Boundary Scan Module extends structural Test Coverage to DDR3 Memory Interfaces

Jena; Las Vegas/NV – At the 2010 IPC APEX Expo, GOEPEL electronic, a world-class vendor of JTAG/Boundary Scan solutions compliant with IEEE Std.1149.x, officially introduces the CION Module™/SO-DIMM204-3 as a new member of the company’s CION product family.
This new low-cost, digital I/O module is controlled through an IEEE 1149.1 TAP (Test Access Port) and provides resources for connectivity testing of all signal and voltage supply pins on DDR3-SDRAM SO-DIMM204 sockets compliant with JEDEC standards JESD21-C and JESD79-3C.

”An increasing number of our customers use DIMM sockets for DDR memory modules on their products. With the CION Module™/SO-DIMM204-3 module we offer an effective solution for structural tests of such interfaces”, says Heiko Ehrenberg, General Manager US Operations for GOEPEL electronic. “We’re continuously expanding our CION product line with modules for the test of digital, analogue and mixed-signal interfaces in order to assist our customers in achieving the highest possible test coverage with their JTAG/Boundary Scan tools.”

The CION Module™/SO-DIMM204-3 is the 14th member of the CION module family. It is mechanically compliant with JEDEC Std. MO268 and can be plugged directly into the socket to be tested, whereby the voltage configuration for the interface is done automatically. Several CION modules of the same or different types can be cascaded in a daisy-chain configuration, with the TAPs being externally voltage programmable for flexibility.
The module features the CION™ Boundary Scan ASIC for the structural test of all SO-DIMM204 signal and power supply pins. All test channels can be switched input/output/tristate.

This new hardware module is fully supported by all JTAG/Boundary Scan controllers of the SCANBOOSTER™ and SCANFLEX® product families and by the integrated JTAG/Boundary Scan software platform SYSTEM CASCON™. For more than 17 years now, SYSTEM CASCON™ has been the most innovative Integrated JTAG/Boundary Scan Development Environment, featuring currently more than 40 fully integrated tools. Users are able to easily include the CION Module™/SO-DIMM204-3 in CASCON projects, with fully automated test pattern generation. Any defects detected on the UUT can be visualized graphically at pin and net level in layout and schematic displays. Pin Fault Diagnostics processors can generate diagnostic messages for board and system level defects, and ScanAssist debugger tools can be used for failure analysis and for interactive debug sessions.

GOEPEL electronic is a worldwide leading vendor of advanced JTAG/Boundary Scan solutions and a technology innovator of IP based instrumentation. With more than 100 product launches the company grew into the biggest innovator in the market within the last five years. A network of branch offices, distributors and service partners ensures the global availability of products and services and provides support for the more than 7,000 system installations. Founded in 1991 and headquartered in Jena, Germany, GOEPEL electronic currently employs about 160 employees and generated revenue of 17.9 Million Euro in 2009. GOEPEL electronic has continuously been ISO 9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the company and its products can be found on the internet at www.goepel.com.

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK

Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk

Stefan Meissner
press@goepel.com

This release was published on openPR.