openPR Logo
Press release

Parallel Inline AOI for THT Components and THT Solder Joints in one System

11-29-2012 10:56 PM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

OptiCon THT-Line

OptiCon THT-Line

GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport.

This gain in effectiveness for users is enabled by the OptiCon THT-Line system’s integration opportunity before the wave soldering oven. A camera system with an extremely high focal range (up to 80 mm) inspects the PCB’s component side. Hence, detected faults, such as wrong polarity, can be easily rectified before the soldering process.

For solder joint inspection a scanner system is integrated into the AOI system’s lower transport area. It checks the PCBs during the return transport. Additional configuration variants for the inspection of the component and solder joint sides are of course possible.

The system software OptiCon PILOT version 5.3 is integral part of the OptiCon THT-Line. It supports the THT assembly inspection by particularly convenient opportunities in generating test programs by means of “easyELKO” and “easyOCR”. These functions allow for polarity check of electrolytic capacitors and label reading without prior learning process. With regard to already known opportunities for OCR, this means a revolutionary step in utilizing OCR for quality control of electronic assemblies. In addition, the recently released touchscreen operation with optimized user interface guarantees a convenient and efficient working method with the system.

GOEPEL electronic is a worldwide leading vendor of professional JTAG/Boundary Scan solutions and technology innovator of IP based instrumentation. With more than 100 product launches the company became the biggest innovator in the market within the last five years. A network of branch offices, distributors and service partners ensures the global availability of the products as well as the support of the more than 7,000 system installations.
Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 200 employees. GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries.
Further information about the company and its products can be found on the internet at

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge

Phone +44-1223-858298
Fax +44-1223-257800

Stefan Meissner

This release was published on openPR.

Permanent link to this press release:

Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Parallel Inline AOI for THT Components and THT Solder Joints in one System here

News-ID: 244856 • Views:

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Error Rate Tests
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
World’s first Boundary Scan Controller with Wireless LAN Interface
World’s first Boundary Scan Controller with Wireless LAN Interface
GOEPEL electronic announces the introduction of SFX/WSL1149-(x), the world’s first controllers for Wireless LAN (WLAN) as an addition to the company’s Boundary Scan hardware platform SCANFLEX®. The new Boundary Scan controller series provides a Triple Stream/Dual Band WLAN interface for theoretical transmission speed up to 450 Mbps, enabling wireless utilisation of the newest Embedded System Access (ESA) technologies for testing, programming and debugging of complex chips, boards, and entire systems. “Our goal

All 5 Releases

More Releases for THT

THT Universal Diodes Market Research Report, Analysis from Perspective of Segmen …
Los Angeles-United State: QY Research has recently published a research report titled, "Global THT Universal Diodes Market Insight, Forecast To 2028" assessing various factors impacting its trajectory. The global THT Universal Diodes market report offers a high-quality, accurate, and comprehensive research study to equip players with valuable insights for making strategic business choices. The research analysts have provided deep segmental analysis of the global THT Universal Diodes market on the
Lightweight Concrete Wall Panel Market Analysis by Emerging Growth Factors and R …
LOS ANGELES, United States: QY Research offers an encyclopedic study of the global Lightweight Concrete Wall Panel market with holistic insights into vital factors and aspects that impact future market growth. The global Lightweight Concrete Wall Panel market has been analyzed for the forecast period 2022-2028 and historical period 2017-2021. In order to help players to gain comprehensive understanding of the global Lightweight Concrete Wall Panel market and its critical
Isothermal Calorimeter Market Company Insights & SWOT Analysis by 2027 | Setaram …
This detailed assessment Isothermal Calorimeter market report highlights data about various aspects, which includes growth factors and restraints. Crucial information about market scenario provided in this market report greatly helps key stakeholder in making right decision before making an investment in the market. This report further provides an overview on well-known industries, their market contribution, successful market strategies and latest advancements in present contexts. It also covers market analysis
Bacteriocins and Protective Cultures Global Market 2018: Key Players – CHR Han …
Bacteriocins and Protective Cultures Industry Description Wiseguyreports.Com Adds “Bacteriocins and Protective Cultures -Market Demand, Growth, Opportunities and Analysis Of Top Key Player Forecast To 2023” To Its Research Database The objectives of this study are to define, segment, and project the size of the Bacteriocins and Protective Cultures market based on company, product type, application and key regions. This report studies the global market size of Bacteriocins and Protective Cultures in key regions like
Medium Voltage MOSFET Market Report 2018: Segmentation by Type (SMT Type, THT Ty …
Global Medium Voltage MOSFET market research report provides company profile for Renesas Electronics, Fuji Electric, NXP Semiconductors, Texas Instruments, Diodes Incorporated, Microsemi, Infineon Technologies, Vishay, ON Semiconductor, Toshiba, STMicroelectronics and Others. This market study includes data about consumer perspective, comprehensive analysis, statistics, market share, company performances (Stocks), historical analysis 2012 to 2017, market forecast 2018 to 2025 in terms of volume, revenue, YOY growth rate, and CAGR for the year
Global Heat Exchanger Market - THT, Xylem, Alfa Laval, Thermowave, Hitachi Zosen
Global Heat Exchanger Market 2017, presents a professional and in-depth study on the current state of the Heat Exchanger market globally, providing basic overview of Heat Exchanger market including definitions, classifications, applications and industry chain structure, Heat Exchanger Market report provides development policies and plans are discussed as well as manufacturing processes and cost structures. Download Free Sample Report @ Heat Exchanger market research report studies Heat Exchanger in