openPR Logo
Press release

New Boundary Scan Relays Card for Integration into ICT Adapter Systems

12-02-2010 02:20 PM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

GOEPEL electronic introduces a special relay card for integration into fixture adapter systems for In-Circuit Testers (ICT). The card is named CION ICT Adapter, and was specifically developed to meet customer requirements for Boundary Scan integration into ICT adapter systems.

The module enables the switching of 32 test channels from the ICT to GOEPEL electronic’s JTAG/Boundary Scan hardware platform SCANFLEX®. In quiescent state the ATE channels are connected to the ICT probes, and therefore to the UUT via the relay card. The control signals activation effects the switching to Boundary Scan, what results in a connection between UUT and the SCANFLEX® system and the disconnection from the ICT channels.

“The relay card prohibits a collision of both systems’ signals and minimises dynamic effects because of multiple wiring at critical nets”, says Alexander Beck, expert for integration solutions with GOEPEL electronic.

Two LEDs indicate the 5 V supply and the card’s activation state. The module is available in different assembly variants: The “Relay Adapter SL” is equipped with pin contact strips and suits “bird nest” wiring by means of Wire Wrap into adapter systems as well as wiring a 50-pin ribbon cable, as used in DIO plug modules of the SCANFLEX® system.

The “Relay Adapter BU” and “Relay Adapter BU90” are single-sided equipped with a female connector strips. This enables a direct pluggable connection to CION Modules™ such as FXT96 in both horizontal and vertical direction. The user benefits from the extremely simpler use of CION Modules™ for ICT and Functional Test.

The relay cards can be utilised with Plug-In Card (PIC) transceivers that provide single-ended signals at the tester interface. Boundary Scan TAP signals are switched with the relay adapter similar to TIC02/SR modules. Additionally, the switching of 32 PIP signals is possible with one card.

About GOEPEL electronic:
GOEPEL electronic is a worldwide leading vendor of professional JTAG/Boundary Scan solutions and technology innovator of IP based instrumentation. With more than 100 product launches the company became the biggest innovator in the market within the last five years. A network of branch offices, distributors and service partners ensures the global availability of the products as well as the support of the more than 7,000 system installations. Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 160 employees and generated a revenue of 17.9 Million Euro in 2009. GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries.

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK

Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk

Stefan Meissner
press@goepel.com

www.goepel.com
www.goepel.com/twitter
www.goepel.com/youtube
www.goepel.com/linkedin
www.goepel.com/xing

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release New Boundary Scan Relays Card for Integration into ICT Adapter Systems here

News-ID: 154076 • Views:

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Error Rate Tests
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases


More Releases for ICT

Mexico ICT Investment - Government initiatives impacting ICT investment strategi …
Mexico ICT Investment Overview "ICT Investment Trends in Mexico", presents the findings from a survey of 97 Mexican enterprises regarding their Information & Communications Technology (ICT) investment trends. The survey investigates how Mexican enterprises currently allocate their ICT budgets across the core areas of enterprise ICT expenditure: hardware, software, IT services, communications, and consulting. The report illustrates the core technologies that enterprises are investing in, including security products, IoT, cloud computing, and mobility
ICT Investment Trends in Colombia: Business transformations influencing ICT inve …
MarketResearchReports.Biz presents this most up-to-date research on "ICT Investment Trends in Colombia: Business transformations influencing ICT investment strategy". "ICT Investment Trends in Colombia", presents the findings from a survey of 65 Colombian enterprises regarding their Information & Communications Technology (ICT) investment trends. The survey investigates how Colombian enterprises currently allocate their ICT budgets across the core areas of enterprise ICT expenditure: hardware, software, IT services, communications, and consulting. Request Sample Copy of
ICT Investment Trends in Scandinavia: Technology advancements are driving ICT in …
MarketResearchReports.Biz presents this most up-to-date research on "ICT Investment Trends in Scandinavia: Technology advancements are driving ICT investments". "ICT Investment Trends in Scandinavia", presents the findings from a survey of 93 Scandinavian enterprises regarding their Information & Communications Technology (ICT) investment trends. The survey investigates how Scandinavian enterprises currently allocate their ICT budgets across the core areas of enterprise ICT expenditure: hardware, software, IT services, communications, and consulting. Request Sample Copy of
ICT Investment Trends in Malaysia: Infrastructure improvements are driving ICT i …
MarketResearchReports.Biz presents this most up-to-date research on "ICT Investment Trends in Malaysia: Infrastructure improvements are driving ICT investments" ​ICT Investment Trends in Malaysia: Infrastructure improvements are driving ICT investments Get Sample copy of this Report @​ https://www.marketresearchreports.biz/sample/sample/1339294 Summary "ICT Investment Trends in Malaysia", presents the findings from a survey of 48 Malaysian enterprises regarding their Information & Communications Technology (ICT) investment trends. The survey investigates how Malaysian enterprises currently allocate their ICT budgets
ICT Budget and Staffing Trends in Healthcare - Enterprise ICT Investment Plans
"The Report ICT Budget and Staffing Trends in Healthcare - Enterprise ICT Investment Plans provides information on pricing, market analysis, shares, forecast, and company profiles for key industry participants. - MarketResearchReports.biz" About ICT Budget and Staffing Market Product Synopsis This report presents the findings from a survey of 155 healthcare providers regarding their Information and Communications Technology (ICT) budgets and staff allocation. The survey investigates how healthcare providers currently allocate their ICT budgets
ICT Budget and Staffing Trends in Healthcare - Enterprise ICT Investment Plans
Product Synopsis This report presents the findings from a survey of 155 healthcare providers regarding their Information and Communications Technology (ICT) budgets and staff allocation. The survey investigates how healthcare providers currently allocate their ICT budgets across the core areas of ICT spend, namely hardware, software, IT services, communications and consulting. Introduction and Landscape Why was the report written? In order to provide a depth of insight into ICT vendors' and service providers' potential