Press release
Turbine Inlet Cooling Systems Industry Trends and key Insights by 2022
The report on the turbine inlet cooling systems market primarily focuses on inlet fogging, mechanical chillers, and wet compression technologies. Of the three technologies, mechanical chillers is more common and is utilized in a large number of gas turbines worldwide. Companies such as Mee Industries Inc. and Caldwell Energy have pioneered the inlet cooling technology and provide complete inlet cooling packages to augment plant output.
This 119 page report gives readers a comprehensive overview of the Turbine Inlet Cooling Systems market. Browse Market Research Report @
http://www.transparencymarketresearch.com/turbine-inlet-cooling-market.html
Increasing incidents of power shortages due to the drop in turbine efficiencies, especially during the summer season, compel power companies to install turbine inlet cooling systems. The number of mechanical chiller systems is further expected to grow on account of increasing adoption of gas-fired power plants globally. As the number of gas-fired power plants increases, the demand for gas turbine and hence gas turbine inlet cooling systems would increase. The installation of turbine inlet cooling systems assists plant owners/operators to augment plant output.
Mechanical chillers is one of the most efficient as well as expensive turbine inlet cooling technologies. They can attain a temperature drop in inlet air of about 45°F, which is higher than most of the available technologies. A mechanical chiller consists of a compressor that works on steam turbine, natural gas engine, or electric motor. Chiller systems may come with a thermal energy storage tank for chilled water supply. Overall, the assembly of chiller systems allows them to provide higher power output enhancement and much lower temperature. Companies such as Stellar Energy and TAS Energy Inc. have designed complete chiller system packages and are among the leading suppliers of chillers globally.
Decrease in the output of gas turbines, especially during the summer seasons, has compelled power companies to retrofit their turbines with inlet cooling systems.
Inlet fogging is one of the most widely used methods of evaporative cooling. Inlet fogging systems are easy to install and low cost as compared to other turbine inlet cooling technologies. Utilization of fogging systems increases the turbine output by nearly 10%, making it one of the low cost and effective turbine inlet cooling technologies. Currently, turbine inlet fogging systems are installed in hundreds of gas turbines all over the world. Mee Industries, Inc. is one of the major provider of turbine inlet fogging systems and offers inlet cooling solutions globally.
Similar to inlet fogging, wet compression is also an evaporative cooling technology. Wet compression is a complementary technology utilized to provide added benefits to existing evaporative cooling technologies. In wet compression more fog is added. The air containing the excess fog enters the compressor in the combustion turbine, where droplets are evaporated which leads to cooling of air and increase in air mass. However, it is a relatively newer technology and is costlier than inlet fogging. Companies such as Siemens AG and Caldwell Energy Company Inc. are major providers of wet compression systems.
Get accurate market forecast and analysis on the Turbine Inlet Cooling Systems market. Request a sample to stay abreast on the key trends impacting this market@
http://www.transparencymarketresearch.com/sample/sample.php?flag=B&rep_id=5426
Key participants in the global turbine inlet cooling systems market include American Moistening Company Inc., Caldwell Energy Company Inc., Cat Pumps Inc., Humifrio S.L., Mee Industries Inc., Score Energy Limited, Siemens AG, UTC Technologies Company, Camfil AB, and Baltec IES Pty. Ltd. This report provides an overview of these companies, followed by their financial revenues, business strategies, and recent developments. Overall, the investment outlook for the turbine inlet cooling system market is positive globally with a slightly greater preference for mechanical chiller installations.
The global market for inlet cooling systems has been segmented as follows:
Turbine Inlet Cooling Systems Market: Technology Analysis
Inlet Fogging
Mechanical Chillers
Wet Compression
Turbine Inlet Cooling Systems Market: Regional Analysis
North America
U.S.
Rest of North America
Europe
Turkey
Italy
Rest of Europe
Asia Pacific
China
Japan
Australia
Rest of Asia Pacific
Rest of the World
GCC Countries
Iran
Other countries in Rest of the World
About Us
Transparency Market Research (TMR) is a global market intelligence company providing business information reports and services. The company’s exclusive blend of quantitative forecasting and trend analysis provides forward-looking insight for thousands of decision makers. TMR’s experienced team of analysts, researchers, and consultants use proprietary data sources and various tools and techniques to gather and analyze information.
TMR’s data repository is continuously updated and revised by a team of research experts so that it always reflects the latest trends and information. With extensive research and analysis capabilities, Transparency Market Research employs rigorous primary and secondary research techniques to develop distinctive data sets and research material for business reports.
Contact Us
Transparency Market Research
90 State Street, Suite 700
Albany, NY 12207
Tel: +1-518-618-1030
USA - Canada Toll Free: 866-552-3453
Email: sales@transparencymarketresearch.com
Website: http://www.transparencymarketresearch.com/
Visit Blog : http://depthresearchreport.blogspot.in/
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Turbine Inlet Cooling Systems Industry Trends and key Insights by 2022 here
News-ID: 572813 • Views: …
More Releases from Transparency Market Research
Global Solar Powered Agricultural Dryer Market to Exceed USD 2.4 Billion by 2031 …
The global solar powered agricultural dryer market, valued at US$ 1.6 billion in 2022, is projected to grow at a CAGR of 5.8% from 2023 to 2031, reaching US$ 2.4 billion by the end of 2031. Rising investments in renewable energy, growing awareness of sustainable agricultural practices, and the rapid expansion of the agricultural sector driven by population growth are key factors fueling market growth.
Uncover essential discoveries and trends from…
Technetium-99m Market Forecast 2034: Rising Demand for Diagnostic Imaging and Ra …
The global Technetium‐99m Market was valued at US$ 6.0 Billion in 2023 and is projected to grow at a CAGR of 3.3% from 2024 to 2034, surpassing US$ 8.6 Billion by the end of the forecast period. Advancements in nuclear imaging infrastructure, government-backed healthcare initiatives, and an increasing demand for precise diagnostic procedures are fueling this growth.
Discover essential conclusions and data from our Report in this sample -
https://www.transparencymarketresearch.com/sample/sample.php?flag=S&rep_id=77100
Analysts' Viewpoint
The Technetium‐99m…
Equine Diagnostic Services Market Outlook 2030: From US$ 168 Million in 2019 to …
The global Equine Diagnostic Services Market, valued at approximately US$ 168 million in 2019, is projected to expand at a compound annual growth rate (CAGR) of ~5% from 2020 to 2030, reaching around US$ 280 million by 2030. Equine diagnostic services, encompassing tests like genetic, infectious disease, and imaging diagnostics, are critical for managing horse health in veterinary hospitals, clinics, and mobile settings. The market is driven by increasing equine…
Digital Printing Market to Reach USD 54.4 Billion by 2034, Growing at a CAGR of …
The digital printing market is experiencing strong growth, driven by rapid technological advancements, rising demand for personalized and on-demand printing, and an increasing focus on sustainable solutions. Digital printing allows for the direct transfer of digital files onto a wide range of substrates, offering high-resolution output with greater speed and flexibility. Its adaptability has led to broad adoption across industries such as packaging, textiles, publishing, and advertising-sectors where customization, efficiency,…
More Releases for Inlet
Turbine Inlet Cooling Systems Market 2023 | Futuristic Technology- Baltec IES, C …
The Turbine Inlet Cooling Systems report compiles the market information depending upon market development and growth factors, optimizing the growth path. In addition, it highlights the strategies and market share of the leading vendors in the particular market. The report follows a robust research methodology model that helps to make informed decisions. It obtains both qualitative and quantitative market information supported by primary research.
The Turbine Inlet Cooling Systems research report…
Turbine Inlet Cooling System Market Growth, Top Major Manufacture, and Overviews …
Los Angeles, United State: The report attempts to offer high-quality and accurate analysis of the global Turbine Inlet Cooling System market, keeping in view market forecasts, competitive intelligence, and technological risks and advancements, and other important subjects. Its carefully crafted market intelligence allows market participants to understand the most significant developments in the global Turbine Inlet Cooling System market that are impacting their business. Readers can become aware of crucial…
Turbine Inlet Cooling System Market Production Growth Rate Comparison by Type (2 …
QY Research recently published a research report titled, "Turbine Inlet Cooling System Industry Research Report, Growth Trends and Competitive Analysis 2020-2026". The research report is collated on the basis of historic and forecast data derived by using primary and secondary methodologies by researchers. The global Turbine Inlet Cooling System market is one of the fastest-growing markets and is expected to witness substantial growth in the forecast years. Reader are provided…
Global Turbine Inlet Cooling System Market 2019-2025
Press Release – 24 Jan 2019
Research and Development News --
. .
Latest Update "Global Turbine Inlet Cooling System Market Insights,Forecast to 2025" with Industries Survey | Global Current Growth and Future.
' '
Turbine Inlet Chilling (TIC) is a system of air conditioning for a gas turbine to maximize the gas turbine output across all ambient conditions. This system can use water or forced air as the form of cooling.
The Turbine Inlet…
Turbine Inlet Cooling Systems Market by Technology (Inlet Fogging Systems and We …
ALBANY, NY, April 19, 2017 : Rising demand for energy is driving the construction of new power plants globally. Despite the prevailing economic slowdown, demand for power is expected to grow on account of urbanization and rise in population. The drop in plant efficiency during summer seasons raises concerns related to blackouts and power outages. The solution to such problems is capacity additions. However, capacity addition either through the construction…
Global Turbine Inlet Cooling Systems Market 2017-2021
MarketResearchReports.Biz presents this most up-to-date research on "Global Turbine Inlet Cooling Systems Market 2017-2021"
Description
Turbine inlet cooling systems help in improving the efficiency and performance of gas turbines. Cooling technologies involved include mechanical chillers, inlet fogging, wet compression, hybrid systems, and others.
Technavios analysts forecast the global turbine inlet cooling systems market to grow at a CAGR of 3.98% during the period 2017-2021.
Covered in this report
The report covers the present scenario and…
