openPR Logo
Press release

GOEPEL electronic introduces the worldwide smallest JTAG/Boundary Scan Controller

02-22-2011 05:37 PM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

PicoTAP - worldwide smallest Boundary Scan controller

PicoTAP - worldwide smallest Boundary Scan controller

At “Southern Manufacturing & Electronics Exhibition” in Farnborough/UK, GOEPEL electronic introduced PicoTAP, the world’s smallest JTAG/Boundary Scan Controller with single TAP interface. The new and extremely handy solution has been designed for simple Boundary Scan test and programming tasks and for cost-critical applications throughout the entire product life cycle. If users want to upgrade their Boundary Scan applications at a later point in time, programs generated with PicoTAP are cross compatible to all controllers from GOEPEL electronics, such as the SCANBOOSTER series or the high-performance platform SCANFLEX®.

“The new low cost controller is our response to increasing customer requests to execute simple or non-time-critical test, debug and programming procedures with minimal equipment”, explains Stefan Meissner, GOEPEL electronic’s Public Relations Manager. “Furthermore, PicoTAP enables a fast introduction to the standardised test topic via IEEE 1149.x by keeping full compatibility to our existing hardware and software portfolio.”

The low cost JTAG/Boundary Scan Controller is controlled by a USB 2.0 interface and doesn’t require any additional voltage supply, making its utilisation very handy and efficient. PicoTAP provides a preconfigured plug-in TAP (Test Access Port), and therefore can be directly plugged to the assembly, i.e. additional cable adaption’s are omitted. PicoTAP gains further flexibility by a 5V auxiliary supply voltage switchable at the TAP interface.

GOEPEL electronic is a worldwide leading vendor of professional JTAG/Boundary Scan solutions and technology innovator of IP based instrumentation. With more than 100 product launches the company became the biggest innovator in the market within the last five years. A network of branch offices, distributors and service partners ensures the global availability of the products as well as the support of the more than 7,000 system installations. Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 170 employees and generated a revenue of more than 21 Million Euro in 2010 (ca. $16.5 Mio). GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the company and its products can be found on the internet at www.goepel.com.

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK

Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk

Stefan Meissner
press@goepel.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release GOEPEL electronic introduces the worldwide smallest JTAG/Boundary Scan Controller here

News-ID: 163567 • Views:

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Error Rate Tests
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases


More Releases for TAP

This Indian Startup is making your tap water healthier.
Eighty years ago, Dr. Otto Warburg was awarded the Nobel Prize for his thesis on illness management, which demonstrated that cancer is caused by oxygen deficiency and sugar fermentation. Cancer cells, he discovered, could not survive in an alkaline environment. This was such an intriguing and in-depth thesis that he was awarded the Nobel Prize. Almost 80 years later, drinking 9.5 ionized alkaline water with antioxidants has been found to
Clients Tap into Aqueduct Plumbing for Trusted Services
Brownsburg, IN: July 20, 2021 –A Brownsburg plumbing company is looking to maintain high standards after its customer-focused services and trustworthiness made it one of the most sought after locally. The family-run Aqueduct Plumbing team has built a reputation for honest, straightforward repairs and installations, with an unswerving dedication to professional and trusted services. The uniformed and licensed non-commissioned technicians are committed to ensuring domestic and corporate clients' plumbing problems are promptly
Ensuring a Smooth “Tap & Go” Experience
New COMPRION TraceCase helps to solve communication failures in contactless payments In all areas where NFC is applied, especially in contactless payments, failure in communication can lead to bad user acceptance. Ralph Kamp, Product Manager for NFC test solutions at COMPRION explicates: “Probably all of us have experienced this before: You are lining up at the checkout of your favorite coffee shop, wanting to pay your morning coffee quickly with a
United States Inductive Water Tap Market Report 2017
This report studies sales (consumption) of Inductive Water Tap in United States market, focuses on the top players, with sales, price, revenue and market share for each player, covering Request Sample Report: http://www.reportbazzar.com/request-sample/?pid=822795&ptitle=United+States+Inductive+Water+Tap+Market+Report+2017&req=Sample Jomoo Kohier Larsd Moen Vatti Submarine Market Segment by States, covering California Texas New York Florida Illinois Split by product types, with sales, revenue, price, market share and growth rate of each type, can be divided into Type I Type II Split by applications, this report focuses on sales, market share and growth rate of
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html “In the development
Staging Diva Explains How Introverts Tap into Creativity
(UNITED STATES) August 21, 2012 – Many home stagers are introverts according to home staging expert Debra Gould. On the Home Staging Business Report blog, Gould discusses the effect of introversion on creativity. “I’ve asked thousands of my home stager followers on Facebook and Twitter whether they consider themselves introverts or extroverts and found that most of us describe ourselves as introverts,” Gould writes. “We can certainly behave like extroverts when