openPR Logo
Press release

Condition Monitoring of Electric Motors

04-04-2017 09:49 PM CET | Industry, Real Estate & Construction

Press release from: CAS DataLoggers

Accsense VersaLog for Multi-Channel Recording & Alarm

CAS DataLoggers recently provided the stand-alone condition monitoring solution for a factory producing machine parts. Worn down by years of use, an electric motor critical to the business would occasionally fail due to extended operation at high temperatures. This would often cause process delays or shutdowns, hurting profitability.

To conduct predictive maintenance, the factory needed reliable condition monitoring before problems could get worse, and also required local alarm notification when temperatures went above 160°F.

Multi-Channel Solutions
Management installed three Accsense VersaLog TH Thermistor Data Loggers which are now mounted on three operating motors. Designed for multi-point temperature monitoring, Accsense VersaLog dataloggers are a portable and stand-alone solution for data recording applications that also require a local alarm notification. Models commonly feature 7-8 channels with models to log temperature, humidity, current or voltage.

The Accsense dataloggers now continually monitor the motor temperature as the most effective failure indicator to keep tabs on. Each logger features seven range 10K thermistor input channels to cover wide measurement requirements. For environmental applications, one on-board thermistor channel can monitor ambient temperature.

The motor temperature of each gearbox is recorded by connecting a datalogger to each. Each logger is connected to five high-accuracy thermistor temperature sensors (with cable lengths up to 20 feet in length) to monitor the temperature of all 5 points. The thermistors are contact-mounted to get accurate measurements. User-set sampling rate is flexible and can be set anywhere from 30 seconds to every 24 hours.
Each datalogger also has an LED for local alarm notification and two editable alarm thresholds per channel. Using this software, users have set alarms for each thermistor channel in use at 160°F.

Retrieving the Data
All Accsense VersaLog data loggers have a built-in USB port for connection to a PC for configuration and downloading data, plus an auxiliary serial port and 4-Megabytes of memory. Here, users are relying on USB as a simple way to retrieve data.

An optional USB device server allows multiple Accsense VersaLog loggers to be connected to a single Ethernet port allowing remote, network access. These devices can report alarm status to host PC via USB, Modem or Ethernet Device Server using Accsense SiteView software.

Analysis Software
VersaLog SiteView software is compatible with Windows XP, Vista or Windows 7, 8, 10. It can be used to configure the data loggers, retrieve stored data, graph the measurements and save or export the data. It also offers the ability to view real-time data from any connected loggers, a powerful calibration tool, and an alarm management tool to allow local notification or an email notification of an alarm condition.

Business Benefits
With Accsense VersaLog fully deployed, the factory now has reliable notification of unsafe motor temperatures. In turn this helps its processes to run uninterrupted since equipment maintenance and repairs can be scheduled ahead of time. The loggers are both affordable and a low-power way to cover all the necessary monitoring points.
For more information on Acccsense Versalog products, or to find the ideal solution for your application-specific needs, contact a CAS DataLoggers Application Specialist at (800) 956-4437 or visit our website at www.DataLoggerInc.com.

Computer Aided Solutions, LLC. dba CAS Data Loggers is a distributor of data loggers, paperless recorders and data acquisition equipment.

Computer Aided Solutions
8437 Mayfield Road
Chesterland, OH 44026
(440) 729-2570

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Condition Monitoring of Electric Motors here

News-ID: 491724 • Views: 256

More Releases from CAS DataLoggers

Visit CAS DataLoggers at AHR 2020
The World’s Largest HVAC event is about to get underway—the annual AHR 2020 Expo is returning to Orlando, FL on Feb 3-5th. CAS DataLoggers Sales Mgr. Peter Martin is proud to attend along with Japan’s #1 datalogger manufacturer—T&D! Come visit us at Booth #7490 to see our cutting-edge HVAC solutions for performance validation, energy audits, and more! With prices starting at just $109, T&D products give businesses and organizations an affordable
New ADwin-X-A20 Compact Data Acquisition System
CAS is pleased to announce the new ADwin-X-A20 compact data acquisition and control system. It features a high performance, dual-core, 64-bit processor plus analog and digital inputs and outputs and a 1GB Ethernet communications interface to provide extremely precise, low latency real-time operation. Programs can be quickly created using either the user-friendly ADbasic development environment or through Simulink via the ADsim interface. Standard Features: -XILINK ZYNQ ARM Cortex-A9 666 MHz CPU, 64-Bit
New Novus DigiRail Connect Ethernet I/O Module
CAS Dataloggers is pleased to announce the new Novus DigiRail Connect, an intelligent, distributed I/O module that can be used to expand data logging and data acquisition systems. A built-in Ethernet port allows it to act as a Modbus TCP server to send data over the network. This versatile product features mixed analog and digital inputs and outputs, which accept a variety of standard sensor and signal types including thermocouples,
Identifying Water Meter Tampering Using a Data Logger
Advanced dataTaker Monitoring Solution Catches Utility Theft CAS DataLoggers supplied the industrial data logging solution for Pasco County Utilities, a provider of utility services to customers at a reasonable cost and in an environmentally responsible manner. The Utility Services Branch provides water and sewer services, reclaimed water, solid waste/resource recovery, recycling, hazardous waste, and street lighting service to most of the residents in Pasco County. The company maintains many remote water

All 5 Releases


More Releases for Accsense

New WiFi Refrigerator Freezer Monitoring Kit from Accsense
Complete Kit for Monitoring Fridge and Freezer Temperatures Do you need a device to monitor the temperature of your perishable products stored in Refrigerators and Freezers? Now Accsense has a wireless kit with everything you need to begin monitoring temperature, right out of the box! This turnkey solution is ideal for hospitals, clinics, warehouses, restaurants and more. New from Accsense, the WiFi Refrigerator/Freezer Monitoring Kit completely automates temperature measurement, alarm notification, and
Accsense Customers Awarded the Gold Seal of Approval
Temperature Monitoring by Joint Commission Standards CAS DataLoggers is proud to celebrate the achievements of our customers! Our world-class Accsense monitoring systems have been in use in America’s hospitals since 2006, providing temperature monitoring, alarming and cloud data storage to protect children’s vaccine supplies, medications, blood products, and lab samples. We work with our customers to aid them in complying with the requirements of their accrediting body, and The Joint Commission
Accsense Electrocorder Offers Discount on Energy Data Loggers
Save 15% off Select Models! Starting today, CAS DataLoggers is offering a 15% discount on select models in its line of Accsense Electrocorder dataloggers! These electrical logging devices monitor power/energy, current/voltage, power factor and more. Our Application Engineers are available with more details—just call 1-800-956-4437! The Accsense Advantage: Accsense Electrocorder products use a constant sampling technique, unlike the single ‘snapshot’ reading of competing devices. When these data loggers start to record, they
Accsense Versalog Releases New Software Version
Versatile 8-Channel Data Loggers for Many Applications CAS DataLoggers is pleased to announce a new software upgrade for Accsense VersaLog dataloggers. Released in July, SiteView 3.1.1 extends functionality while adding various bug fixes. Accsense VersaLog products are ideal to capture and record your crucial data. If you need a cost-effect device to collect data and for local alarming, call CAS DataLoggers today at (800) 956-4437! Powerful Software: SiteView is a PC-based application
Record Current and Voltage with Accsense Electrocorder
DC-3VA Two-Channel DC Voltage and Current Logger Do you need a device to record current and voltage data for machine monitoring, circuitry test, battery charging/discharging, or another application? CAS DataLoggers offers the affordable Accsense Electrocorder DC-3VA Voltage and Current Data Logger Kit which records electrical data on 2 channels at fast sample rates and high accuracy. With its large memory, the DC-3VA is ideal for use in low-voltage and current applications.
Go Wireless with Accsense Monitoring Systems!
Accsense A1-01a Wireless Environmental Monitor CHESTERLAND, OH—May 4, 2016 If you need a device to monitor your product or environment, a wireless system is usually the easiest way to go. Accsense Monitoring systems are commonly used for temperature and humidity monitoring in hospitals and pharmacies, for environmental monitoring in industry and medical cleanrooms, cold chain storage, and in many other industries. Accsense can protect your business from losing inventory, experiencing process