openPR Logo
Press release

Cooperation between GOEPEL electronic and IPextreme accelerates Support of IEEE1149.7 (cJTAG)

09-15-2010 09:48 AM CET | Industry, Real Estate & Construction

Press release from: GOEPEL electronics Ltd.

GOEPEL electronic, globally leading vendor of JTAG/Boundary Scan solutions compliant with IEEE Standard 1149.x and IPextreme, a supplier of high-quality IP (Intellectual Property) for System-on-Chip (SoC) Design worldwide, have verified new instrumentations for the recently adopted debug and test standard IEEE 1149.7 within the frame work of a long-term cooperation. As a result, the total compatibility of GOEPEL electronic’s JTAG/Boundary Scan hardware platform SCANFLEX® with the IPextreme’s IEEE 1149.7 JTAG semiconductor has been assured.

“We see the IEEE Standard 1149.7 as one of the strategically most important test and debug standards of the future. Thanks to the excellent cooperation with IPextreme, a vendor of reference IP, we were able to quickly and effectively implement the respective support into our SCANFLEX® platform”, says Thomas Wenzel, Managing Director of the Boundary Scan division of the GOEPEL electronic GmbH. “Perspectively, this partnership is not only to guarantee a compatibility of IP and instrumentation hardware but to promote the industrial utilisation of IEEE 1149.7 as the access interface for embedded test and debugging of the next generation devices.”

“We are continuing our effort with our partners to enrich the ecosystem around the IEEE-1149.7 standard”, says Pierre-Xavier Thomas, VP of Engineering at IPextreme. “We are very pleased with our recent partnership with GOEPEL electronic, which allowed the validation of the compatibility of the latest release of GOEPEL electronic’s JTAG/Boundary Scan SCANFLEX® product with IEEE1149.7 protocol using the CJTAG IEEE 1149.7 semiconductor IP core available from IPextreme. We feel our effort with GOEPEL electronic will continue the momentum of IEEE1149.7 adoption and benefit IPextreme’s customers.”

“As Texas Instruments led the development of IEEE1149.7 and we are pleased to see the growing support on the tool side by vendors”, said Stephen Lau, product manager for emulation technology at Texas Instruments. “The emerging eco system of Instruments and IP's will help to expedite the adoption of IEEE1149.7 as the next generation test and debug standard in the industry.”

About IPextreme:
IPextreme packages, delivers, and supports famous IP designed by large semiconductor companies and used by SoC designers worldwide. These production-proven IP products serve both broad horizontal markets and specific verticals such as consumer and automotive, and are provided in a process-independent and EDA-neutral format for easy use by the widest range of customers. With a decade of experience in developing, packaging, licensing, and supporting IP, IPextreme offers a complete business solution that allows semiconductor companies to strategically leverage their internal IP portfolios and expand overall revenue. The company has offices in Campbell, California; Munich, Germany; and Tokyo, Japan with representatives in China, India, Israel, Korea and Taiwan. For additional information, please visit www.ip-extreme.com.

About GOEPEL electronic:
GOEPEL electronic is a worldwide leading vendor of professional JTAG/Boundary Scan solutions and technology innovator of IP based instrumentation. With more than 100 product launches the company became the biggest innovator in the market within the last five years. A network of branch offices, distributors and service partners ensures the global availability of the products as well as the support of the more than 7,000 system installations. Founded 1991 and headquartered in Jena, Germany, GOEPEL electronic employs currently about 160 employees and generated a revenue of 17.9 Million Euro in 2009. GOEPEL electronic has continuously been ISO9001 certified since 1996 and has been honoured with TOP-JOB and TOP-100 awards for being one of the best medium-sized companies in Germany. GOEPEL electronic’s products won several awards in recent years and are used by the leading companies in telecommunication, automotive, space and avionics, industrial controls, medical technology, and other industries. Further information about the company and its products can be found on the internet at www.goepel.com.

About IEEE1149.7:
The new standard IEEE1149.7 is a complementing superset to IEEE1149.1, and was ratified in December 2009. It combines the benefits of a 2-wire interface with the new features for controlling the power consumption as well as for advanced test and debugging of multi-core and multi-processor systems. More detailed information is available online at http://grouper.ieee.org/groups/1149/7/.

GOEPEL electronics Ltd.
Unit 1A
The Old Granary
Westwick, Cambridge
CB24 3AR/UK

Phone +44-1223-858298
Fax +44-1223-257800
www.goepel.co.uk

Stefan Meissner
press@goepel.com

www.goepel.com
www.goepel.com/twitter
www.goepel.com/youtube
www.goepel.com/linkedin
www.goepel.com/xing

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Cooperation between GOEPEL electronic and IPextreme accelerates Support of IEEE1149.7 (cJTAG) here

News-ID: 144576 • Views:

More Releases from GOEPEL electronics Ltd.

G-TAP – versatile Contacting Solution for Assembly Test
G-TAP – versatile Contacting Solution for Assembly Test
GOEPEL electronic introduces G-TAP, a worldwide unique solution for the versatile contacting of electronic assemblies - in particular the JTAG bus - for testing and programming. The G-TAP is not a single product but an overall concept, because the module can be utilized in stand-alone operations as well as an integrated solution in existing electronic and optical test systems such as Flying Probers, In-Circuit Test or AOI systems. http://www.goepel.com/en/news/newsdetails/article/2012/11/15/g-tap-versatile-contacting-solution-for-assembly-test-from-goepel-electronic.html “In the development
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Error Rate Tests
GOEPEL electronic demonstrates first ChipVORX Prototype Instruments for Bit Erro …
At the International Test Conference (ITC) GOEPEL electronic introduces the first ChipVORX® model prototype to execute Bit Error Rate Tests (BERT) using on-board Field Programmable Gate Arrays (FPGA). http://www.goepel.com/en/news/newsdetails/article/2012/11/08/goepel-electronic-demonstrates-first-chipvorx-prototype-instruments-for-bit-error-rate-tests.html The new solution enables the utilisation of FPGA Embedded Instruments in the form of special softcores for the test and design validation of high-speed I/O. This will allow users to evaluate the quality of interconnections by way of bit error rates and also
New Inline Programming System combined with Embedded Test
New Inline Programming System combined with Embedded Test
GOEPEL electronic announced the market introduction of additional RAPIDO™ series inline production systems for high-speed programming as well as board test based on the newest Embedded System Access (ESA) technologies. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/new-inline-programming-system-combined-with-embedded-test.html The new models named RPS3000-(x) support double-sided probing for up to 3000 nails. Non-volatile memories such as Flash, Microcontrollers (MCU) and Programmable Logic Devices (PLD) can be on-board programmed even faster and more reliably. Based on an enhanced SCANFLEX® architecture with
Parallel Inline AOI for THT Components and THT Solder Joints in one System
Parallel Inline AOI for THT Components and THT Solder Joints in one System
GOEPEL electronic presents the world debut for the automatic inspection of THT assemblies: the multi awarded OptiCon THT-Line AOI system now provides a parallel inspection of THT components and THT solder joints. In a typical THT production line, now it is possible to inspect mounted components before the soldering processes as well as PCB solder joints during the return transport. http://www.goepel.com/en/news/newsdetails/article/2012/11/13/parallel-inline-aoi-for-tht-components-and-tht-solder-joints-in-one-system.html This gain in effectiveness for users is enabled by the OptiCon

All 5 Releases


More Releases for IEEE

Perle Closes KRACK IEEE 802.11 Security Standard Vulnerability
NASHVILLE, November 22nd, 2017 — Perle Systems, a global manufacturer of secure device networking hardware, has released new firmware for the IOLAN SDS W Secure Wireless Device Server to patch the recently disclosed vulnerability found in WPA2. Serious weaknesses were recently discovered in the WPA2 protocol standard, which secures all modern protected WiFi networks. Using Key Reinstallation attaCKs (KRACK), it is possible for an attacker to harvest sensitive information being transmitted
Optical Gigabit Ethernet Becomes IEEE Standard
KDPOF Welcomes New IEEE 802.3bv(TM) Specification for Robust and Reliable Optical Data Transmission in Automotive Applications KDPOF – leading supplier for automotive gigabit connectivity over POF (Plastic Optical Fiber) – welcomes IEEE's publication of the new standard amendment for 1000 Mb/s Ethernet operation over plastic optical fiber. As an amendment to the IEEE 802.3™ standard, IEEE Std 802.3bv(TM) for gigabit Ethernet over POF defines physical layer specifications and management parameters for
IEEE 1588 protocol software with new features for the telecommunication sector
The IEEE 1588 protocol software from IXXAT enables networking devices with accurate and reliable time synchronization for automation, automotive, measurement and telecommunication applications. Depending on the microcontroller system and the type of network employed, IXXAT’s IEEE 1588-2008 PTP software is able to attain time synchronization accuracy in the nanosecond range. The new version 1.05 now supports the basic requirements of the ITU-T G.8265.1 telecom specification for "Packet Timing Signal Fail Mechanism",
GÖPEL electronic demonstrates IJTAG (IEEE P1687) support in SYSTEM CASCON
At International Test Conference (ITC) 2011 in Anaheim, CA, GÖPEL electronic demonstrates a prototype version of the company’s JTAG / boundary-scan software platform SYSTEM CASCON™ with integrated tools supporting the current version of the upcoming IEEE P1687 (IJTAG) standard. IEEE P1687 focuses on the standardization of the access to and the documentation of the control of chip-embedded instruments, without limiting the number or type of instruments. Compatible test systems allow
IEEE Introduces Advanced Metering Standards for the first time in India
Chennai, September 12, 2011: IEEE Standards Association (IEEE-SA), a globally recognized standards setting body within IEEE, today officially introduced two new standards IEEE 1701TM and IEEE 1702TM, to create a multi source plug and play communications environment for implementation of diverse smart metering devices, for the first time in India. While deployment of smart Meters and Advanced Metering Infrastructure (AMI) has been recognized as an important steps towards Smart
LayerZero Co-Founder Jim Galm Elevated To Senior IEEE Member Grade
Jim Galm, Vice President and Chief Technical Officer of LayerZero Power Systems, Inc., has been selected as a Senior Institute of Electrical and Electronics Engineers (IEEE) member. The grade of Senior Member requires experience reflecting professional maturity and significant professional achievements. Jim Galm has contributed towards significant discoveries and advancements in the power distribution industry, having authored numerous patents, including LayerZero’s Dynamic Phase Compensation Technology. Jim Galm