openPR Logo
Press release

Example of standardized overpressure system

06-21-2017 02:59 PM CET | Industry, Real Estate & Construction

Press release from: Quintex GmbH

Standardized overpressure system with release by gas detection

Standardized overpressure system with release by gas detection

This is an example of our space saving and easy to handle overpressure system 2.0. We are working with release by gas detection, so that no volume calculation, flow calculation and programming must be done. A real alternative to large and heavy flame proof cabinets. This is ready to ship and by the weight not too expensive. More about our standardized system you will find here:
https://goo.gl/HPhRf3

Quintex GmbH manufactures and supplies material for trace heating (heating tapes, heating cables, controller, connection sets) and explosion protection ( Ex e terminal boxes, purge systems, line bushings, cable through feeds, local control stations;fast supply via our web shop easy to handle). With our online calculator for most of our customized products you are able to design and calculate online 24/7 your special product.

Quintex GmbH
i_Park Tauberfranken 13
D-97922 Lauda-Königshofen
+49 (9343) 6130-0
www.quintex.eu/en

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Example of standardized overpressure system here

News-ID: 589246 • Views: 493

More Releases from Quintex GmbH

Pressurized HMI in Ex Zone 1 at an automotive supplier
Quintex GmbH was able to win an order with a leading manufacturer and OEM for sealing systems in the automobile industry together with its customer, Göhler Anlagentechnik. For toluol supply facilities in zone 1, the customer required a system with a zone 2 panel by Siemens. In addition, the costumer required that the touch function of the twelve inch widescreen TFT display be completely retained even under harsh industrial conditions. Different solutions
Overpressure system with gas detection for hazardous areas (ATEX/IECEx)
We made a little video to show the ease of use of overpressure system in hazardous areas for un-approved devices. It is the easiest way to bring YOUR device into hazardous area too. The explosion protection at the "overpressure system 2.0" is realized by operating a non-explosion-protected equipment in a protected enclosure. This housing is protected by a durable pressure with air or an inert gas prior to penetrate the enclosure
Local Control Functions at a Fuel Loading Area
Ex certified Local control functions you find in many chemical and petrochemical Applications. A typical Application is a switch for Illumination. A big handle is therefore required to make sure that the people can switch on and off the Equipment easily also with gloves. The requirement is often very different. The showed application is a 2-pole main switch for illumination at a Tank Truck Fuel Loading Area operated by “NIS”
Electrical equipment in waste water treatment plants
The screen represents the first cleaning stage in a waste water treatment plant after the inlet. With this mechanical pre-treatment, the waste water is passed through a screen or sieve. Coarse dirt of all kinds, such as stones, branches, leaves, damp toilet paper, sanitary towels and a lot of other debris, get caught there and are removed from the further clarification cycle. Basically, different types of screens are used. These range from

All 5 Releases