openPR Logo
Press release

Green Tech: Special Lamps Save Energy

03-31-2010 11:39 AM CET | Industry, Real Estate & Construction

Press release from: Heraeus Noblelight

IR heaters, UV lamps or UV LEDs are curing digital printings

IR heaters, UV lamps or UV LEDs are curing digital printings

Labels, forms, cards and lottery and raffle tickets are personalised by ink jet or laser printers. These inks must be completely dried or cured before the printed sheets are passed on for subsequent operations such as stacking, cutting, folding or gluing. Depending on the type of ink used, UV or IR emitters are used for drying and curing and this inevitably takes place with some energy consumption. Today, it is well worth the effort to examine these processes scrupulously and find techniques which offer the best results at the greatest possible energy efficiency. At the IPEX exhibition in Birmingham, Heraeus Noblelight is showcasing emitters which can be matched precisely to the properties if the relevant coating system.

Infrared Emitters Improve Energy Efficiency
The Alito Color Group of Leyton, London achieved significant benefits through one simple change: They replaced their existing drier, which was fitted with near infrared (NIR), short wave emitters, with a Heraeus Carbon Infra-red (CIR) System. Carbon Infrared (CIR) emitters from Heraeus Noblelight are especially efficient at drying inkjet inks. This is due to the medium wave infrared radiation, which the carbon emitters transfer into the inks at high power. Medium wave infrared radiation is absorbed extremely well by water-based inks. Carbon emitters combine high power and fast response times with the effective medium wavelengths.
Following successful tests, two carbon infra-red (CIR) were fitted in the existing drier frame. Each 24kW module matches a special 4¼ inch print head. As a result, it is now possible to realise the complete capability of the high speed print heads. Practical usage has shown that the print quality can be maintained even at the high print speeds. In addition, the new emitters require less energy than before and have a significantly longer operating life. This has greatly improved the machine energy efficiency.

UV Lamps with Intelligent Energy Supply
The emission spectrum of UV radiation is very important for the curing process. It must cause as many photons as possible to react with the coating, on one hand to cure the material completely and on the other to bind the coating with the substrate. Consequently, every curing process is complex and each coating system specifies its own individual curing parameters.
Some applications demand special testing and development work, such as processes which require a very high coating density with many pigments or inks. The chemistry of these coating systems requires longer wavelengths so that they can react with the UV light.
In addition, other special applications require light at wavelengths which are different from those emitted by the standard mercury spectrum. This is achieved by the use of metal halide additives in the lamps and when the lamp is operated, the metal halides evaporate. Consequently, their additional spectra are emitted so that the curing process can be significantly improved.
The majority of applications today use a conventional medium pressure mercury lamp which operates at the industrial standard of 120 W/cm. There was a demand for a reliable lamp with a long operating life and a good output throughout this life. Both these factors were important because today a lamp in a typical system needs to run for up to 3000 hours at a consistently good process speed.
This has been made possible through close collaboration with OEM partners, advances in lamp production have been best realised with the aid of intelligent energy supply and the development of cooling systems.
Controlled lamp cooling has allowed higher operating output power. The power was so chosen that not only can the curing take place but also the lamp can be held in standby at very much lower power than was possible previously. Considerable savings can be made. Some processes need specially developed lamps, such as small lamps (50mm arc length) and miniature lamps (15mm arc length). These are used in digital printing, where the lamp, together with the print head, travels over the surface of the print.

UV-LEDs – small, flexible and energy-saving.
With digital printing, where the lamp, together with the print head, moves over the surface of the print, every little saving in weight and size matters. Here, UV-LEDs are the innovation for the future. Their extremely small shape allows great flexibility in styling. UV-LEDs from Heraeus Noblelight are matched to the machine environment according to customer specifications. The individual components to meet the specifications are assembled from a modular construction system. As a result, even special solutions can be built. The package also includes all the associated peripheral components such as cooling, control and power supply.
An important factor governing the operating life of a UV-LED is the fact that all components belonging to the system are harmonically matched to each other. Thermal management plays the most important role in this.
The LED special light sources help to save energy. Because they instantly switch on and off, energy is consumed only on demand, when it is needed, without impairment of the performance of the LEDs. LED technology stands for “solid state lighting”, a robust, solid and above all resilient technology.
The new “Optoelectronics” business division of Heraeus Noblelight GmbH profits from the core competence of the Heraeus Organisation in the manufacture of UV-LED modules and systems. In a complete development and production line, LED chips are processed in so-called “chip-on-board” technology and measured and tested in our in-house, accredited measurement laboratory. As a result, customer-specific system solutions can assembled and offered to meet special requirements.

Heraeus Noblelight offers the complete palette of special emitters for printing ink curing from UV to IR, carries out tests with relevant materials and advises on the optimum selection of emitters to suit particular processes.
Heraeus has more than 40 years experience with special emitters, working both with end customers and with OEMs and carries out practical tests with customer own materials in its own application centres to establish optimal and customer specific process solutions

Heraeus Noblelight GmbH with its headquarters in Hanau and with subsidiaries in the USA, Great Britain, France, China, Australia and Puerto Rico, is one of the technology and market leaders in the production of specialty light sources. In 2008, Heraeus Noblelight had an annual turnover of 92.5 Million € and employed 735 people worldwide. The organisation develops, manufactures and markets infrared and ultraviolet emitters for applications in industrial manufacture, environmental protection, medicine and cosmetics, research, development and analytical laboratories.
Heraeus, the precious metals and technology group headquartered in Hanau, Germany, is a global, private company with over 155 years of tradition. Our businesses include precious metals, sensors, dental products, biomaterials, quartz glass, and specialty lighting sources. With product revenues approaching € 3 billion and precious metal trading revenues of € 13 billion, as well as over 13,000 employees in more than 110 companies worldwide, Heraeus holds a leading position in its global markets.

Heraeus Noblelight
Heraeusstraße 12-14
D-63450 Hanau
Press: Dr. Marie-Luise Bopp
marie-luise.bopp@heraeus.com
www.heraeus-noblelight.com

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Green Tech: Special Lamps Save Energy here

News-ID: 125407 • Views: 1227

More Releases from Heraeus Noblelight

Infrared Heating helps to ensure quality in the manufacture of composite structu …
An infrared heating system from Heraeus Noblelight is helping to ensure the high quality of composite aerospace structures manufactured at the new GKN Aerospace facility at Western Approach, near Bristol. The system, which is used to provide interim processing of the laid-up composite rear spar assembly of the Airbus 350 XWB to prevent subsequent wrinkling, was custom-designed and developed in close co-operation with GKN Aerospace engineers following initial tests at
Seven Good Reasons for the D2plus Light module
Heraeus Noblelight, one of the technology and market leaders in the field of specialty light sources will again exhibit at ANALYTICA, to be held in Munich, Germany in April 2012. Heraeus will introduce its “Seven Good Reasons for D2plus Light modules” at the show, making the life of instrument developers easier. Developing new analytical instruments places ever-increasing demands on engineers, to design-in the best available light-source and avoid future operational problems.
Specialty Light Sources for the Printing Industry
Hanau, February 2012 The Competence in Specialty Light Sources for printing systems Special and personalized printing processes need special treatment. The ink of ink jet or laser printers need to be completely dried or cured before the printed sheets are passed on for subsequent operations such as stacking, cutting, folding or gluing. Infrared or UV technology is used for drying and curing, depending on the type of ink. Heraeus Noblelight presents its
Infrared Emitters Improve Lacquered Surfaces
Many screens, internal claddings in cars and high value cosmetic packages are manufactured from plastics and contain a protective lacquer or finishing. The drying of the coating on the plastic components is not a trivial matter, for the surfaces need to be perfectly cured without applying to much heat to the plastic. Infrared heaters transfer energy in a contact-free manner and are easy to control. Consequently, the heat is precisely

All 5 Releases


More Releases for LED

Global LED Packaging Market Size Detail Analysis focusing Market Segmentation li …
Global LED Packaging Market Size Detail Analysis focusing Market Segmentation like Lamp-LED, Side-LED, TOP-LED, High-Power LED, SMD-LED, and Flip-Chip LED & more The LED market is one of the quickly growing segments as they are replacing the traditional lighting equipment like bulbs due to their high efficiency and power saving capability. The LED packaging industry is also growing with innovations along with the LED industry as new technologies are being included
Global LED Driver (LED Lighting Driver) Market Research Report
This report studies the global LED Driver (LED Lighting Driver) market status and forecast, categorizes the global LED Driver (LED Lighting Driver) market size (value & volume) by manufacturers, type, application, and region. This report focuses on the top manufacturers in United States, Europe, China, Japan, South Korea and Taiwan and other regions. Get sample copy of the report: https://www.marketdensity.com/contact?ref=Sample&reportid=68754 Table of Contents: Table of Contents Global LED Driver (LED Lighting Driver) Market Research Report
Global LED Packaging Market
Global LED Packaging Market is expected to reach US$ 34.29 Bn by 2026 from US$ 18.2 Bn in 2016 at a CAGR of 6.54%. The factors such as increasing demand for high power grade LED packages for lighting applications, rising demand for LED packages in the display panel market, growing government initiatives and regulations for adoption of energy-efficient LED lighting and increasing demand for smart LED lighting solutions are responsible
LED Lighting Optics Market
“Global LED Lighting Optics Market Insights, Forecast to 2025” This report researches the worldwide LED Lighting Optics Market size (value, capacity, production and consumption) in key regions like North America, Europe, Asia Pacific (China, Japan) and other regions. The report provides a unique tool for evaluating the Market, highlighting opportunities, and supporting strategies. This report recognizes that in this rapidly-evolving and competitive environment, up-to-date Marketing information is essential to monitor
LED Services Market - Energy Efficiency of LED Lighting Boosts Uptake
The world LED services market is projected to be highly competitive with many crucial market players vying to withstand the market competition with innovative product offerings and by improving the functionality of their already existing products. Sponsorship of industry events and various long term lighting contracts are some of the significant growth strategies for the success of this market. One of the significant growth promoting elements of the world market for
Global Led Writing Board
Global Led Writing Board: Led Writing Board Report by Material, Application, and Geography – Global Forecast to 2021 is a professional and in-depth research report on the world's major regional market conditions, focusing on the main regions (North America, Europe and Asia-Pacific) and the main countries (United States, Germany, united Kingdom, Japan, South Korea and China). For sample report: http://www.reporthive.com/request-sample.php?id=809563 The report firstly introduced the Led Writing Board basics: definitions, classifications, applications and