Press Releases from J-Works (6 total)
USB Watchdog Timer Module WDT with 15Amp Event Relay Module.
J-Works. Inc has start shipping the WDT284 series of USB 2.0 watch dog timer (WDT) modules. Computer hardware devices or programs may lockup. To reduce the risk and possible damage a lockup can cause, there is two possible methods (1) redundancy (2) watchdog timer. Neither method offer 100% protection, but both reduce risk or consequences of failure. Redundancy, a duplication of hardware is very expensive. The WDT284 watchdog…
USB control of 15Amp relay module
JSB284 series of USB 2.0 Controlled module 15Amp Relays. Each relay contact is rated at 15 amp @ 125VAC and 10 amp @ 30VDC Blade type lugs are on the module to provide quick and easy connector to user hardware. Easy to use software interface includes a windows driver and a DLL or Class Library API. Linux support disk is also available. This small form factor module replaces…
USB Internal Mount Watchdog Timer Module WDT Module
J-Works. Inc has start shipping the WDT205 series of USB 2.0 internal mount watch dog timer (WDT) modules .Computer hardware devices or programs may lockup. To reduce the risk and possible damage a lockup can cause, there is two possible methods (1) redundancy (2) watchdog timer. Neither method offer 100% protection, but both reduce risk or consequences of failure. Redundancy, a duplication of hardware is very expensive. The WDT205…
USB high speed arbitrary digital waveform generator Module
The JSB810 USB Pattern Generator module is a high speed arbitrary digital waveform generator. A 16 bit wide digital pattern can be up to 256K words in length and be clocked up to 100Mhz with an on-board clock or user supplied clock. Pattern data is stored local on the module, so USB traffic or speed does not de-grade the signal quality. The outputs are typically used to send stimuli…
USB 8 Amp SPDT Relays with multi function IO options Model MCSB2101
J-Works has started shipping Model MCSB2101 USB controlled high current relays (8 amp) with optional digital and/or ADC inputs. The module can have 2 optional IO configurations. Each of the configuration options can be any of the following: 8 bit Digital IO, 8 bit Darlington output drivers, 8 bit differential input or output, or 4 channels of ADC input. Digital IO is 3.3v (LVTTL) and is 5V Tolerant.…
J-Works JSB291-03 USB controlled SPDT 20 Amp relay module now in full production
The JSB291-03 provides full control of 3 Single Pole Double Throw 20 Amp relays from any host USB port. It will switch up to 250VAC. It has a simple to use Windows interface using either a traditional DLL. Sample source is included showing how to use various high level languages to control the device. A Linux support disk is also available. Screw type terminal blocks are on the module to…
Go To Page: 1