SGS NDT technician passed the Chinese Radiation Safety Course and Examination
The course teaches general rules, procedures and responsibilities for personnel working with radiation. Radiation safety may seem simple in principle, but accidents involving over-exposure from gamma sources and x-rays occur at a rate that demands vast improvement. For SGS it is very important to demonstrate to both SGS personnel and SGS clients that safety ALWAYS comes first!
Radiographic Testing is a Non-Destructive Testing method where radiation is transmitted through material, based on the same principle as medical radiography in a hospital. A radiographic film on the remote side of the material detects the radiation and measures the various quantities over the entire surface of the film. Discontinuities in the material affect the amount of radiation being received by the film. Qualified inspectors can interpret the resultant images and record the location and type of defect present in the material.
Radiographic material and x-ray generators that are used in industrial radiography emit harmful ionizing radiation that present a major hazard to the workers and public. This demands that all workers with ionizing radiation undergo extensive training to ensure they can operate the equipment correctly and provide protection to them selves and the general public.
Approved radiation safety procedures and regulations when working with radioactive materials are the only way to prevent harmful exposure to this dangerous radiation. Therefore the SGS NDT Training & Examination Center offers training courses in radiation safety with the main objective being to prevent the spread of contamination and to protect both individuals and the environment.
The SGS NDT Training Center in China offers training and certification for NDT methods and inspections in accordance with world class standards. The aim is to provide certified personnel to ensure better and safer inspections.
SGS Non-Destructive Testing Services has many more advanced technologies for examining products and Radiographic Testing is just one of many available to us.
The SGS Group is the global leader and innovator in inspection, verification, testing and certification services. Founded in 1878, SGS is recognized as the global benchmark in quality and integrity. With more than 55,000 employees, SGS operates a network of over 1,000 offices and laboratories around the world.
NDT Training & Examination Center SGS-CSTC China
2F, Building 8,
69 Kangqiao Industrial Park,
1159 East Kangqiao Road,
Shanghai 201319, P.R.C.
t: +86 (0)21 6818 3905
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release SGS NDT technician passed the Chinese Radiation Safety Course and Examination here
News-ID: 81335 • Views: 820
More Releases from NDT Training & Examination
SGS attended Far East Forum on Non-Destructive Testing in China
The Far East Forum on Nondestructive Evaluation/Testing: New Technology & Application (FENDT) (http://www.fendti.com/), being held for the 5th time in 2009, provides a platform in China for NDT experts and professionals aiming to accelerate the scientific and technical development in the field of non-destructive testing. The four-day forum, held June 11-14 2009 in Suzhou, Jiangsu Province in China focused on five specific topics: inspection theory and basic technology research, development of
SGS Time of Flight Diffraction Training Course in China
Reacting to an increasing demand for qualified NDT inspectors, SGS established a Non-Destructive Testing Training and Examination Center in Shanghai, China. The SGS Training and Examination Center offers training and certification as well as examination opportunities for Non-Destructive Testing in accordance with worldwide standards. For the first time the SGS NDT Training and Examination Center hosted a Time of Flight Diffraction (TOFD) Level 2 SNT training course. Candidates from all over
SGS-NDT Training and Examination Center becomes an Accredited Training Organizat …
The SGS-NDT Training & Examination Centre has successfully passed an audit by the British Institute of Non-Destructive Testing (BINDT) as is now an Accredited Training Organization (ATO). This authorizes SGS to conduct both Training and Examinations in accordance with BINDT requirements, in China and around the world. It is an essential and increasing requirement of safety and quality assurance, that engineers and technicians are able to demonstrate the necessary level of
PCN follow up audit passed with zero non-compliance reports
After the SGS-NDT Training & Examination Center was granted the status of Authorised Qualifying Body (AQB), it has also now successfully passed the first follow up audit conducted by BINDT / PCN with zero non conformance reports. Following the previous successful AQB accreditation of the independently run SGS-NDT Training & Examination Center by the British Institute of Non-Destructive Testing (BINDT) back in July 2008, it was necessary to undergo the
More Releases for SGS
Experienced Willy Fabritius Joins SGS
With over a quarter of a century of experience in IT, information security and international standards, Willy Fabritius has joined world-leading testing, inspection and certification company SGS. Willy accepted the role of Global Head of Strategy and Business Development, Information Security Assurance this summer. He says: “I am delighted to join SGS, which has the incredible reputation of providing superb information security solutions across the world. “I will use my in-depth knowledge
SGS Launches the SGS Independently Checked Mark
SGS has launched the SGS Independently Checked Mark (IC Mark) to help manufacturers and retailers generate confidence and trust among consumers, bringing transparency to the complex world of product testing and regulation compliance. The IC Mark is currently available for all non-food consumer products. It proves the product has been independently tested by a third-party laboratory. Manufacturers and retailers can test products against one or more of the initiative’s six
SGS welcomes New Members in SGS CORREL Rail Team
As the leading independent certification body for the rail industry, SGS CORREL Rail has further strengthened its service portfolio with the appointment of a four-strong consulting team from Booz and Company. Strategic Rail Consultants Phil Taylor, Richard Bexon, Simon Lawson and Wendy Morgan, all previously employed by the global management consulting firm, joined SGS CORREL Rail in January. They will enhance SGS CORREL Rail’s existing capability and help support its future
SGS Serbia opens New Furniture Capabilities
The global leader in chemical testing and certification services SGS has opened a new furniture laboratory in Serbia in light of increased demand for furniture testing services. The new laboratory opened in Beograd in June 2011. SGS offers customized solutions to assist manufacturers in ensuring global furniture safety throughout the supply chain from the conceptual design to the delivery of the product in the store. SGS Serbia has achieved accreditation for tests
SGS Officially Opens SGS Wind Energy Technology Center (WETC) in Tianjin, China
In response to the high demand for full-scale testing of rotor blades on an international footing and in China, SGS Industrial Services officially opened the SGS Wind Energy Technology Center (WETC) on June 13, 2011, in Tianjin, China. The opening ceremony was a high-profile event attended by Mr. Yang Xiao Yong, Director of Tianjin Bureau Quality and Technical Supervision, Mr. Zhang Jun, Vice Director of the management committee of TEDA,
SGS Appoints New Global Sales Manager for SGS Industrial Europe
SGS Industrial Services appointed Laurent Pradere as the new Global Sales Manager in Europe. With fifteen years of working experience in the sales and marketing sector, Laurent will support the growth of SGS Industrial Services in this region. According to the Global Sales and Marketing Director Didier Suchet, Laurent has just the right profile for the position of the Global Sales Manager for Europe. "His strength lies in the depth of