Press release
ADwin for CAN-FD Automotive Applications
Auotomotive Data Acquisition in Real-Time
CHESTERLAND, OH—April 19, 2016
With a flexible data rate over previous CAN limits, the CAN-FD network protocol provides faster and more reliable data transmission in automotive networks. Larger data payloads improve the CAN protocol’s efficiency and result in a higher communications throughput. Already widely in use in Germany, CAN-FD is commonly used in automotive applications such as OEM, system design and in real-time ECU simulation.
At CAS DataLoggers we can provide your automotive application with real-time systems from German manufacturer Jager-ADwin. Give our experienced Applications Engineers a call today at (800) 956-4437!
CAN-FD for Faster Data Rates:
In 2012 Bosch released CAN FD 1.0, also known as CAN with Flexible Data-Rate. The Can FD specification allows for improved bandwidth in both automotive and general industrial applications. Using a different frame format allowing for faster bit rates and a different data length, CAN FD is compatible with existing CAN 2.0 networks, so new CAN FD devices can coexist on the same network with existing CAN devices.
The ISO 11898-1:2015 standard specifies both the CAN and the CAN-FD protocols. CAN-FD boosts the bit-rate when only a single node is sending data, since synchronization with other nodes is not required. This allows users to break the CAN data transmit speed of 1 Mbit/s in the data phase where bitrate is only restricted by the individual transceiver. CAN-FD is also more reliable owing to improved failure detection.
ADwin for Real-Time Monitoring:
In automotive CAN and CAN-FD applications, German manufacturer Jager-ADwin is ideal for real-time data capture. ADwin real-time data acquisition systems are used for testing Automotive components, sensors and ECU's, electrical component test, control of servohydraulic systems, motion control, laser and ebeam control, signal generation and high- speed synchronized data acquisition.
ADwin systems support parallel real-time processes while running independently of the PC's operating system. These systems provide deterministic operation with response times of 1 usec. or less. A key feature of these products is their tightly-coupled analog and digital inputs along with counters which provide extremely low-latency operation.
Flexible Design:
ADwin systems are available in 3 form factors:
• The ADwin-Light-16 which offers 8 analog inputs—ideal for small-channel test applications.
• The ADwin Gold/Gold II with 16 analog inputs;
• and the ADwin-Pro/Pro II Series which utilize a modular form factor with plug-in modules to allow up to 480 analog or digital inputs in a single chassis.
Support and Software:
ADwin also offers a variety of other I/O options including CANbus, SSI, Profibus/Fieldbus, RS-232/485, and signal conditioner modules. Unmatched in the measurement technology industry, ADwin products stay supported regardless of longevity.
The ADwin software environment can be used under Windows (95/98/ME/NT/2000/XP/Windows 7) and LINUX or as a stand-alone data acquisition system. Also, ADwin has drivers for many of the popular programming environments including VB, VC/C++, LabVIEW, TestPoint and others. Software upgrades are free.
For more information on Jager-ADwin Real-Time Systems, to find the ideal solution for your application-specific needs, contact a CAS Data Logger Applications Specialist at (800) 956-4437 or visit our website at www.DataLoggerInc.com.
Contact Information:
CAS DataLoggers, Inc.
8437 Mayfield Rd.
Chesterland, Ohio 44026
(440) 729-2570
(800) 956-4437
sales@dataloggerinc.com
www.dataloggerinc.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release ADwin for CAN-FD Automotive Applications here
News-ID: 333806 • Views: …
More Releases from CAS DataLoggers
New XH10 & XH11: Data Loggers Enhance Long-Distance Transport
CAS DataLoggers is pleased to announce the XHLogger series from Brainchild Electronics Co., Ltd. The new XH10 and XH11 temperature and humidity data loggers are designed specifically for environmental monitoring during cargo transportation. These reusable devices connect to a computer via USB and automatically generate a PDF report of the recorded data, or they can be used in conjunction with the Data Logger Viewer (DLV) software for in-depth data analysis.…
New MSR Data Loggers from MSR Electronics GmbH
CAS DataLoggers is pleased to announce that we have partnered with Swiss company MSR Electronics GmbH to bring the MSR family of universal data loggers to our customers. Designed to meet the highest standards of precision and reliability, the new MSR data loggers are compact with large memory to handle various measurement tasks such as measuring and recording shocks, vibration, temperature, humidity, pressure, or light.
Why Choose MSR Data Loggers?
The ability…
Ensuring Workplace Safety: Data Loggers for Compliance With California Regulatio …
In workplaces across California, ensuring the health and safety of employees is paramount. This commitment is not just a moral imperative, but a legal requirement under California Code of Regulations Section 3395, which mandates specific measures to ensure workplace safety by protecting workers from heat illness. Among these measures is the monitoring of environmental conditions such as temperature and relative humidity, critical factors that can significantly impact employee well-being.
Understanding California…
New AirGate 4G Cellular Router from Novus
NOVUS presents AirGate 4G, an industrial VPN router for cellular networks. Data sending is secure with this new device as it uses encryption protocols and firewall systems most commonly used in IT infrastructures, including automatic fallback for 4G, 3G, and 2G cellular networks. AirGate 4G is CE Mark certified and was developed for industrial environments. It can maintain its high availability performance even in extended operation situations, being equipment suitable…
More Releases for ADwin
ADwin Test System Reduces Application Development Time
Real-Time Data Acquisition and Control
Test systems are used to determine the dynamic characteristics and parameters of components and sensors. In R&D, these systems acquire not only component parameters but also characteristics of prototypes and pre-production models. Component endurance is determined by testing them over thousands of test cycles. On production lines, test benches ensure a higher level of quality through either random sample or individual component testing (CAQ). Test information…
Scanning Electron Microscope Loop Control Using ADwin
ADwin-Gold-II DAQ System Offers High-Speed Control
scanning electron microscope application photoCAS DataLoggers supplied the control solution for a university physics department conducting research using a scanning electron microscope (SEM). SEMs generate extremely high-resolution (on the nanometer level) images by focusing a narrow electron beam to scan the sample. Part of the beam is absorbed by the material being scanned, but about 10-20% of the electrons are reflected off the surface. These…
ADwin for Plastic Injection Molding Process Monitoring
Control Shot Injection with an ADwin Gold System
Recently CAS DataLoggers interviewed a long-time customer using an ADwin-Gold Real-Time Data Acquisition & Control System. Read on to learn how his plastic injection molding business has benefitted from high-speed data acquisition—and how your business can do the same.
Q&A Session
Q: You have been using the ADwin Gold system for plastic injection molding process monitoring of your equipment for several years now, how do…
ADwin for High-Speed Test & Control Tasks
Real-Time Data Capture & Control for High-Speed Applications
Manufactured in Germany, ADwin data acquisition systems provide tight nanosecond-level speed for the most demanding test and control applications. Whether users need to control a test bench, a PLC, or an electron microscope, ADwin has the performance to fulfil the highest-precision applications. Learn more about ADwin control systems by calling CAS DataLoggers today at (800) 956-4437.
Ideal for Many Applications:
• Automotive R&D and Production
• ECU test,…
Intelligent Data Logging Using an ADwin
Data Logging with Real-Time Pre-Processing of Data
ADwin Real-Time systems are ideal for intelligent data acquisition and control applications. Utilizing the programmability of the local CPU in the ADwin, users can run real-time datalogging and/or control programs with kHz execution speeds up to the MHz range. CAS DataLoggers offers these systems along with technical support-- contact a CAS Data Logger Applications Specialist at (800) 956-4437 or visit our website at www.DataLoggerInc.com.
ADwin’s…
Jager-ADwin Releases New Software Update
Ver. 6.00.08.01 Adds Support for MATLAB, LabVIEW
CHESTERLAND, OH—June 20, 2016
Jager-ADwin has just released a new version of the ADwin CD-ROM. Version 6.00.08.01 adds more support for MATLAB and LabVIEW, improved cache management, and several minor bugfixes. ADwin data acquisition and control systems are ideal for applications in automotive test, laboratory data acquisition, product R&D and more. The new ADwin CD-ROM is ready for download at CAS DataLoggers on our ADwin…
