Press Releases from Hy-Ten Ltd (7 total)
Bamtec Roll-Out Concrete Reinforcement Speeds Completion of Biosciences Incubato …
The Stevenage Biosciences Catalyst has got off to a flying start with the aid of Hy-Ten’s innovative Bamtec concrete reinforcement system. Floor plates on the 9000 square metre campus were constructed more quickly and with less reinforcement material than by conventional methods. Moreover, the new building has lower embedded energy and CO2, less labour was required and rebar fixers were able to complete the task with less strain…
Positional Couplers From Hy-Ten Extends Frictional Welded Coupler Ranges for Con …
Hy-Ten, a pioneer in the UK in the use of friction welded coupler technology for structural reinforcement of concrete, has extended the technique to embrace a new positional coupler range. Fully tested and certified by CARES, the certification authority for reinforcement steels, the couplers are available now.
Director Richard Webster commented, “Friction welded couplers were added to our range just 12 months ago. Engineers and contractors have enthusiastically…
Largest Concrete Frame Building Completed On-Time With Bamtec Prefabricated Stee …
One of the largest concrete frame structures in the UK, the Forth Valley Royal Hospital, was completed on time with the aid of Bamtec, an off-site fabricated steel carpet of floor slab reinforcement. Bamtec is manufactured exclusively by steel reinforcement specialist Hy-Ten in the UK. The use of this reinforcement system also significantly reduced the steel required and in direct consequence the carbon footprint of the project.
The construction…
Prefabricated Roll-Out Steel Reinforcement for Luton Academies Construction
Barnfield South Academy and Barnfield West Academy in Luton have been completed and handed over on time, thanks in part to the use of Hy-Ten’s rollout steel reinforcement system, Bamtec. This has been used for concrete floor construction enabling main contractor Wates Construction to keep on-track despite dreadful weather.
Wates Construction decided to adopt the Bamtec system for concrete floor reinforcement to make time in the schedule. Academies…
Major Structural Elements at Heathrow T2 completed on Time with Bamtec Roll-Out …
Under a four million pound contract, Hy-Ten has supplied rollout reinforcement for the concrete aprons that form the structural core of the new Heathrow T2 building. Main contractors Laing O’Rourke and engineers HETCo turned to Hy-Ten, suppliers of the Bamtec steel reinforcement system to buy time in the delivery of the project.
One of the largest construction projects in the UK, and certainly the most time critical, the new…
Steel Reinforcement Specialist Launches Friction Welded Coupler
A new benchmark in the coupling of re-bars has been set by steel reinforcement specialist Hy-Ten with the UK’s first ever friction welded coupler. Fully approved by independent test laboratories, the HT Welded Coupler offers enhanced structural performance, significant site productivity gains with additional material cost savings.
“In the past, to create a coupled joint, both bars have to be threaded – one end receiving a coupler in the…
Adverse Winter Winter Weather Beaten by Bamtec to Deliver Urban Regeneration Dev …
Anderson Construction, a reinforced concrete frame specialist, has overcome severe winter weather to complete the structural frames on a new urban regeneration project on schedule. In a development for Bellway at Tower Hamlets, they used the Bamtec system for the concrete floor slab reinforcement from Hy-Ten to sustain the programme momentum and complete the framework on-time.
Space One in Christian Street is a multi level development mixing affordable housing and…
Go To Page: 1
