openPR Logo
Press release

Made in Germany: Industry leading X-Ray and Optical Test Equipment now available in the US

08-01-2011 06:50 AM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

X-Ray and Optical Test Equipment now available in the US

X-Ray and Optical Test Equipment now available in the US

GOEPEL electronic’s Automated X-Ray and Optical Inspection systems (AXI/AOI) are now available to the North American market. This is another important strategic step towards meeting the significantly increased demands for optical test equipment for mounted PCBs in the US and Canada.

“Numerous demands from potential customers asking for our AOI and AXI systems led to the decision to offer our optical inspection solutions directly on the US market,” explains Jens Kokott, Senior Manager Optical Inspection (AOI/AXI) with GOEPEL electronic.

David Whetstone, Sales President of GOEPEL electronics Ltd, based in Austin/TX, adds: “Many American engineers are keen to utilize technologically leading inspection equipment to ensure maximum product quality. In particular tasks such as inspection quality, easy program generation and low false call rates characterize our AOI and AXI machines best.”

GOEPEL electronics’ well-proven OptiCon AOI systems, offered in various configuration versions, can be applied in various PCB production areas, such as before or after the soldering process, and as as stand-alone and inline variants. The AOI systems are able to detect manufacturing faults on multiple pin components, such as faulty solder joints and missing, mis-aligned and wrong components. The OptiCon series systems were honored with several industry awards, including Test & Measurement World’s “Best in Test Awards” for OptiCon BasicLine and OptiCon TurboLine.

At the technological leading edge, there is GOEPEL electronic’s x-ray inspection system OptiCon X-Line 3D, which is unrivalled worldwide by utilising a revolutionary GigaPixel image technology. A real-time multi angle image recording capability is the basis that enables a test speed of 40cm²/s for full 3D PCB capturing. Integrated reconstruction methods, based on digital tomosynthesis, allows highly defined evaluation of the board’s single layers.

About GOEPEL electronic:
GOEPEL electronic is a worldwide leading vendor of professional electronic and optical test and inspection systems. Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 180 employees and generated a revenue of more than 22 Million Euro in 2010 (ca. $31 Mio). GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the company and its products can be found on the internet at www.goepel.com.

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK

Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk

Stefan Meissner
press@goepel.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Made in Germany: Industry leading X-Ray and Optical Test Equipment now available in the US here

News-ID: 185560 • Views:

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Error Rate Tests
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases


More Releases for Optical

Optical Lenses Market 2021 Competitive Insights - Canon, Sunny Optical, GSEO, Ki …
The quantitative and qualitative analysis is provided for the global Optical Lenses market 2021 considering competitive landscape, development trends, and key success factors of Key Players. The research report studies the Optical Lenses market using different methodologies and analyzers to provide accurate and in-depth information about the market. For a clearer understanding, it is divided into several parts to cover different aspects of the market. Each place is then elaborated to
Optical Fiber and Optical Fiber Cables Market
Optical Fibers and Optical Fiber Cables Market describes its growth, size, share, Forecast and trends to 2025 Optical Fibers and Optical Fiber Cables Market Production and Demand Analysis 2019 to 2025 Optical Fibers and Optical Fiber Cables Market 2019 Manufacturing Analysis and Development Forecast to 2025 Optical Fibers and Optical Fiber Cables Market 2019: Recent Study Including Growth Factors, Regional Drivers, Forecast 2025 Optical Fibers and Optical Fiber Cables Market Insights 2019, Global and
Passive Optical Component Market Report 2018: Segmentation by Application (Inter …
Global Passive Optical Component market research report provides company profile for Alcatel-Lucent S.A., ZTE Corp., Motorola Solutions Inc., Huawei Technologies Comp. Ltd., Tellabs Inc., Adtran Inc., Freescale Semiconductor Inc., Calix Inc., Mitsubishi Electric Corporation, Ericsson Inc. and Others. This market study includes data about consumer perspective, comprehensive analysis, statistics, market share, company performances (Stocks), historical analysis 2012 to 2017, market forecast 2018 to 2025 in terms of volume, revenue, YOY
Optical Switches Market Segmentation By Sales Channel OEMs (original equipment m …
Global Optical Switches Market: Overview Constant technological advancements and increasing network connectivity between devices is resulting in rising issues with respect to data generation and transmission. Increasing connectivity demands high-speed network connections to carry out data operations in a specified way and thus, optical networks are in demand these days. Optical switches are an integral part of fiber optic transmission systems. Optical switches are used to enable the routing of optical data
Synchronous Optical Networking Market Report 2018: Segmentation by Hardware (Opt …
Global Synchronous Optical Networking market research report provides company profile for Clena Corporation, Ericsson Inc., Fujitsu Ltd., Huawei Technology Co. Ltd., JDS Uniphase Corporation, MRV Communications Inc., Cisco Systems Inc., Alcatel- Lucent Inc., Verizon Communications Inc., ADVA Optical Networking SE and Others. This market study includes data about consumer perspective, comprehensive analysis, statistics, market share, company performances (Stocks), historical analysis 2012 to 2017, market forecast 2018 to 2025 in terms
Global Optical Connectors Market: By Application: Data Centre Optical Connectors …
Latest industry research report on: Optical Connectors Market : Industry Size, Share, Research, Reviews, Analysis, Strategies, Demand, Growth, Segmentation, Parameters, Forecasts Download Sample copy of this Report at :http://www.marketresearchreports.biz/sample/sample/1107689 A comprehensive research report created through extensive primary research (inputs from industry experts, companies, stakeholders) and secondary research, the report aims to present the analysis of Global Optical Connectors Market; By Type (Board to Board, Edge Card, Mid Board), By Application (Data Centre,