openPR Logo
Press release

Infrared Heat Increases Productivity of Flameproof Textiles

05-06-2009 09:28 PM CET | Industry, Real Estate & Construction

Press release from: Heraeus Noblelight

Medium wave infrared emitters from Heraeus Noblelight being used to dry flame retardant coatings

Medium wave infrared emitters from Heraeus Noblelight being used to dry flame retardant coatings

High-quality home textiles for curtains, armchairs and sofas should not only look decorative, they also have to be hard-wearing and flameproof. Textiles usually get flame-retardant by a coating with special chemicals or saline solutions.
By retrofitting a new, Heraeus medium wave infrared system at their South Ockenden factory, Essex Flameproofing have been able to treble the capacity of the drying process used in the production of fire retarding upholstery and curtains. At the same time, they have also significantly reduced energy consumption.

Forgotten candles or a short circuit in the toaster - just at home it can burn fast if one does not pay attention. Curtains and home textiles should not contribute to the spreading of a fire and therefore they have to be equipped with flame-retardant properties.
Essex Flameproofing is a long-established company which works with designers and specifiers, fabric manufacturers, major retailers and upholsterers to impart fire-retarding properties to furniture and fittings. This is achieved by treating the fabric of the upholstery or curtains with flame-retardant chemicals to comply with British and foreign standards and flame retarding regulations. The application of the relevant chemicals/coatings is a wet process and drying is, necessarily, an important production stage.
Upholstery is made fire-resistant by spraying the back of the upholstery cloth with a latex flame-retardant coating, which must then be dried. Previously this was achieved by heating the coated upholstery web with a long wave infrared system. However, to meet increasing demand for the company’s expertise, it was decided to investigate ways of speeding up the drying process.
As a result, a new Heraeus medium wave infrared system was retrofitted at the Ockenden factory. This consists of an aluminium framework, which houses 21, 4.5kW emitters, which are arranged to be switched on and off in seven banks of three emitters, to match the heating profile to the product to be dried. Such has been the success of the new system, which is ready to run within one minute of switch-on, that coated upholstery fabric can be dried in a single pass whereas three passes were often required with the previous system. This is partly due to the efficiency of medium wave infrared in water removal, as radiation at medium wave frequency is readily absorbed by water molecules and the energy is rapidly converted into heat.
The new system also finds further employment when it is used to provide extra capacity to dry treated curtains. Curtains are made fire-retardant by spraying them with a salt-based solution, which soaks into the fibres. When curtains come Scotch guarded, or when fabrics have low permeability, the uptake of the solution needs to be assisted by passing the wetted curtain through nip rollers. Normally, curtains are dried on their own line, but when there is capacity on the new Heraeus system, they are passed through for
drying, again at twice to three times the speed.

Heraeus Noblelight GmbH with its headquarters in Hanau and with subsidiaries in the USA, Great Britain, France, China, Australia and Puerto Rico, is one of the technology and market leaders in the production of speciality light sources. In 2008, Heraeus Noblelight had an annual turnover of 92.5 Million € and employed 735 people worldwide. The organisation develops, manufactures and markets infrared and ultraviolet emitters for applications in industrial manufacture, environmental protection, medicine and cosmetics, research, development and analytical laboratories.
Heraeus, the precious metals and technology group headquartered in Hanau, Germany, is a global, private company with over 155 years of tradition. Our businesses include precious metals, sensors, dental and medical products, quartz glass, and specialty lighting sources. With product revenues approaching € 3 billion and precious metal trading revenues of € 13 billion, as well as over 13,000 employees in more than 110 companies worldwide, Heraeus holds a leading position in its global markets.

Heraeus Noblelight GmbH
Reinhard-Heraeus-Ring 7
D-63801 Kleinostheim
www.heraeus-noblelight.com/infrared
Press: Dr. Marie-Luise Bopp
marie-luise.bopp@heraeus.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Infrared Heat Increases Productivity of Flameproof Textiles here

News-ID: 78688 • Views:

More Releases from Heraeus Noblelight

Infrared Heating helps to ensure quality in the manufacture of composite structures for airplanes
Infrared Heating helps to ensure quality in the manufacture of composite structu …
An infrared heating system from Heraeus Noblelight is helping to ensure the high quality of composite aerospace structures manufactured at the new GKN Aerospace facility at Western Approach, near Bristol. The system, which is used to provide interim processing of the laid-up composite rear spar assembly of the Airbus 350 XWB to prevent subsequent wrinkling, was custom-designed and developed in close co-operation with GKN Aerospace engineers following initial tests at
Seven Good Reasons for the D2plus Light module
Seven Good Reasons for the D2plus Light module
Heraeus Noblelight, one of the technology and market leaders in the field of specialty light sources will again exhibit at ANALYTICA, to be held in Munich, Germany in April 2012. Heraeus will introduce its “Seven Good Reasons for D2plus Light modules” at the show, making the life of instrument developers easier. Developing new analytical instruments places ever-increasing demands on engineers, to design-in the best available light-source and avoid future operational problems.
Specialty Light Sources for the Printing Industry
Specialty Light Sources for the Printing Industry
Hanau, February 2012 The Competence in Specialty Light Sources for printing systems Special and personalized printing processes need special treatment. The ink of ink jet or laser printers need to be completely dried or cured before the printed sheets are passed on for subsequent operations such as stacking, cutting, folding or gluing. Infrared or UV technology is used for drying and curing, depending on the type of ink. Heraeus Noblelight presents its
Infrared Emitters Improve Lacquered Surfaces
Infrared Emitters Improve Lacquered Surfaces
Many screens, internal claddings in cars and high value cosmetic packages are manufactured from plastics and contain a protective lacquer or finishing. The drying of the coating on the plastic components is not a trivial matter, for the surfaces need to be perfectly cured without applying to much heat to the plastic. Infrared heaters transfer energy in a contact-free manner and are easy to control. Consequently, the heat is precisely

All 5 Releases


More Releases for Medium

Global Medium Power Transformers Market | Global Medium Power Transformers Indus …
Medium power transformers market comprises of sales of medium power transformers. Medium powers transformers are utilized in lowering voltages to the level required and are adequate for voltage regulations. These types of transformers are generally used in the construction and manufacturing industries. These medium power transformers manufacturing establishments manufacture the power transformers with ratings of 501 MVA to 800 MVA. According to study, “Medium Power Transformers Global Market Report 2020-30:
Global Medium Switchgear Market | Global Medium Switchgear Industry | Medium Swi …
Medium voltage switchgear market comprises of sales of medium voltage switchgear & related services that manufacture the medium voltage switchgear which are electrical switchgear rated between 2KV and 36KV. Medium voltage switchgear is a combination of electrical switches, fuses/circuit breakers used to function, secure and separate electrical equipment. It is used for providing protection to different electric motor control systems that installed in different end user segments. According to study,
Global Growth Medium Market Insights, On Demand, Future Trends, Market Growth, D …
Market Research Hub (MRH) has actively included a new research study titled “Global Growth Medium Market Insights, Forecast to 2025” to its wide online repository. The concerned market is discoursed based on a variety of market influential factors such as drivers, opportunities and restraints. This study tends to inform the readers about the current as well as future market scenarios extending up to the period until 2025. In addition, a
Medium Voltage Switchgear Market
Attributable to the nearness of worldwide and provincial merchants, this market is divided. They sellers in the market are contending based particle the cost, item offering and dispatch of new item in the market. The expansive firms in the market are having significant offer because of variables, for example, item plan, quality, turnaround time, administrations offered, highlights of the item, and upkeep of client connections. Major organizations in the worldwide
Global Medium-Heavy Plate Market 2018 -Sanming Steel Works, YingKou Medium Plate …
Apex Market Reports, recently published a detailed market research study focused on the “Medium-Heavy Plate Market” across the global, regional and country level. The report provides 360° analysis of “Medium-Heavy Plate Market” from view of manufacturers, regions, product types and end industries. The research report analyses and provides the historical data along with current performance of the global PP Pipe industry, and estimates the future trend of Medium-Heavy Plate on
Medium Voltage Switchgear Market: Rise in Government Activities to Propel Global …
Attributable to the nearness of worldwide and provincial merchants, this market is divided. They sellers in the market are contending based particle the cost, item offering and dispatch of new item in the market. The expansive firms in the market are having significant offer because of variables, for example, item plan, quality, turnaround time, administrations offered, highlights of the item, and upkeep of client connections. Major organizations in the worldwide