openPR Logo

Press Releases from Precise Simulation - FEATool Multiphysics (15 total)

FEATool Multiphysics v1.15 - CFD Simulation of Non-Newtonian Flows Made Easy

The FEATool Multiphysics toolbox version 1.15 is now available, introducing a new CFD mode to make it easy to set up and simulate non-Newtonian flows. Pre-defined viscosity models for shear thinning and shear thickening power law, Cross power law, and Bird-Carreau type of flow behaviors are fully supported. Moreover, users can also easily define their own custom shear rate dependent viscosity using the convenient equation syntax, just like writing equations

FEATool Multiphysics v1.14 Released with parallel support for the OpenFOAM, SU2 …

The updated FEATool Multiphysics and CFDTool toolboxes are now available featuring built-in parallel processing support for the FEniCS FEA, and OpenFOAM and SU2 CFD solvers. Complexities of setting up parallel is now essentially completely automated with FEATool and CFDTool. The toolboxes automatically subdivides the meshes, defines and sets up parallel case files, solves, and recombines the solutions completely seamlessly so that users can get the benefits of parallelization without every having

FEATool Multiphysics Simulation Platform v1.13 Available

Version 1.13 of the FEATool Multiphysics multi-solver simulation platform is now available and has been updated with a complete suite of CAD geometry and modeling tools, making the FEATool simulation platform a one-stop-shop for all types of physics and engineering simulations. The unique Multi-solver feature of FEATool Multiphysics allows users to quickly set up and run physics simulations with any one of the OpenFOAM, FEniCS, SU2, and built-in multiphysics, FEA, and

FEATool Multiphysics v1.12.1 Released with FEniCS GUI Integration

FEATool Multiphysics ( has now been updated to version 1.12.1 with significant improvements to the multi-solver simulation interfaces. In addition to supporting the built-in MATLAB multiphysics solver, and the computational fluid dynamics (CFD) solvers OpenFOAM and SU2, FEATool now also includes full support for the popular open source FEA solver FEniCS. The unique multi-simulation feature of FEATool Multiphysics allows one to easily define complex multiphysics models, and use up to four

FEATool Multiphysics version 1.12 released

FEATool Multiphysics version 1.12 introduces a dedicated built-in solver interface for the SU2 Computational Fluid Dynamics (CFD) solver, updated 3D geometry modeling engine and CAD support, and improved 3D mesh generation. Precise Simulation, provider of unique software solutions for multi-physics and multi-simulation, modeling, and CAE simulation app design, announces the latest version of its FEATool Multiphysics software suite. In addition to the existing solver integrations for OpenFOAM, FEniCS, and FEATool and MATLAB,

Fluid-Structure Interaction (FSI) Made Easy with FEATool Multiphysics 1.11

FEATool Multiphysics version 1.11 is now available and extends the multi-simulation solver concept even further by introducing a fluid-structure interaction (FSI) solver (in addition to the existing built-in multiphysics, OpenFOAM, and FEniCS solver integrations). In addition, the 3D geometry engine has been updated with support for the OpenCASCADE and BRL-CAD open source CSG geometry engines, as well as new built-in geometry primitives for more complex geometries. FEATool Multiphysics 1.11 also features: - More

FEATool Multiphysics Physics Simulation Toolbox v1.10 Released

The FEATool Multiphysics MATLAB FEA simulation toolbox version 1.10 has been made available by Precise Simulation Ltd. With FEATool 1.10 physics modeling and simulation is now easier than ever to learn, featuring an updated GUI with built-in and automated step-by-step multiphysics modeling examples and tutorials. In addition the new postprocessing mode includes one-click integration with ParaView Glance and plotly web based visualization, enabling quick and convenient export and sharing of fully

FEATool Multiphysics MATLAB CAE Simulation Toolbox 1.9 Released

FEATool Multiphysics version 1.9 has now been updated and released as a dedicated MATLAB Add-On and self-contained Toolbox. Available directly from the MATLAB Add-Ons Toolbar, FEATool now features easy and convenient one-click installation and Toolbox accessibility. # Improved OpenFOAM GUI Introduced with FEATool 1.8, the OpenFOAM CFD solver interface has been significantly enhanced and improved with the following enhancements - Support for non-constant and general initial and boundary condition expressions (automatic

CFDTool, MATLAB CFD Toolbox with OpenFOAM GUI Integration

The easy to use MATLAB® CFD Toolbox, CFDTool™, has been updated to version 1.3, and improved with an OpenFOAM CFD Solver integration, support for compressible flows, and many solver and meshing improvements. Based on the FEATool Multiphysics (™ codebase the MATLAB CFD Toolbox, CFDTool, has been specifically designed and developed to make simple fluid dynamics and heat transfer simulations both easy and fun for everyone. Setting up and making MATLAB CFD simulations

OpenFOAM MATLAB GUI with CFDTool 1.2

CFDTool has been upgraded with built-in and completely seamless OpenFOAM GUI integration. This allows setting up and running, both laminar and turbulent OpenFOAM CFD simulations all within an easy and convenient GUI directly in MATLAB. With CFDTool, OpenFOAM case file generation steps such as - automatic mesh generation, conversion, and extraction of 2D/axi-symmetric grids - handles both constants and general expressions as boundary conditions (for example for parabolic inflow profiles) - calculation of

CFDTool - MATLAB CFD Toolbox - Version 1.1 is now available

The new release now improved and faster solvers including coupled flow and heat transfer modeling in 1D, 2D, and axisymmetry/cylindrical coordinates with swirl flow effects. The automatic mesh generation is now also more efficient and features boundary layer meshing. Moreover, CAD and geometry import is supported for STL files in addition to mesh import from several formats. Postprocessing capabilities has also been updated to support boundary and subdomain integration for

CFDTool - MATLAB CFD Toolbox Available

Announcing CFDTool™ v1.0, a dedicated #MATLAB Computational Fluid Dynamics #CFD Toolbox for modeling and simulation of fluid flows with coupled heat transfer. Based on FEATool Multiphysics™ ( by Precise Simulation, CFDTool is specifically designed to make light and simple fluid dynamics and heat transfer simulations both easy and fun. Setting up and performing CFD simulations in MATLAB has never been this easy. The CFDTool MATLAB Toolbox includes the following features: - completely stand-alone

Multi-Simulation and External CAE Solver Interfaces with FEATool Multiphysics

Multi-Simulation and Direct CFD Solver Comparison of OpenFOAM, FEniCS, and FEATool Multiphysics The FEATool Multiphysics ( external solver and multi-simulation interface makes it easy to use different CAE and physics simulation solvers. By only setting up a model once in FEATool one can save significant amounts of time and effort to run several solvers for the same test case. At the same time FEATool eliminates the need for learning how to

FEATool Multiphysics 1.8 with OpenFOAM MATLAB GUI and CFD Solver Interface

The FEATool Multiphysics MATLAB and Octave FEM Simulation Toolbox version 1.8 is now available. In addition to being a fully integrated FEA multiphysics toolbox, and interfacing with the FEniCS FEM solver and external mesh generators such as DistMesh, GiD, Gmsh, and Triangle, the highlight of the new version is introducing a fully integrated and cross-platform OpenFOAM CFD GUI interface for MATLAB and GNU Octave. The new OpenFOAM MATLAB CFD interface allows

FEATool Multiphysics v1.7 Released - Matlab Multi-Simulation FEM Toolbox

Precise Simulation Ltd. developer of the Matlab and Octave Finite Element Multiphysics Toolbox FEATool (, has now released FEATool Version 1.7 which introduces the modeling and simulation tool concept Multi-Simulation. Multi-Simulation allows for seamless switching between both built-in and external solvers and simulation tools. Starting with FEATool 1.7, Multi-Simulation supports the the FeatFlow high performance computational fluid dynamics CFD and FEniCS multiphysics solvers, as well as the visualization and postprocessing

Go To Page:   1 2 3 4 5 6 7 8 9 10