openPR Logo
Press release

Functional coatings need infrared heat

03-03-2010 09:41 AM CET | Industry, Real Estate & Construction

Press release from: Heraeus Noblelight

Infrared heat dries protective coating on roof tiles

Infrared heat dries protective coating on roof tiles

Water drips off shower walls, roof tiles repel dirt, facades stay glossy, frequently, all this is the work of coatings with functional properties. For building facades or roofs a dirt-repellant coating is very practical, in healthcare it helps to keep rooms cleaner and perfectly hygienic. With ships and aircraft, the repellent effect can save energy and can even be of vital importance. Algae or shellfish which cling to ships, significantly affect propulsion and ice crystals on aircraft are a safety risk.
Coatings with functional properties, many of which are nano coatings, are also used on machine and engine parts such as linkage shafts of ships’ propulsion systems, which are exposed to salt water or other unfavorable weather influences.
However, all protective coatings must be applied and dried very homogenously so that their functional property is effective evenly and reliably over the complete component.
This means that the coating must be sprayed on in very thin layers, which are then dried quickly without destroying the special properties of the coating. Infrared emitters transfer heat efficiently without contact, with the aid of electromagnetic waves, which generate the heat primarily in the material. As a result, the adhesion of disruptive particles in the sensitive coating during drying is minimized.
Infrared emitters offer very fast reaction times. Shortwave and Carbon emitters from Heraeus react within one to three seconds. This ensures that heating is controllable and, combined with temperature control, helps to eliminate overheating of materials.
Rapid change-over of different types of coating having different burn-in temperatures are possible. And it also saves energy when the heat source needs to be switched on only when it is needed.
Heraeus Noblelight offers the spectrum of infrared heat from near infrared (NIR) to medium wave carbon infrared CIR, carries out tests with the materials in question and advises on the selection of the optimum emitters for the specific process.
Heraeus has more than 40 years experience with infrared emitters, both for end-users and for large OEMs and carries out practical tests with customer own materials in its own application centres to establish optimum process solutions

Heraeus Noblelight GmbH with its headquarters in Hanau and with subsidiaries in the USA, Great Britain, France, China, Australia and Puerto Rico, is one of the technology and market leaders in the production of speciality light sources. In 2008, Heraeus Noblelight had an annual turnover of 92.5 Million € and employed 735 people worldwide. The organisation develops, manufactures and markets infrared and ultraviolet emitters for applications in industrial manufacture, environmental protection, medicine and cosmetics, research, development and analytical laboratories.
Heraeus, the precious metals and technology group headquartered in Hanau, Germany, is a global, private company with over 155 years of tradition. Our businesses include precious metals, sensors, dental and medical products, quartz glass, and specialty lighting sources. With product revenues approaching € 3 billion and precious metal trading revenues of € 13 billion, as well as over 13,000 employees in more than 110 companies worldwide, Heraeus holds a leading position in its global markets.

Heraeus Noblelight GmbH
Reinhard-Heraeus-Ring 7
D-63801 Kleinostheim
Press: Dr. Marie-Luise Bopp
marie-luise.bopp@heraeus.com
www.heraeus-noblelight.com/infrared

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Functional coatings need infrared heat here

News-ID: 122435 • Views: 1002

More Releases from Heraeus Noblelight

Infrared Heating helps to ensure quality in the manufacture of composite structu …
An infrared heating system from Heraeus Noblelight is helping to ensure the high quality of composite aerospace structures manufactured at the new GKN Aerospace facility at Western Approach, near Bristol. The system, which is used to provide interim processing of the laid-up composite rear spar assembly of the Airbus 350 XWB to prevent subsequent wrinkling, was custom-designed and developed in close co-operation with GKN Aerospace engineers following initial tests at
Seven Good Reasons for the D2plus Light module
Heraeus Noblelight, one of the technology and market leaders in the field of specialty light sources will again exhibit at ANALYTICA, to be held in Munich, Germany in April 2012. Heraeus will introduce its “Seven Good Reasons for D2plus Light modules” at the show, making the life of instrument developers easier. Developing new analytical instruments places ever-increasing demands on engineers, to design-in the best available light-source and avoid future operational problems.
Specialty Light Sources for the Printing Industry
Hanau, February 2012 The Competence in Specialty Light Sources for printing systems Special and personalized printing processes need special treatment. The ink of ink jet or laser printers need to be completely dried or cured before the printed sheets are passed on for subsequent operations such as stacking, cutting, folding or gluing. Infrared or UV technology is used for drying and curing, depending on the type of ink. Heraeus Noblelight presents its
Infrared Emitters Improve Lacquered Surfaces
Many screens, internal claddings in cars and high value cosmetic packages are manufactured from plastics and contain a protective lacquer or finishing. The drying of the coating on the plastic components is not a trivial matter, for the surfaces need to be perfectly cured without applying to much heat to the plastic. Infrared heaters transfer energy in a contact-free manner and are easy to control. Consequently, the heat is precisely

All 5 Releases


More Releases for Infrared

Infrared Imaging Market Report 2018: Segmentation by Technology (Cooled Infrared …
Global Infrared Imaging market research report provides company profile for FLIR Systems (US), Fluke (US), Sensors Unlimited (US), Leonardo DRS (US), Axis Communications (Sweden), Xenics (Belgium), Sofradir (France) and Others. This market study includes data about consumer perspective, comprehensive analysis, statistics, market share, company performances (Stocks), historical analysis 2012 to 2017, market forecast 2018 to 2025 in terms of volume, revenue, YOY growth rate, and CAGR for the year 2018
Uncooled Infrared Imaging Technology Market
Uncooled infrared imaging technology involves thermal imaging, thermal video, and infrared thermography. It is used for image detection and measurement of patterns of thermal radiation emitted by objects. A thermo graphic camera generally detects radiation of the lengthy infrared range in an electromagnetic spectrum, and produces radiation images called thermo grams. It is used for measuring infrared radiations forming images utilizing visible light. These cameras using the uncooled technology work
Global Near-infrared Spectroscopy Market
Near-infrared spectroscopy (NIRS) is a technique used for the imaging purpose in different branches of science such as clinical medicine, emergency medicine and other areas of in institutes and laboratories where it gives sufficient information about the structure of a compound and measure the oxygenation status of human tissue non-invasively. Recently, near infrared spectroscopy has become an important technique process of analysis in the pharmaceutical industry for quality control and
Carbon Infrared Emitters Improve Quality
Foils for foodstuffs or heavy duty floor coverings – modern plastic materials need heat during processing. Coatings or adhesives are dried and plastic foils are pre-treated by heat before embossing or lamination. Carbon infrared emitters from Heraeus Noblelight are helping Polyflor from Manchester in the embossing of heavy duty floor coverings and improving quality. Infrared systems heat large, flat materials rapidly and homogenously, directly before the press or the embossing station.
Infrared Heat for medical technology
Infrared technology has been used for many years in the industrial manufacturing sector. It is relatively recently that this technology has been used in medical technology. However, for some time, infrared emitters have been used directly used to heat tissue before liposuction and they help to remove wrinkles. Infrared emitters are used indirectly in processing medical goods, such as drying granulates, vulcanising tubes or activating adhesives on plasters. Infrared emitters from
Infrared Heating improves Quality
If burrs on cast plastic components cannot be completely eliminated, they must at least be simply removed using a repeatable process. Heraeus Noblelight, a company within the Heraeus worldwide precious metals- and technology organisation, offers infrared emitters which can be matched to component contours. The emitters transfer heat in a contact-free manner and melt the burrs away without causing any damage to the component itself. As a result production reject