Remote Monitoring of important rooms and systems

Production, storage, laboratory, technical and server rooms located in remote locations must never be left unobserved. Heating, ventilation, refrigeration or air conditioning systems in a branch office can also fail and cause considerable problems. The equipment and systems located in telecommunications, technical, server and laboratory rooms can be damaged very quickly at critical temperatures. If the temperature in the server cabinet reaches a critical level, hard disks can fail. In the worst case, the loss of important data is imminent. The same applies to laboratory refrigerators. If the power supply to the laboratory fails, the samples in the freezers can be damaged very quickly.

Other risks and dangers, such as the uncontrolled leakage of water from pipes, air conditioning or heating systems or a brazier fire in the switch cabinet that is not detected in time, can have catastrophic consequences for the company affected. Important company premises must also be effectively protected against power failure, unauthorized access, burglary or vandalism.

All-round protection with monitoring technology from Didactum

With a networked remote monitoring solution from Didactum, each responsible person can effectively protect its locations and branches against a variety of risks and dangers. Each remote monitoring device works stand-alone and can be integrated into SNMP compatible building or network monitoring software. Critical measured values of the connected sensors are remotely transmitted to the company headquarters or control centre via the widely used SNMP protocol. It is irrelevant whether the location is in Germany or overseas.

Tailor-made area monitoring

Each remote monitoring device from Didactum can be equipped with individually selectable SNMP compatible sensors. After the sensor is connected via plug and play with the remote monitoring device, it is automatically detected and displayed in the German web interface. Here you can then define limits and alarm values and store the desired notification or alarm. Included in the delivery of each remote monitoring device is already the precise Didactum temperature sensor, so you get a network thermometer with extensive data logger and alarm message functions. For the remote monitoring devices is a very extensive range of IP capable sensors available. In addition to air humidity, air flow and water alarm sensors, SNMP compatible smoke detectors are also offered. Other sensors recommended for monitoring remote rooms and systems include water alarm cables, vibration, motion, gas and glass breakage detectors.

Equip also the existing doors, rolling gates, windows and skylights with the magnetic contact sensors from Didactum. You can also use your SNMP based remote monitoring device to measure and monitor current and voltage. Here Didactum also offers suitable voltage sensors, measurement converters and also electricity meters. If desired, the Didactum remote monitoring device can also control and monitor access to sensitive rooms and facilities.

Fault message contacts of the cooling or air conditioning system via Internet remote monitoring

Each remote monitoring device is equipped ex works with inputs for the connection of fault detectors from heating, ventilation or air conditioning systems. If a maintenance or fault message is signalled via the alarm contact, the remote monitoring device informs the facility manager and / or the control room. Besides sirens, flashing lights can also signal the fault.

Early notification in case of malfunctions at unmanned sites

If risks and dangers occur in the remote branch, remote monitoring device sends immediate messages and alarms to the responsible employees. Each remote monitoring device supports SNMP traps, SNMP polling, e-mail and also SMS (GSM or LTE modem required).

For more important information on the all-round protection of remote branches and locations, managers and decision makers can visit https://www.didactum-security.com. Technical instructions around the remote monitoring devices and sensors from Didactum are available at https://www.technologie-portal.de.

Didactum Security GmbH
Roger Oeltjendiers
Marsweg 17
48163 Muenster
Germany

Fon: +49 - 2501 - 9 78 58 80
Fax: +49 - 2501 - 9 78 58 82

The IT infrastructure monitoring systems of the manufacturer brand Didactum are manufactured within the E.U. The engineering and support is located in Muenster / Germany. Didactum monitoring systems are used wherever downtime is not tolerable. Gladly Didactum references in the field of monitoring server room and data center.

More information about Didactum monitoring systems and associated sensors can be found at https://www.didactum-security.com.

This release was published on openPR.