USB high speed arbitrary digital waveform generator Module
The JSB810 USB Pattern Generator module is a high speed arbitrary digital waveform generator. A 16 bit wide digital pattern can be up to 256K words in length and be clocked up to 100Mhz with an on-board clock or user supplied clock. Pattern data is stored local on the module, so USB traffic or speed does not de-grade the signal quality. The outputs are typically used to send stimuli to a user board or chip prototype, or the produce a controlled digital test stream to systems or modules under test. The pattern generator module programming interface is easy to use from Visual Basic, C#, J#, Visual C++ or other applications via a standard windows DLL or a managed Class Library with sample source included. Any programming language that supports calls to Windows DLL or Class Library can also be used. Single unit pricing starts at $195.00 available from stock. On-line order cart and further details can be found at http://www.j-works.comJ-Works, Inc was founded in 1996 developing Industrial Controls Products, in 2002 it introduced it's first USB based Industrial control product. Since then it has continued to expand it's USB product offering and manufacturing. Its full line of USB based Control Product include Relay. DPDT, SPDT, Temperature, I/O, Digital, Counter, WDT, Encoder, USB Switch, Analog, Opto IO, Monitor, DIO, ADC, DAC, USB Measurement and Control Products.
J-Works, Inc
11024 Balboa Blvd #402
Granada Hills, CA 91344
(818) 364-0915 Voice
(818) 364-0912 Fax
sales@j-works.com
www.j-works.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release USB high speed arbitrary digital waveform generator Module here
News-ID: 89254 • Views: …
More Releases from J-Works
USB Watchdog Timer Module WDT with 15Amp Event Relay Module.
J-Works. Inc has start shipping the WDT284 series of USB 2.0 watch dog timer (WDT) modules. Computer hardware devices or programs may lockup. To reduce the risk and possible damage a lockup can cause, there is two possible methods (1) redundancy (2) watchdog timer. Neither method offer 100% protection, but both reduce risk or consequences of failure. Redundancy, a duplication of hardware is very expensive. The WDT284 watchdog…
USB control of 15Amp relay module
JSB284 series of USB 2.0 Controlled module 15Amp Relays. Each relay contact is rated at 15 amp @ 125VAC and 10 amp @ 30VDC Blade type lugs are on the module to provide quick and easy connector to user hardware. Easy to use software interface includes a windows driver and a DLL or Class Library API. Linux support disk is also available. This small form factor module replaces…
USB Internal Mount Watchdog Timer Module WDT Module
J-Works. Inc has start shipping the WDT205 series of USB 2.0 internal mount watch dog timer (WDT) modules .Computer hardware devices or programs may lockup. To reduce the risk and possible damage a lockup can cause, there is two possible methods (1) redundancy (2) watchdog timer. Neither method offer 100% protection, but both reduce risk or consequences of failure. Redundancy, a duplication of hardware is very expensive. The WDT205…
USB 8 Amp SPDT Relays with multi function IO options Model MCSB2101
J-Works has started shipping Model MCSB2101 USB controlled high current relays (8 amp) with optional digital and/or ADC inputs. The module can have 2 optional IO configurations. Each of the configuration options can be any of the following: 8 bit Digital IO, 8 bit Darlington output drivers, 8 bit differential input or output, or 4 channels of ADC input. Digital IO is 3.3v (LVTTL) and is 5V Tolerant.…
More Releases for USB
USB Power Adapters Market Display Significant Growth by 2028(On the basis of USB …
USB Power Adapters
Universal Serial Bus is an industrial standard term that portrays connectors, cables and other correspondence protocols that enable power supply and trade of data between gadgets and equipment, such as personal computers and smartphones. USB Power Adapters are designed to re-arrange and improve the electric energy supplied and the interface. Modern USB Power Adapters sense if they are connected to PCs or smartphones, and adjust the power output…
USB Cable Market is driven by Innovation Of Super Speed USB Cables
Universal Serial Bus (USB) cable are used for the purpose of connecting a USB device with a host device which may include wide range of computing devices, gaming consoles and others. There are several types of universal serial bus standards which include USB cables which are acquiescent with USB 1.1 specification and this would match with universal serial bus 2.0 technology and vice versa. The universal serial bus cable may…
USB-PIO-OEM: Digital Control and Acquisition via USB
Maisach (Munich) / Germany. BMC Messsysteme GmbH (bmcm) introduces a highly-integrated OEM version of the versatile I/O module USB-PIO. The USB-PIO-OEM can be used to equip devices with a modern and powerful USB interface.
The USB-PIO of BMC Messsysteme GmbH (bmcm), longtime specialist for PC measurement technology "made in Germany", looks back on an impressive success story.
Regarding its use, customers again and again prove to be amazingly creative. Whether as…
ECB approve the NV9 USB & NV10 USB
Innovative Technology Ltd is pleased to announce the NV9 USB & NV10 USB bank note validators have both received European Central Bank (ECB) approval for their ability to recognise Euro Note counterfeits.
The European Central Bank, test banknote authentication devices on their ability to recognise genuine Euro notes and identity counterfeits. The results, published on-line, are available to assist banknote users when selecting appropriate counterfeit detection equipment.
Marketing Executive, Dayna Patterson…
Data acquisition systems USB-AD, USB-PIO: Where is the measurement device?
What some might consider as an incomplete delivery is the real clou: Customers, who order a USB device at bmcm for analog or digital measurement data acquisition, receive a red USB cable with an attached 25- or 37-pole Sub-D connector. That's supposed to be all? No, of course not! A "Software Collection" CD is included as well.
Everybody who is not discouraged until now, and connects the USB cable to…
Keyspan USB Print Server and USB Extender Shares USB Devices on a Network
Keyspan is now shipping its new USB 2.0 Server. The server combines the functionality of a USB print server and USB extender. It allows PC and Mac clients to access two Hi-Speed USB 2.0 devices over Ethernet or WiFi. Keyspan\'s USB 2.0 Server lets multiple users share USB devices on a network and extends a USB connection--between a host PC and the USB device--over any distance.
The USB 2.0 Server eliminates…