openPR Logo
Press release

ESCHA at sps ipc drives 2012

11-07-2012 11:51 AM CET | Industry, Real Estate & Construction

Press release from: ESCHA Bauelemente GmbH

The new ESCHA double-valve-connectors (left with M12x1 connection, right with connection cable).

The new ESCHA double-valve-connectors (left with M12x1 connection, right with connection cable).

Halver, 29 October – The connectivity- and housing specialist ESCHA in Halver again presents many new products for various applications at the ‘sps ipc drives’ in Nuremberg from 27 to 29 November 2012. The Highlights on Stand 320 in Hall 6 include new product lines for the Industrial-Ethernet-Protocol sercos and EtherCAT as well as double-valve-connectors and valve connectors with straight cable outlet of the latest generation.

Sercos and EtherCAT

Fieldbus connectors require a reliable 360° shielding to enable a safe and industrial-suited data transmission. ESCHA relies on its own development of the patented 2SSK-technology. In case of this two-shell shielding concept, connecting the shield is not effected through a shield connection crimped on the cable, but through a reliable crimping with the shield housing. The concluding two-component overmolding guarantees the round connector protection classes IP67, IP68 and IP69K.

In Nuremberg, ESCHA presents sercos-compatible connection- and junction cables with a drag-chain suited cable quality (PUR) of category Cat5e in M12x1 housing style (4-pole, male, straight/right-angle) and RJ45 (4-pole/8pole, male, multiport- capable). ESCHA products guarantee optimal network utilization through high signal reserves.

In addition to connection- and junction cables in M12x1 housing styles (4-pole, male/female, straight/right-angle) and RJ45 (4-pole/8-pole, male, multiport-capable), M8x1 connectivity components (4-pole, male/female, straight/right-angle) for EtherCAT are available as well. These can be optionally equipped with a drag-chain suited PUR- cable or a PVC-cable for moving applications. Both cable qualities meet the Cat5 category requirements.



Valve connectors

In the area of valve connectors, ESCHA successfully launched a completely redesigned product generation last year. This will be extended by double-valve-connectors, an adapter between a valve connector and M12x1 round connector and valve connectors with straight cable outlet at the sps ipc drvies.

The double-valve connectors for a voltage range up to 24V AC/DC in A housing style are available with a connection cable or with M12x1-connection. All versions can be equipped with either a UL-listed PUR- or a UL-listed PVC-cable quality. The products with a straight cable outlet are available in A housing style as well and can be optionally equipped with a thread for protective tubing. They are particularly suitable for applications with narrow space e.g. wind-power farms.

Due to their basic new design, all types of the valve-connector range by ESCHA require less installation space than before. They are dust- and waterproof according to protection class IP67 and meet the IP69K-requirements against water at high pressure- and steam-jet cleaning. The valve connectors guarantee a very well-visible LED-display through their translucent grey-black overmolding in all mounting positions.

Standard, Special, Tailor-made

In addition to the aforementioned trade-show premiers, ESCHA will also exhibits its comprehensive standard-product programme as well as lots of interesting modifications- and development projects at the sps ipc drives. Visitors can get information on all these topics on Stand 320 in Hall 6.

ESCHA - About us

ESCHA is a leading supplier in the fields of connectivity and housing technology. The family-controlled company has been developing and manufacturing in Halver/Germany for more than 25 years. As an innovation leader, ESCHA realizes product novelties taking dynamics to the market for automation components. Based on its standard products, the company designs custom-made connectivity and individual special solutions. With more than 500 employees and highly in-depth development and production, ESCHA is extending its product portfolio constantly and independently.

ESCHA Bauelemente GmbH
Elberfelder Straße 32
58553 Halver
Germany
www.escha.de/en

Dipl.-Medienökonom Florian Schnell
Public Relations Management
Tel. +49 2353 708-156
E-Mail: f.schnell@escha.de
www.escha.de/en/press.htm

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release ESCHA at sps ipc drives 2012 here

News-ID: 241535 • Views: 1752

More Releases from ESCHA Bauelemente GmbH

(Un)locking made easy
Halver, 30 May 2016 – For a quick and easy un- and locking of overmolded RJ45-connectors, the connectivity specialist ESCHA is promptly providing the new ESCHA multi-clip. This is easily plugged onto the overmolded RJ45-connector body and is immediately ready-to-use. With ESCHA multi-clip, RJ45-connectors deeply plugged into the port, with their unlocking lugs being hard- or even impossible to reach for by finger, can be unlocked. Besides, RJ45-connectors already plugged cannot
Energy Management System certified successfully
Halver, 26 October 2015 – ESCHA Bauelemente GmbH Energy Management System was successfully certified according to DIN EN ISO 50001:2011 in the middle of October 2015. The audit was carried out by DNV GL-Business Assurance within three days. The certified Energy Management System enables the connector- and housing specialist to determine potentials and continuously enhance energy efficiency of the company. “Introducing an Energy Management System is basically optional“, says Achim
Premiers at SPS IPC Drives 2015
Halver, 22 September 2015 – The connector- and housing specialist ESCHA is presenting new junction components for its product line called ‘M12x1 Power’ at this year’s SPS IPC Drives in Nuremberg. The so called ‘H-junctions‘, ‘h-junctions‘, and, ‘T-junctions‘ also facilitate a serial wiring structure at field level with power applications up to 630V. In addition, ESCHA will be showing price-optimized RJ45 patch cords in industrial quality for switch-cabinet wiring. M12x1 power-junctions The
New Cable Stripping Tools
Halver, 18 August 2015 – As of now, new cable stripping tools supplement the original accessories of the connector- and housing specialist ESCHA. Outer jackets of cables with various lengths and diameters can now be removed easily and quickly with the so called ‘Cable Strip Tool‘ and the ‘Cable Cut Tool‘. Cable Strip Tool The Cable Strip Tool works like a pair of pliers. Thereby, the cable is simply laid between the

All 5 Releases


More Releases for M12x1

Product Premiers at SPS IPC Drives
Halver, 21 September 2016 – At this year’s SPS IPC Drives in Nuremberg from 22 to 24 November 2016, the connectivity specialist ESCHA is again presenting lots of novelties including a new variant of its successful product portfolio ‘Automation Line‘. The ‘Automation Line easystrip‘ is equipped with a special cable which can be particularly easily stripped. In addition, and for the first time, ESCHA is showing new M8x1- and M12x1-Y-junctions
Premiers at SPS IPC Drives 2015
Halver, 22 September 2015 – The connector- and housing specialist ESCHA is presenting new junction components for its product line called ‘M12x1 Power’ at this year’s SPS IPC Drives in Nuremberg. The so called ‘H-junctions‘, ‘h-junctions‘, and, ‘T-junctions‘ also facilitate a serial wiring structure at field level with power applications up to 630V. In addition, ESCHA will be showing price-optimized RJ45 patch cords in industrial quality for switch-cabinet wiring. M12x1 power-junctions The
Connectivity for power-applications
Halver, 18 June 2015 – At the SPS IPC Drives 2014 in Nuremberg, the connector- and housing specialist ESCHA presented connectivity for power applications. The 4-pole M12x1 connectors are predestinated for power transmission and are available as of now. With the newly developed products identified as ‘Power S‘ or ‘Power T‘, ESCHA offers a consistent- and a qualitatively high-grade M12x1-connectivity portfolio for sensors-, data-, and power supply. The trend moves towards
Accurate, compact and exactly repeatable
Halver, 15 April 2013 – Connectors will only achieve the tightness guaranteed by the manufacturer if they are tightened with the respectively given torque. A relevant torque wrench as well as a high repeatability is indispensable for accurate and effective operations. The connector- and housing specialist ESCHA offers a Torque Wrench-Set that provides for a professional installation of its M8x1- and M12x1-round connectors. ESCHA Torque Wrench-Set comes in a handy roll-up
New Industrial Ethernet-Connectors from ESCHA
Halver, 26 March 2012 – The Halver/Germany based Connectivity- and Housing manufacturer ESCHA has extended its connectivity line for Industrial-Ethernet-Applications by several products that guarantee a fast and safe data transmission up to 10 Gbit/s. The new M12x1 round connectors with X-Coding as well as the new RJ45-Connectors are respectively available as field wireable- or overmolded variants. Moreover, the connectivity specialist is also introducing a device connection and
Cooperation between ESCHA and the METZ CONNECT Group
Halver/Blumberg, 15 September 2010 - The German connectivity specialist ESCHA and METZ CONNECT have entered into a worldwide-, long-term partnership for the development and production of industrial Ethernet-Connectors. The cooperation aims at providing continuous transmission solutions between IT-wiring, the switching cabinet, and the field connections. ESCHA is contributing with its development competence in the field of M12x1 round connectors implementing its highly in-depth development- and production capabilities as well as its