openPR Logo
Press release

Connectivity for power-applications

08-18-2015 12:15 PM CET | Industry, Real Estate & Construction

Press release from: ESCHA Bauelemente GmbH

Next to flanges (photo) ESCHA offers also overmoulded connectors for M12x1 power-applications.

Next to flanges (photo) ESCHA offers also overmoulded connectors for M12x1 power-applications.

Halver, 18 June 2015 – At the SPS IPC Drives 2014 in Nuremberg, the connector- and housing specialist ESCHA presented connectivity for power applications. The 4-pole M12x1 connectors are predestinated for power transmission and are available as of now. With the newly developed products identified as ‘Power S‘ or ‘Power T‘, ESCHA offers a consistent- and a qualitatively high-grade M12x1-connectivity portfolio for sensors-, data-, and power supply.

The trend moves towards compact power supply via M12x1-interface

As electronic devices are becoming increasingly more compact, demand for an adequate compact power supply has recently been rising continuously. Numerous manufacturers tend to resort to the industry-proven M12x1-interface. ESCHA has new connection- and junction cables as well as flanges on offer providing for a reliable power transmission via the standardized M12x1-interface (according to IEC 61076-2-111).

All components have been basically redesigned and meet the IP67, IP68 and IP69 high requirements and thereby fulfilling UL 2237. Due to a connection cross-sectional area up to 2.5mm², the products allow for a large extension of power distribution; a further advantage – especially in case of direct-current distribution – is the slight voltage drop in contrast to the small cross-sectional area.

M12x1-round connector with S- or T-coding types

On the market, two various coding types have prevailed in the field of M12x1-power transmission:

- Connectors with S-coding type are particularly adapted to alternating-current applications (AC-applications of up to 12A / 630V). Hereunder and among others, compact- and decentral components e.g. motors or frequency convertors fall within this category.

- For direct-current applications (DC-applications of up to 12A / 63V), connectors with T-coding type are applied. Thus, e.g. field-bus components, power supplies or small motors can be supplied with power.

With ‘Power S’ and ‘Power T’, ESCHA has the right flange as well as the connector in straight- and angled versions, female or male for all applications.

Variable junction solutions for field power-distribution

In future, connection- and junction cables – equipped with further components – are to be extended to a comprehensive product line providing for a structured field power-distribution. In the long run, ESCHA is pursuing a wiring system including solutions for device interfaces, switch-cabinet junctions, and power distribution. Moreover, the proposed standard for M12x1-round connectors for power transmission includes additional coding types and other polarities which will also be in focus of further development.

ESCHA - About us

The ESCHA Group is a leading supplier in the fields of connectivity and housing technology. For more than 30 years, the family-controlled company has been developing and manufacturing innovative product novelties taking dynamics to the market for automation components. Based on its standard products, the company designs custom-made connectivity and individual special solutions. With more than 400 employees and highly in-depth development and production, ESCHA is extending its product portfolio constantly and independently. ESCHA guarantees high availability and consistent quality of its products worldwide through production facilities in Germany, Czech Republic and China as well as licensed production in USA and Mexico.

ESCHA Bauelemente GmbH
Elberfelder Straße 32
58553 Halver
Germany
www.escha.net/MEN/en/default.htm

Dipl.-Medienökonom Florian Schnell
Public Relations Management
Tel. +49 2353 708-156
E-Mail: f.schnell@escha.net
www.escha.net/MEN/en/Press_Room.htm

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Connectivity for power-applications here

News-ID: 311734 • Views: 5960

More Releases from ESCHA Bauelemente GmbH

(Un)locking made easy
Halver, 30 May 2016 – For a quick and easy un- and locking of overmolded RJ45-connectors, the connectivity specialist ESCHA is promptly providing the new ESCHA multi-clip. This is easily plugged onto the overmolded RJ45-connector body and is immediately ready-to-use. With ESCHA multi-clip, RJ45-connectors deeply plugged into the port, with their unlocking lugs being hard- or even impossible to reach for by finger, can be unlocked. Besides, RJ45-connectors already plugged cannot
Energy Management System certified successfully
Halver, 26 October 2015 – ESCHA Bauelemente GmbH Energy Management System was successfully certified according to DIN EN ISO 50001:2011 in the middle of October 2015. The audit was carried out by DNV GL-Business Assurance within three days. The certified Energy Management System enables the connector- and housing specialist to determine potentials and continuously enhance energy efficiency of the company. “Introducing an Energy Management System is basically optional“, says Achim
Premiers at SPS IPC Drives 2015
Halver, 22 September 2015 – The connector- and housing specialist ESCHA is presenting new junction components for its product line called ‘M12x1 Power’ at this year’s SPS IPC Drives in Nuremberg. The so called ‘H-junctions‘, ‘h-junctions‘, and, ‘T-junctions‘ also facilitate a serial wiring structure at field level with power applications up to 630V. In addition, ESCHA will be showing price-optimized RJ45 patch cords in industrial quality for switch-cabinet wiring. M12x1 power-junctions The
New Cable Stripping Tools
Halver, 18 August 2015 – As of now, new cable stripping tools supplement the original accessories of the connector- and housing specialist ESCHA. Outer jackets of cables with various lengths and diameters can now be removed easily and quickly with the so called ‘Cable Strip Tool‘ and the ‘Cable Cut Tool‘. Cable Strip Tool The Cable Strip Tool works like a pair of pliers. Thereby, the cable is simply laid between the

All 5 Releases


More Releases for M12x1

Product Premiers at SPS IPC Drives
Halver, 21 September 2016 – At this year’s SPS IPC Drives in Nuremberg from 22 to 24 November 2016, the connectivity specialist ESCHA is again presenting lots of novelties including a new variant of its successful product portfolio ‘Automation Line‘. The ‘Automation Line easystrip‘ is equipped with a special cable which can be particularly easily stripped. In addition, and for the first time, ESCHA is showing new M8x1- and M12x1-Y-junctions
Premiers at SPS IPC Drives 2015
Halver, 22 September 2015 – The connector- and housing specialist ESCHA is presenting new junction components for its product line called ‘M12x1 Power’ at this year’s SPS IPC Drives in Nuremberg. The so called ‘H-junctions‘, ‘h-junctions‘, and, ‘T-junctions‘ also facilitate a serial wiring structure at field level with power applications up to 630V. In addition, ESCHA will be showing price-optimized RJ45 patch cords in industrial quality for switch-cabinet wiring. M12x1 power-junctions The
Accurate, compact and exactly repeatable
Halver, 15 April 2013 – Connectors will only achieve the tightness guaranteed by the manufacturer if they are tightened with the respectively given torque. A relevant torque wrench as well as a high repeatability is indispensable for accurate and effective operations. The connector- and housing specialist ESCHA offers a Torque Wrench-Set that provides for a professional installation of its M8x1- and M12x1-round connectors. ESCHA Torque Wrench-Set comes in a handy roll-up
New Industrial Ethernet-Connectors from ESCHA
Halver, 26 March 2012 – The Halver/Germany based Connectivity- and Housing manufacturer ESCHA has extended its connectivity line for Industrial-Ethernet-Applications by several products that guarantee a fast and safe data transmission up to 10 Gbit/s. The new M12x1 round connectors with X-Coding as well as the new RJ45-Connectors are respectively available as field wireable- or overmolded variants. Moreover, the connectivity specialist is also introducing a device connection and
Cooperation between ESCHA and the METZ CONNECT Group
Halver/Blumberg, 15 September 2010 - The German connectivity specialist ESCHA and METZ CONNECT have entered into a worldwide-, long-term partnership for the development and production of industrial Ethernet-Connectors. The cooperation aims at providing continuous transmission solutions between IT-wiring, the switching cabinet, and the field connections. ESCHA is contributing with its development competence in the field of M12x1 round connectors implementing its highly in-depth development- and production capabilities as well as its
Pressure Sensor / Transducer with Deutsch and M12x1 Eurofast Now Available on AS …
American Sensor Technologies, Inc. (AST) has released its AST4000 pressure sensor, transducer and transmitter series to the OEM market with four-pin DT04 Deutsch and M12x1 Eurofast electrical connection options. Popular in on-road, off-road, hydraulic and agricultural applications; the DT04 Deutsch connector is a rugged connector that is similar to the Packard Metripack 150 series. The M12x1 Eurofast connection has seen growth in factory automation and OEM applications.