Summer Webinars: The MES Webinar Series Continues
The topics covered in upcoming sessions are as follows:
The challenge of ISO 26262 for complex models
Larger and more complex software models present a particular challenge if you need to ensure that the ISO 26262 standard’s numerous requirements are implemented productively. In this webinar we present strategies and concepts for the efficient implementation of the standard even in cases of high model complexity.
The speaker is Dr. Heiko Dörr, COO at MES.
• Tuesday September 2, 2014, from 4-5 p.m. CEST
• Wednesday September 3, 2014, from 9-10 a.m. CEST
MES M-XRAY: Measuring and evaluating the complexity of software models
Software model complexity has long been a subject of discussion in the industry. But how can you measure complexity reliably and what is the best way to do so? This webinar is based on MES M-XRAY, our tool for measuring model complexity.
The speaker is Dr. Hartmut Pohlheim, CTO at MES.
• Tuesday September 23, 2013, from 4-5 p.m. CEST
• Wednesday September 24, from 10-11 a.m. CEST
ISO 26262 in 10 steps: The most efficient path to ISO compliance
The introduction of ISO standards necessitates, firstly, the selection of suitable methods and measures, and secondly, a decision regarding the order in which your existing development process should be extended. In this webinar we present optimal methods, measures, and tools for model-based development. A central part of the webinar is a cost/benefit analysis based on best practices, which aims to facilitate logical prioritization within the process.
The speaker is Dr. Elke Salecker, Senior Software Consultant at MES.
• Tuesday October 14, 2014, from 4-5 p.m. CEST
• Wednesday October 15, 2014, from 10-11 a.m. CEST
Register to take part in a webinar on the MES website: www.model-engineers.com/en/webinars.html.
Model Engineering Solutions GmbH (MES) specializes in integrated quality assurance of embedded automotive software. MES Quality Commander® (MQC) is a dynamic management and control tool for use in software development projects, delivering key decision-making data throughout the product development lifecycle. MES Model Examiner® (MXAM) is the first choice for checking modeling guideline consistency of Simulink®, TargetLink®, and ASCET models. MES Test Manager® perfectly implements requirements-based testing in model-based development and is the optimum solution for unit testing. MES provides tailored consulting and services to companies seeking to introduce or enhance their model-based development processes, to introduce new technologies such as AUTOSAR, or to fulfill standards such as ISO 26262. MES clients include major OEMs and suppliers to the automotive industry worldwide. MES is a TargetLink® Strategic Partner of dSPACE GmbH and a MathWorks and ETAS Product Partner.
Director Marketing & Sales
Model Engineering Solutions GmbH (MES)
Mauerstrasse 79, 10117 Berlin (Germany)
Tel: +49 30 2091 6463 14
Fax: +49 30 2091 6463 33
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Summer Webinars: The MES Webinar Series Continues here
News-ID: 293678 • Views: 16597
More Releases from Model Engineering Solutions GmbH
New guideline documents available in MXAM DRIVE
MXAM DRIVE v.3.8 with extended content addressing Embedded Coder® users and ASCET® users. April 06, 2016, Berlin: Model Engineering Solutions (MES), software specialists from Berlin, enhanced their software tool MES Model Examiner DRIVE® (MXAM DRIVE) with two new guideline documents. Adherence to modeling guidelines is the best practice for improving the quality of software models. However, with over 500 guidelines published by automotive consortia, plus a huge number of company- and
MXAM DRIVE – The first choice for guideline checking
MXAM DRIVE is the platform-independent tool for guideline checks in model-based software development. April 06, 2016, Berlin: The guideline compliance checking tool MES Model Examiner® (MXAM) from Model Engineering Solutions (MES) has undergone a remarkable product development over recent years. The fruitful feedback of customers has supported the continuous growth of MXAM significantly. From MXAM to MXAM DRIVE Requests for diverse additional functionalities led to the introduction of a new tool platform
HIGH-QUALITY SOFTWARE ON LAND AND IN THE AIR
MES launches two new projects: Model-based software development in avionics and software development methodology for multicore processors. Berlin (Germany), October 27, 2015: Model Engineering Solutions (MES) starts two new research projects this fall. The objective of MCAS, funded by the Federal Ministry of Economic Affairs and Energy, is to develop a software model verification procedure to safeguard the current safety standard for avionics. The second research project, ASSUME, concerns itself with
Everything in View with the Assessment Analyzer
Berlin, 07 October 2015: Model Engineering Solutions GmbH (MES) has added an Assessment Analyzer to its proven MTest testing tool. This interactive, graphical addition to the MTest Assessment Framework makes it easy to visualize selected test sequences and inspect them thoroughly – making systematic and fully-automated model and software testing a considerably easier task. Assessment Analyzer extends established MTest Assessment Framework MES developed the Assessment Framework as an integral part of MTest
More Releases for MES
MES Joins SafeTRANS Network
Berlin (Germany), April 28, 2015: Model Engineering Solutions (MES), specialists in embedded software from Berlin, has become a member of the international competence network SafeTRANS. SafeTRANS is an association of prestigious enterprises and scientific institutions that ensures exchange between research and industry in embedded systems for transportation. The goal of the network is to increase the safety of transportation with the help of cutting-edge technology and optimized processes. Focus of the
MES SUPPORTS 13TH AUTOMOTIVE SOFTWARE ENGINEERING WORKSHOP
Tackling the Challenges of Automotive Software Engineering in Transition to Smart Mobility Berlin (Germany), March 23, 2015: Model Engineering Solutions GmbH (MES) and the Brandenburg University of Technology (BTU) will be organizing this year’s Automotive Software Engineering Workshop of the German Informatics Society (GI), which will be held at the BTU in Cottbus on September 29, 2015. The call for papers has already begun and contributions can be submitted until April
MES: Expansion in Asia
Berlin, November 24, 2014: Model Engineering Solutions (MES), the Berlin-based specialist for model-based software development, has significantly expanded its business in Asia. In recent years, MES has built up a network of local partners in Japan, Korea, China, and India in order to benefit from the growing market and increasing interest in model-based development and ISO 26262 in Asia. Asia: Driving force in the automotive industry The automotive industry continues
SAP MES Day: Producing upon customer request
Liestal (CH), May 21, 2014 – Trebing + Himstedt, SAP MES expert for consulting, implementation and licensing of SAP solutions in the production environment and SAP (Schweiz) AG would like to invite you to the SAP MES Day for discrete manufacturing on June 24, 2014 in Regensdorf (ZH), Switzerland. Participation is free. On this day, the SAP MES experts Trebing + Himstedt and SAP will provide information based on numerous
MES & Process Minds Europe 2013
Automation & Control - Improving Operational Excellence in Process Industry Manufacturing operations by implementing Comprehensive & Compliant Data and Information Platform & Integrated IT systems| 30th September– 1th October 2013, Maritime ProArte Hotel Berlin, Germany http://pharma-mes2013.we-conect.com/ "Very good and informative conference to share knowledge and to benchmark your company in your industry sector." Kathrin Wilhelm, Fresenius Kabi D-GmbH By popular demand, we.CONECT is bringing board-level attendees from manufacturing execution systems management from all over
Aleees To Deploy Cmnagivo Mes
TaoYuan/Taiwan, Oporto/Portugal, 5 July, 2011 – Critical Manufacturing, an enterprise which creates leading edge software solutions for the high-tech manufacturing industries of solar, electronics and semiconductors, announced today that Advanced Lithium Electrochemistry Co. selected cmNavigo, the innovative MES solution from Critical Manufacturing. Aleees provides exceptionally safe and high quality Lithium iron phosphate batteries. With its breakthrough LFP-NCO Cathode Material (Lithium Iron Phosphate – Nano Co-crystalline Olivine), globally patented in