openPR Logo
Press release

Accsense Electrocorder Offers Discount on Energy Data Loggers

08-10-2016 09:32 AM CET | Industry, Real Estate & Construction

Press release from: CAS DataLoggers

Accsense Electrocorder Data Loggers

Accsense Electrocorder Data Loggers

Save 15% off Select Models!
Starting today, CAS DataLoggers is offering a 15% discount on select models in its line of Accsense Electrocorder dataloggers! These electrical logging devices monitor power/energy, current/voltage, power factor and more. Our Application Engineers are available with more details—just call 1-800-956-4437!

The Accsense Advantage:

Accsense Electrocorder products use a constant sampling technique, unlike the single ‘snapshot’ reading of competing devices. When these data loggers start to record, they sample every channel 16 times per cycle (a cycle being 16ms at 60Hz and 20ms at 50Hz). We offer many different models to suit a wide range of monitoring applications and requirements.

At the end of each averaging period, the data logger saves 3 quantities for each channel: the True RMS average, the Max (the highest cycle value during the period) and the Min (the lowest cycle value). Accsense Electrocorder dataloggers will record all the peaks and valleys which are one cycle or longer.

Save 15% off select models including:

• DC-3V Three-Channel DC Voltage Logger (RS models only)
• DC-3VA Two-Channel DC Voltage and Current Logger (TT model only)
• EC-3A Single and Three-Phase Current Logger (RS model only)
• EC-1V Single-Phase Voltage Logger

DC-3V Three Channel Voltage Logger:
The DC-3V data logger is specifically designed to accurately monitor one, two or three DC voltage channels, 1V to 60Vdc. This allows you to monitor charger performance and PV (photovoltaic) cell output, as well as many other applications like DC motors.

DC-3VA Voltage and DC Current Logger:
The DC-3VA two channel data logger is specifically designed to accurately monitor one or two DC voltage channels, 1V to 300Vdc and one DC current channel, allowing you to monitor PV (photovoltaic) cell output, DC charger performance, as well as many other applications - like DC motors.

EC-3A Single & Three Phase Current/Load Logger:
This data logger is specifically designed to monitor one, two or three current channels, allowing you to monitor the loading and energy consumption of the installation. The stored data is uploaded to a PC via the supplied USB cable.

EC-1V Single-Phase Waterproof Voltage Logger:
The EC-1V data logger is widely used to monitor voltage variations on site, allowing voltage problems to be highlighted quickly for further investigation using traditional recorders.

Configuration and Analysis Software:

FREE Electrosoft software is also provided in the kit, allowing users to define the voltage so they can plot power and energy, then simply upload recorded data via USB to a PC for analysis. Electrosoft allows you to graph and export data files as well as plot energy costs and savings using voltage optimization techniques.

For more information on Accsense Electrocorder dataloggers, or to find the ideal solution for your application-specific needs, contact a CAS Data Logger Applications Specialist at (800) 956-4437 or visit our website at www.DataLoggerInc.com.

Computer Aided Solutions, LLC. dba CAS Data Loggers is a distributor of data loggers, paperless recorders and data acquisition equipment.

CAS DataLoggers, Inc.
8437 Mayfield Rd.
Chesterland, Ohio 44026
(440) 729-2570
(800) 956-4437
sales@dataloggerinc.com
www.dataloggerinc.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Accsense Electrocorder Offers Discount on Energy Data Loggers here

News-ID: 355271 • Views: 492

More Releases from CAS DataLoggers

New NXprog Programmable I/O Module from Novus
We are pleased to announce the new DigiRail NXprog from Novus Automation. The NXprog unites the best of both worlds: the reliability and robustness of an industrial device for automation applications with the ease of programming from the Arduino community. It provides a rich mix of integrated analog and digital I/O signals, allowing DigiRail NXprog to be used as an extension of standard data logging, data acquisition, and automation systems,
New Simple Logger Series of Data Loggers from AEMC
CAS Dataloggers is pleased to announce the new Simple Logger® series of data loggers from AEMC. The SL family includes ten different small, one channel recording devices powered by two AA alkaline batteries. Models are available for recording AC voltage, DC voltage, DC current, temperature, or digital pulses and events. The simple logger series are extremely easy to configure with just a few parameters to setup – scaling, measurement units,
New DT90 Series Data Loggers from dataTaker
CAS is pleased to announce the new dataTaker DT90 Series of compact, cost-effective, low power data loggers. The new DT90 Series is designed to provide an all-in-one data collection system with an integrated modem, specifically for remote applications. The rugged enclosure and wide operating temperature range provide reliable operation in virtually any environment. There are two models available – the DT90L and DT90N. The DT90N is perfect for
Introducing OdaLog Gas Data Loggers from ThermoFisher
CAS DataLoggers is introducing OdaLog Odor & Gas Data Loggers, a family of portable gas monitors from ThermoFisher Scientific. Effective immediately, CAS will be responsible for the sales and support of all OdaLog products within the United States. OdaLog, owned by ThermoFisher Scientific Australia Pty Ltd, are used extensively in the wastewater industry to record the level of Hydrogen Sulphide (H2S) and other gas emissions in pumping stations, manholes and sewer

All 5 Releases


More Releases for Logger

Runtime Monitoring Using a dataTaker Data Logger
For Machine monitoring, Productivity Assessment & Troubleshooting At CAS DataLoggers, many of our callers want to see how often one or more of their machines are operating and when. This pinpoints machine downtime and can identify poor work productivity, or identifies if another cause is at work (power outages etc.) In our latest Technical Article, we outline how to configure a Series 4 dataTaker DT8x Data Logger for runtime monitoring. What
WHAT IS A DATA LOGGER?
Understanding Data Loggers What is a data logger? The generally accepted answer is that a datalogger is an electronic device that autonomously records data from some type of sensor and stores it in local memory with a time and date stamp. Data Loggers are widely used in virtually every industry for a variety of applications. Temperature is the most commonly measured parameter and is also the most commonly recorded parameter. There
Data Logger vs DAQ
Key Differences Between Data Logging and Data Acquisition What is the difference between a Data Logger and a Data Acquisition System (DAQ)? A data logger is a type of data acquisition system, but a data acquisition system is not necessarily a datalogger. There are several key functional differences in how the market understands these two classes of instruments. While the differences between these two types of instruments have been reduced
Weather Station Data Logger Collects Meteorological Data
Complete Weather monitoring using an Intelligent Universal Data Logger A construction company needed to collect meteorological data to study the effects of building materials such as roofing tile. CAS DataLoggers provided the dataTaker DT-85 for an environmental monitoring solution. Long-term monitoring of a variety of weather data is required to determine how the products perform under harsh environmental conditions. The field engineer desired a single recording device to connect with
Transformer monitor and logger
Transformer monitoring made easy!!!! Miro-F Transformer monitor and logger is a precision power quality instrument, intended for permanent installation and specifically designed for comprehensive and reliable LV side transformer monitoring. • Measure three phase voltages, four currents and two temperatures (ambient and surface).' • Information includes V, I, P.F, THD, Sags,Swells, Interruptions and other power quality measurements. • Integrated WiFi and Cellular (3G/4G), provides platforms for TCP/IP, FTP, CiDR and DNP3 (SCADA). • Suited for
Keystroke Logger
Keystroke logger has been used for many years as spy software in computer systems. Millions of people worldwide use the keystroke logger to track people’s activities. Keystroke logger is useful in office environment. In the office, there are employees who don’t pay attention at work. They don’t like to work. They surf the internet for their own purposes. It is not good to let employees slack as they are wasting