Online Condition Monitoring of Process Machinery
In the process industry, online condition monitoring of production-critical machines is becoming increasingly important with the rise of the Internet of Things. As a result, manufacturers are gradually replacing their redundant equipment with modern, PC-based data acquisition technology which enables predictable maintenance and scheduled production downtimes.
Remote data acquisition and visualization
To achieve this approach, factories and plants need a remote stand-alone system capable of continuous data acquisition and evaluation. Additionally, in the event of alarm limit violations (such as excessive tank temperature etc.), the measurement system has to react immediately and generate a warning signal. Another important requirement is connection to the production and office networks and to the process control system.
Designed specifically for high-speed measurement, ADwin data acquisition systems are flexible, expandable and easy to program using a real-time development tool. It’s equally easy to transfer machine and process characteristics over to an ADwin system.
The ADwin system can be connected to the process control system by analog and digital signals or by using serial interfaces and bus systems. Via Ethernet and a graphical user interface, the current machine state can be visualized on various PCs in the company network. The information can then be displayed e.g. by a traffic light indicator or as a line chart.
Continuous evaluation of complex limiting values
Machine and plant limit values can all be adjusted in the graphical user interface on the PC. Multiple machine states can be controlled and visualized using just one user interface. Recording in standalone mode fully-independently from the PC, the ADwin system performs:
• Pre- and post-trigger functions
• Synchronized data acquisition (angular and chronological)
• Evaluation of limit values and alarm capability
• Data reduction by online calculation of condensed parameters
Machine diagnosis and early failure detection
ADwin’s continuous monitoring of production-critical equipment already delivers important data right after start-up. The integration of real-time monitoring into the production process shows users how specific operation conditions are really affecting their machines’ characteristics. ADwin is also an ideal way to instantly evaluate compliance with specific process parameters (temperature, current/voltage, etc.).
During a production run, any sudden changes of machine condition in correlation to operating parameters can be immediately recognized and acted upon. Users can also display condensed parameters or traffic light indicators to enable quick interaction of service teams.
Most importantly, maintenance work and downtimes can be scheduled and carried out in time to help avoid process delays and shutdowns. This benefit results in long-term ROI.
ADwin is the window to your production plant
For more information on ADwin Data Acquisition Systems, or to find the ideal solution for your application-specific needs, contact a CAS DataLoggers Application Specialist at (800) 956-4437 or visit our website at www.DataLoggerInc.com.
Computer Aided Solutions, LLC. dba CAS DataLoggers is a distributor of data loggers, paperless recorders and data acquisition equipment.
Computer Aided Solutions
8437 Mayfield Rd., Unit 104
Chesterland, OH 44026
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Online Condition Monitoring of Process Machinery here
News-ID: 596495 • Views: 365
More Releases from CAS DataLoggers
Visit CAS DataLoggers at AHR 2020
The World’s Largest HVAC event is about to get underway—the annual AHR 2020 Expo is returning to Orlando, FL on Feb 3-5th. CAS DataLoggers Sales Mgr. Peter Martin is proud to attend along with Japan’s #1 datalogger manufacturer—T&D! Come visit us at Booth #7490 to see our cutting-edge HVAC solutions for performance validation, energy audits, and more! With prices starting at just $109, T&D products give businesses and organizations an affordable
New ADwin-X-A20 Compact Data Acquisition System
CAS is pleased to announce the new ADwin-X-A20 compact data acquisition and control system. It features a high performance, dual-core, 64-bit processor plus analog and digital inputs and outputs and a 1GB Ethernet communications interface to provide extremely precise, low latency real-time operation. Programs can be quickly created using either the user-friendly ADbasic development environment or through Simulink via the ADsim interface. Standard Features: -XILINK ZYNQ ARM Cortex-A9 666 MHz CPU, 64-Bit
New Novus DigiRail Connect Ethernet I/O Module
CAS Dataloggers is pleased to announce the new Novus DigiRail Connect, an intelligent, distributed I/O module that can be used to expand data logging and data acquisition systems. A built-in Ethernet port allows it to act as a Modbus TCP server to send data over the network. This versatile product features mixed analog and digital inputs and outputs, which accept a variety of standard sensor and signal types including thermocouples,
Identifying Water Meter Tampering Using a Data Logger
Advanced dataTaker Monitoring Solution Catches Utility Theft CAS DataLoggers supplied the industrial data logging solution for Pasco County Utilities, a provider of utility services to customers at a reasonable cost and in an environmentally responsible manner. The Utility Services Branch provides water and sewer services, reclaimed water, solid waste/resource recovery, recycling, hazardous waste, and street lighting service to most of the residents in Pasco County. The company maintains many remote water
More Releases for ADwin
Scanning Electron Microscope Loop Control Using ADwin
ADwin-Gold-II DAQ System Offers High-Speed Control scanning electron microscope application photoCAS DataLoggers supplied the control solution for a university physics department conducting research using a scanning electron microscope (SEM). SEMs generate extremely high-resolution (on the nanometer level) images by focusing a narrow electron beam to scan the sample. Part of the beam is absorbed by the material being scanned, but about 10-20% of the electrons are reflected off the surface. These
Cold Atom Physics Experiments Controlled by ADwin
ADwin-Pro-II Real Time Data Acquisition & Control CAS DataLoggers provided the data acquisition and control solution for a professor of physics, specifically focusing on cold atom physics at a major university. They began running an experiment producing ultracold quantum gases containing either bosons and fermions. The experiment took place under high vacuum inside a pyrex glass cell. Researchers collected the atoms in a magneto-optical trap (MOT) which consisted of 6 laser
ADwin for Plastic Injection Molding Process Monitoring
Control Shot Injection with an ADwin Gold System Recently CAS DataLoggers interviewed a long-time customer using an ADwin-Gold Real-Time Data Acquisition & Control System. Read on to learn how his plastic injection molding business has benefitted from high-speed data acquisition—and how your business can do the same. Q&A Session Q: You have been using the ADwin Gold system for plastic injection molding process monitoring of your equipment for several years now, how do
ADwin for High-Speed Test & Control Tasks
Real-Time Data Capture & Control for High-Speed Applications Manufactured in Germany, ADwin data acquisition systems provide tight nanosecond-level speed for the most demanding test and control applications. Whether users need to control a test bench, a PLC, or an electron microscope, ADwin has the performance to fulfil the highest-precision applications. Learn more about ADwin control systems by calling CAS DataLoggers today at (800) 956-4437. Ideal for Many Applications: • Automotive R&D and Production • ECU test,
ADwin for Test & Control of Rotating Machines
Real-Time Data Acquisition Systems for Machine Test Stands Automotive test bench applications require real-time test and measurement to increase PQ and to lower recall rates. To achieve this, the use of data acquisition and control systems is especially common in test stand setups. In particular, product quality technicians and test system integrators who need to view accurate data from rotating/spinning parts in motors, car engines, etc. are often concerned with the
Intelligent Data Logging Using an ADwin
Data Logging with Real-Time Pre-Processing of Data ADwin Real-Time systems are ideal for intelligent data acquisition and control applications. Utilizing the programmability of the local CPU in the ADwin, users can run real-time datalogging and/or control programs with kHz execution speeds up to the MHz range. CAS DataLoggers offers these systems along with technical support-- contact a CAS Data Logger Applications Specialist at (800) 956-4437 or visit our website at www.DataLoggerInc.com. ADwin’s