Press release
PULS UK Launches New 500W DC/DC Down Converter
PULS UK logo
At present linear regulators are commonly used to reduce DC supply voltages, but these operate by bleeding off excess power as heat and therefore waste a considerable amount of energy. The advanced technology used in the PULS YD25.241 delivers much greater levels of efficiency and also dramatically reduces the heat generated within the host device.
Although only positive output voltages are possible, the unit is ideal for non-standard voltages below 26.5V, or where an intermediate (e.g. 12 volts) bus is required. The unit has self adjusting over voltage protection, active inrush current limitation and reverse input polarity protection.
As with all PULS products the YD25.241 is DIN-rail mountable making installation simple and quick and at only 32mm x 124mm x 107mm is ideal for both new build and retro fitting.
PULS UK is a specialist manufacturer of DIN Rail power supplies and has developed some of the most advanced technologies for use within power supplies allowing them to achieve the highest efficiencies. PULS UK is a subsidiary of PULS GmbH, based in Munich, Germany. With three factories it is the second largest producer of DIN Rail power supplies in the world.
David Jordan
The Words Workshop Ltd
26 Swanwick Lane
Broughton
Milton Keynes
MK10 9LD
Tel: +44 (0) 1908 695500
Fax: +44 (0) 1908 690099
mailto:david@thewordsworkshop.co.uk
http@//www.thewordsworkshop.co.uk
All business enquires to:
Ellie Jones
PULS UK Ltd
Unit 10 Ampthill Business Park
Station Road
Ampthill
Bedfordshire
MK45 2QW
Tel: +44 (0) 330 999 9988
Fax: +44 (0) 1525 841291
mailto:ellie.jones@puls.co.uk
http://www.puls.co.uk
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release PULS UK Launches New 500W DC/DC Down Converter here
News-ID: 163815 • Views: …
More Releases from PULS UK
PULS Power Supplies Gain IECEx Approval for use in Explosive Environments
Power supply manufacturer PULS UK has enhanced the specification of a number of its units enabling them to obtain international IECEx approval. IECEx approval allows the power supplies to be used in Class 1 Div 2 atmospheres in many territories across the globe. These units already comply with the European ATEX standard and the Class 1 Div 2 HazLoc scheme covering the USA.
The IECEx Scheme was created to facilitate…
PULS UK Launches New High-Efficiency Convection Cooled 500 watt Power Supplies
DIN-rail power supply manufacturer PULS UK has announced the launch of its new high-efficiency 24V-20A and 48V-10A units. The CPS20 (241 and 481) use new topology to offer customers many features allied to the high-quality and outstanding reliability expected from PULS at a very competitive price.
The CPS20s deliver 94% efficiency and are packaged to take up only 65mm on the DIN-rail. PULS has ensured low losses even at…
PULS UK offers free UK-based technical support for power supply customers
DIN-rail power supply manufacturer PULS UK is offering free UK-based advice and technical support for all its power supply products. With technology advancing at such a rate PULS is keen to make sure customers are kept up to date and receive the help and advice they need to take full advantage of its latest products.
The company took the decision to base its support team in the UK to simplify…
PULS UK Gains ATEX Approval for ML Series Power Supplies
Leading DIN-rail power supply manufacturer PULS UK has been granted ATEX approval for its ML series of power supplies, allowing them to be used in certain hazardous environments. The single phase units have an output range from 5Vdc to 28Vdc and a power range from 15W to 100W, and will be available on special order for projects.
The units have been tested to EN 60079 – 15 and are approved…
More Releases for DIN
Perle Launches DIN Rail Hi-PoE Injectors
Perle Systems, a global provider of advanced Device Networking Hardware, today announced the availability of DIN Rail PoE Injectors.
INJ PoE Injectors are designed to provide up to 60W of IEEE802.3bt compliant power over Ethernet cabling to connected devices such as wireless access points, pan-tilt-zoom (PTZ) cameras and video phones. Power over Ethernet Injectors enable increased flexibility for the location of installed equipment and can support long Ethernet runs up to…
Perle launches DIN Rail Patch Panels
Simplify the connection between field cabling and control cabinet cabling
NASHVILLE, TN—June 25th, 2019 — Perle Systems, a global provider of advanced Device Networking Hardware, today announced the availability of DIN Rail Patch Panels.
One-to-one patch panels enable organised, flexible and easy connections between field cabling and the control cabinet. Standard Ethernet patch cables are used between the patch panel and the control cabinet equipment, such as PLCs, switches and routers. Through…
Global DIN Rail Mounted Accessories Market Professional Survey Report
This report studies DIN Rail Mounted Accessories in Global market, especially in North America, China, Europe, Southeast Asia, Japan and India, with production, revenue, consumption, import and export in these regions, from 2013 to 2018, and forecast to 2025. This report focuses on top manufacturers in global market, with production, price, revenue and market share for each manufacturer, covering ABB Eaton WAGO TE Connectivity Connectwell Schneider Electric Omron Wieland Electric…
Global DIN Rail Terminal Blocks Industry Market Analysis & Forecast
Global DIN Rail Terminal Blocks Industry Market Analysis & Forecast 2018-2023, the revenue is valued at USD XX million in 2017 and is expected to reach USD XX million by the end of 2023, growing at a CAGR of XX% between 2018 and 2023. The production is estimated at XX million in 2017 and is forecasted to reach XX million by the end of 2023, growing at a CAGR of…
DIN Connectors Market to Record an Exponential CAGR by 2018 to 2028(According to …
DIN Connectors- Market Overview
A DIN connector is a type of electronic connectors that are used for various applications. DIN connectors contains straight round pins, which are composed of a protective metal skirt. The DIN Connectors are used parimarily in the analog audio/video devices and for electrical connections. DIN connectors were also used in earlier PCs for mice and keyboards as plugs and sockets. Eventually, all DIN-Connector-based mice and keyboards were…
New ex-stock centenary catalogue from Lee Spring has more DIN-Plus springs – s …
Lee Spring’s new Centenary Catalogue issue 25 includes a full new section of DIN-Plus parts 2 and 1 compression springs. This extensive 525 series of new parts in end-closed passivated stainless steel wire, or end-squared and ground plated spring steel, provides manufacturers with a welcome resource for rapid delivery of standard parts, as well as a springboard for specification of custom units to suit those slightly different installations. DIN part…
