of customers has supported the continuous growth of MXAM significantly. From MXAM to MXAM DRIVE Requests for diverse additional functionalities led to the introduction of a new tool platform
HIGH-QUALITY SOFTWARE ON LAND AND IN THE AIR
MES launches two new projects: Model-based software development in avionics and software development methodology for multicore processors. Berlin (Germany), October 27, 2015: Model Engineering Solutions (MES) starts two new research projects this fall. The objective of MCAS, funded by the Federal Ministry of Economic Affairs and Energy, is to develop a software model verification procedure to safeguard the current safety standard for avionics. The second research project, ASSUME, concerns itself with
MES Joins SafeTRANS Network
Berlin (Germany), April 28, 2015: Model Engineering Solutions (MES), specialists in embedded software from Berlin, has become a member of the international competence network SafeTRANS. SafeTRANS is an association of prestigious enterprises and scientific institutions that ensures exchange between research and industry in embedded systems for transportation. The goal of the network is to increase the safety of transportation with the help of cutting-edge technology and optimized processes. Focus of the

All 5 Releases


More Releases for MES

Managed Equipment Service (MES) Market Value Projected to Expand by 2027 | MES G …
This brilliant Managed Equipment Service (MES) market report centers around the significant mechanical development and the changing patterns embraced by various associations over a particular time period. The report on worldwide market likewise features superior projections that one can think about essentially for a more steady and more grounded business viewpoint. Not just this, moreover this report figures the valuation and size of the worldwide market during the period from
Manufacturing Execution System (MES) Market - The Popularity of Cloud-Based MES …
According to a new market report published by Transparency Market Research The global manufacturing execution system (MES) market is expected to reach a value of US$ 18,067.9 Mn by 2025 on account of the rising demand for improving productivity and executing complex production processes efficiently. The market is projected to expand at a CAGR of 11.2% during the forecast period from 2017 to 2025. The growth is attributed to growing
Manufacturing Execution System (MES) Market - The Popularity of Cloud-Based MES …
According to a new market report published by Transparency Market Research The global manufacturing execution system (MES) market is expected to reach a value of US$ 18,067.9 Mn by 2025 on account of the rising demand for improving productivity and executing complex production processes efficiently. The market is projected to expand at a CAGR of 11.2% during the forecast period from 2017 to 2025. The growth is attributed to growing
MES Joins SafeTRANS Network
Berlin (Germany), April 28, 2015: Model Engineering Solutions (MES), specialists in embedded software from Berlin, has become a member of the international competence network SafeTRANS. SafeTRANS is an association of prestigious enterprises and scientific institutions that ensures exchange between research and industry in embedded systems for transportation. The goal of the network is to increase the safety of transportation with the help of cutting-edge technology and optimized processes. Focus of the
MES: Expansion in Asia
Berlin, November 24, 2014: Model Engineering Solutions (MES), the Berlin-based specialist for model-based software development, has significantly expanded its business in Asia. In recent years, MES has built up a network of local partners in Japan, Korea, China, and India in order to benefit from the growing market and increasing interest in model-based development and ISO 26262 in Asia. Asia: Driving force in the automotive industry The automotive industry continues
MES & Process Minds Europe 2013
Automation & Control - Improving Operational Excellence in Process Industry Manufacturing operations by implementing Comprehensive & Compliant Data and Information Platform & Integrated IT systems| 30th September– 1th October 2013, Maritime ProArte Hotel Berlin, Germany http://pharma-mes2013.we-conect.com/ "Very good and informative conference to share knowledge and to benchmark your company in your industry sector." Kathrin Wilhelm, Fresenius Kabi D-GmbH By popular demand, we.CONECT is bringing board-level attendees from manufacturing execution systems management from all over