LED emergency exit and escape route light fittings
Further, a version without a battery, powered by a central emergency supply, is available. Areas of application are escape doors, emergency exits, emergency routes and all areas where light is still required after a power failure.
Mounting : 345mm / 2 x 10Ø
Ingress protection: IP66
Temperature range: -20°C…+40˚C
Recognition distance : 25m
Battery operation : 17mA/2W;4VA
Without battery : 7mA/0,7W;1,5VA
Emergency escape route luminaries
Luminous flux: 440lm
Battery operation : 50mA/7W;13VA
Without battery : 65mA/7,5W;15VA
To get this material fast you can order them in our web shop or by email from stock.
or contact our product management :
Mr. Klaus Weiter
+49(0)9343 6130 212
Quintex GmbH manufactures and supplies material for trace heating (heating tapes, heating cables, controller, connection sets) and explosion protection ( Ex e terminal boxes, pressurized systems, line bushings,own range of local control function, local control stations - all can be specified and ordered online)
We manufacture all our material in our own approved (ATEX, ISO, FM, CSA...) facility.
By this we can guarantee our high level of quality, reliability and in time delivery.
i_Park Tauberfranken 13
+49(0) 9343 6130 0
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release LED emergency exit and escape route light fittings here
News-ID: 559654 • Views: 549
More Releases from Quintex GmbH
Pressurized HMI in Ex Zone 1 at an automotive supplier
Quintex GmbH was able to win an order with a leading manufacturer and OEM for sealing systems in the automobile industry together with its customer, Göhler Anlagentechnik. For toluol supply facilities in zone 1, the customer required a system with a zone 2 panel by Siemens. In addition, the costumer required that the touch function of the twelve inch widescreen TFT display be completely retained even under harsh industrial conditions. Different solutions
Overpressure system with gas detection for hazardous areas (ATEX/IECEx)
We made a little video to show the ease of use of overpressure system in hazardous areas for un-approved devices. It is the easiest way to bring YOUR device into hazardous area too. The explosion protection at the "overpressure system 2.0" is realized by operating a non-explosion-protected equipment in a protected enclosure. This housing is protected by a durable pressure with air or an inert gas prior to penetrate the enclosure
Local Control Functions at a Fuel Loading Area
Ex certified Local control functions you find in many chemical and petrochemical Applications. A typical Application is a switch for Illumination. A big handle is therefore required to make sure that the people can switch on and off the Equipment easily also with gloves. The requirement is often very different. The showed application is a 2-pole main switch for illumination at a Tank Truck Fuel Loading Area operated by “NIS”
Electrical equipment in waste water treatment plants
The screen represents the first cleaning stage in a waste water treatment plant after the inlet. With this mechanical pre-treatment, the waste water is passed through a screen or sieve. Coarse dirt of all kinds, such as stones, branches, leaves, damp toilet paper, sanitary towels and a lot of other debris, get caught there and are removed from the further clarification cycle. Basically, different types of screens are used. These range from