Wheel drive components for all repairs
At the beginning of the year, OPTIMAL is adding drive shafts, CV joints and bellow sets to its product range. The wheel drive components can be purchased individually or as a complete, ready to install kit. The high flexibility of the new product group is additionally emphasised by the use of different types of bellows. Depending on requirements, there can be chosen between rubber or plastic bellows made from TPE.
Use and application:
Drive shafts, CV joints and the related bellow sets are typical wear parts. To prevent water and dirt from damaging the joints, they are sealed with suitable bellow sets made from rubber or plastic. For uninterrupted driving pleasure, the bellow sets in particular should be regularly checked and replaced as necessary.
Quality, flexibility, no service exchange parts:
Whether fully installed drive shafts, repair kits for CV joints or bellow sets: the new drive components from OPTIMAL meet the most stringent requirements (OEM quality) in engineering and production as well as through the use of high-performance lubricants. Depending on requirements, OPTIMAL also offers both conventional rubber as well as thermoplastic (TPE) bellows, which exhibit much greater temperature resistance and impact resistance as well as better inherent stability, thanks to their specific material properties. TPE axle boots are being used in more and more applications, especially in modern vehicles, and need stronger stainless steel clamps due to their greater material stiffness.
All wheel drive components from OPTIMAL are supplied individually packaged for protection and with accessories. All parts are new. No service exchange.
All benefits at a glance:
• Fully assembled drive shafts
• Joint types compliant to OEM design
• Complete kits with all associated fixings
• Bellow sets available in thermoplastic and rubber versions
• All components meet the quality requirements for original equipment parts in accordance with TS 16949
• Low friction through use of high-performance lubricant
• New material! No service exchange parts!
• Use of high-quality stainless steel clamps
• Easy identification of parts (TecDoc, DVSE, etc.)
• Over 90% of the axle boot and joint kits are always available in stock
• Excellent delivery service
• Very wide market coverage
About OPTIMAL AG & Co. KG:
OPTIMAL AG & Co. KG has been producing and selling high-quality spare car parts for more than 25 years. The company’s products range from wheel bearing kits, steering and suspension parts, shock absorbers, and brake systems to rubber-metal parts, water pumps, and belt tensioner kits. Driven by passion and enthusiasm, the company has always regarded its employees as its main asset. At OPTIMAL, cooperating fairly with business partners and using resources carefully are equally as important as providing high-quality products and an outstanding service.
With the widest range of wheel bearing kits, TÜV-certified steering and suspension parts, and completely pre-assembled suspension struts, OPTIMAL AG & Co. KG is the number one provider of these products. OPTIMAL’s parts are sourced from international production partners, original equipment manufacturers, and quality suppliers. Our fully automated warehouse enables parts to be delivered quickly and on time.
All products comply with European and international standards for the aftermarket, such as the manufacturing and quality standards TS 16949, QS 9000, and ISO 9001:2015.
OPTIMAL AG & Co. KG
Social Media-Manager / Marketing Manager
phone: +49 (0) 8761-7206-192
fax: +49 (0) 8761-7206-492
This release was published on openPR.
Permanent link to this press release:
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Wheel drive components for all repairs here
News-ID: 912824 • Views: 901
More Releases from OPTIMAL AG & Co. KG
Quality brake discs and pads with a high standard
High-quality range of brake products completely revised and respecified. Modern motor vehicles are subject to ever greater diversification in terms of their engines and chassis. This also has an impact on parts such as brake discs and brake pads, which are of particular relevance to a vehicle’s safety. The high demands in terms of material quality, handling and safety must meet the different requirements of not only the buyers but also
Improved driving comfort and very quiet running
Name and function: Flexible couplings are also known as Hardy discs, named after their inventor, John Leslie Hardy. They are used in vehicles with rear wheel or all-wheel drive and are connected to the longitudinal shaft via the integrated precision steel sleeves. The special construction of the OPTIMAL flexible couplings in the form of innovatively arranged cord packs, a special rubber compound and high-quality steel sleeves enables the compensation of not only
NEW: quadruple protection and maximum impermeability
OPTIMAL launches double-row ball bearings with improved 4 point seals Depending on the region, method of use and season, wheel bearings are exposed to particularly strong environmental influences. In particular, large quantities of dust, sand, salt, water and mud permeate the seals, shortening the lifespan of the wheel bearings. The solution is to use cassette seals with four sealing lips to boost the level of impermeability. Benefits: 4 point seal. Four innovatively arranged
More Releases for OPTIMAL:
Be Optimal - DNA's Vehicle Routing Initiative 2022
Until December 31st, 2022 companies may obtain a free Developer License of the JOpt.TourOptimizer Vehicle Routing Library The Vehicle Routing Initiative aims at software vendors that plan to incorporate advanced route planning and optimization features into their existing software products. ISV's are encouraged to contact DNA at ( https://www.dna-evolutions.com ) to obtain a free Developer Express License including email support. This offer is only valid for companies with their own applications
Be Optimal - DNA's Vehicle Routing Initiative 2022
The Vehicle Routing Initiative aims at software vendors that plan to incorporate advanced route planning and optimization features into their existing software products. ISV's are encouraged to contact DNA at ( https://www.dna-evolutions.com ) to obtain a free Developer Express License including email support. This offer is only valid for companies with their own applications and products in these fields. "This initiative has been launched because we experienced that many applications in
Training programme OPTIMAL training academy 2017
OPTIMAL AG & Co. KG’s current training programme can be ordered from OPTIMAL as a brochure in both German and English and has been available to download from OPTIMAL’s website since January 2017. OPTIMAL AG & Co. KG offers practical training, sessions on technical principles, and seminars providing the latest product news and examples of products from our wheel bearing, chassis, brake, water pump, belt drive, engine control, and wheel
OPTIMAL supplies Bendix data to TecDoc
Data on Bendix wheel bearings, shock absorbers and steering and suspension parts has been supplied to TecDoc directly from OPTIMAL since April 1, 2016. (April 2016, Langenbach) Since April 2016, OPTIMAL AG & Co. KG has been supplying data to TecDoc on parts from the premium brand Bendix in the wheel bearings, shock absorbers and steering and suspension parts product groups. From now on, all new products in these lines
ESCHA shining with optimal figures
Halver, 08 November 2011 - Following a turnover- and an order entry record in the first quarter of this year, the connector- and housing specialist ESCHA is currently heading for the best year in company history. Already by mid-October, the total turnover exceeded that of the previous year and the order entry gives rise to look ahead optimistically. “This year has been consistently positive for ESCHA“, said Dietrich Turck,
Intelligent data management allows optimal traffic flow
Various towns suffer from a lot of traffic. AUDIO MOBIL developed an automobile real-time data management, which transfers information of the car to a data center. In the process no conclusion to the driver or car owner are possible and the anonymity is assured. Only data like position, consumption, speed or temperature of the car are used. With that system traffic experts can gain relevant information about the current situation