openPR Logo
Press release

BudgetSensors Introduces DLC Coated AFM Probes

04-08-2008 07:19 PM CET | Science & Education

Press release from: Innovative Solutions Bulgaria Ltd.

Sofia, Bulgaria – 8sr April 2008 - BudgetSensors®, a Bulgarian manufacturer of silicon and silicon nitride probes, as well as AFM accessories for Atomic Force Microscopes (AFM), announces the introduction of a range of Diamond-Like-Carbon (DLC) coated AFM probes.

All basic types of BudgetSensors’ silicon AFM probes (Standard tapping mode, Tapping mode with long cantilever, Soft tapping mode, Force modulation mode and Contact mode) are now available with a DLC coating on the tip side of the cantilever.

The hard DLC coating offers high durability and decreased tip wear, hereby increasing tip life. At the same time, because of the excellent properties of this coating, the effect on tip is only minimal: the tip radius of all DLC coated AFM probes is better than 15nm.
The DLC coating is not electrically conductive.

All DLC coated AFM probes are being offered with an aluminium reflex coating on the back side of the cantilever and with alignment grooves on the holder chip.

Hereby, BudgetSensors range of products is being extended by the following Order Codes:

Tap300DLC – Standard tapping mode AFM probe with DLC coating
Tap190DLC - Tapping mode AFM probe with long cantilever, with DLC coating
Tap150DLC – Soft tapping mode AFM probe with DLC coating
Multi75DLC – Force modulation mode AFM probe with DLC coating
ContDLC – Contact mode AFM probe with DLC coating

BudgetSensors is working on more product introductions, which will follow until the end of this year.

More information on these and other BudgetSensors® products can be found here: www.budgetsensors.com.

Innovative Solutions Bulgaria Ltd.
48, Joliot Curie St
Sofia 1113
Bulgaria
Tel: +359 (2) 963 09 41
sales@budgetsensors.com

www.isb.bg
www.budgetsensors.com

About BudgetSensors® and Innovative Solutions Bulgaria Ltd.:
BudgetSensors® is a trade mark of Innovative Solutions Bulgaria Ltd.
Established in 2001 and located in the Bulgarian capital Sofia, Innovative Solutions Bulgaria Ltd. offers a variety of products and services within its three divisions AFM Probes, Print & Design and Web & Programming.

The AFM Probe division manufactures and sells probes and accessories for Atomic Force Microscopes under the trade name of BudgetSensors® used by the most advanced R&D institutions worldwide. The Atomic Force Microscope (AFM) is one of the most important instruments for the Nanotechnology industry and research.

The Print & Design and Web & Programming divisions offer solutions for corporate design, presentation and promotion materials.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release BudgetSensors Introduces DLC Coated AFM Probes here

News-ID: 41609 • Views: 1082

More Releases from Innovative Solutions Bulgaria Ltd.

BudgetSensors Introduces a Calibration Standard with 500nm Step Height
Sofia, Bulgaria – 31st July 2008 - Following the introduction of the AFM height calibration standards HS-100MG and the HS-20MG, BudgetSensors, the Bulgarian manufacturer of silicon and silicon nitride probes, as well as AFM accessories for Atomic Force Microscopes (AFM), announces the commercial introduction of third type of AFM height calibration standard – the HS-500MG. Just as the height calibration standards HS-100MG and the HS-20MG, the HS-500MG features silicon dioxide structure
BudgetSensors® Introduces All-In-One AFM Probes
Sofia, Bulgaria – 29th July 2008 - BudgetSensors®, a Bulgarian manufacturer of silicon and silicon nitride probes, as well as AFM accessories for Atomic Force Microscopes (AFM), announces the commercial introduction of the “All-In-One AFM Probe” - a versatile silicon AFM probe with 4 different cantilevers on a single holder chip. All-In-One AFM probes (Order Code: AIO and AIOAl) feature cantilevers for Tapping Mode, Soft Tapping Mode, Force Modulation and Contact
BudgetSensors Introduces NEW Calibration Standards
Sofia, Bulgaria – 26th May 2008 - As a response to the increased demand for affordable high-quality AFM calibration standards, BudgetSensors®, a Bulgarian manufacturer of silicon and silicon nitride probes, as well as AFM accessories for Atomic Force Microscopes (AFM), announces the commercial introduction of 2 different AFM height calibration standards – the HS-100MG and the HS-20MG. Both height calibration standards feature silicon dioxide structure arrays on a 5x5mm silicon chip.
BudgetSensors Introduces NEW Tapping Mode AFM probe and Alignment Grooves for a …
Sofia, Bulgaria – 1st November 2007 - BudgetSensors®, a Bulgarian manufacturer of silicon and silicon nitride probes, as well as AFM accessories for Atomic Force Microscopes (AFM), announces the introduction of a new tapping mode AFM probe, as well as a new feature for a selection of AFM probes. Following the introduction of BudgetSensors®’ Soft Tapping Mode AFM Probes Tap150-G and Tap150Al-G, the company now announces the introduction of another type

All 7 Releases


More Releases for DLC

DLC approves SGS for Testing and Certification of Horticultural Lighting
SGS is pleased to announce that it has been authorized by the DesignLights Consortium® (DLC) as an approved Safety Certification body for the testing and certification of LED-based horticultural lighting. The DLC, a non-profit organization dedicated to accelerating the widespread adoption of high-performing commercial lighting solutions, promotes high-quality, energy-efficient lighting products in collaboration with utilities and energy efficiency program members, manufacturers, lighting designers, and federal, state, and local entities. John Ciliege,
Bone Curette Market Analysis (2019- 2025): Shinva, Sklar Surgical Instruments, B …
The market research report is a compilation of comprehensive intelligence studies that explore almost every aspect of the global Bone Curette market. Market players can use the report to learn about the competitive landscape and the level of competition in the global Bone Curette market. The report comes out as a powerful tool that players can use to prepare themselves for securing a lion’s share of the global Bone Curette
Global and Regional Diamond-like Carbon (DLC) | Market Production & Sales | Mark …
Description : HNY Research projects that the Diamond-like Carbon (DLC) market size will grow from in 2017 to by 2023, at an estimated CAGR of . The base year considered for the study is 2017, and the market size is projected from 2018 to 2023. Diamond-like Carbon or DLC consists of carbon atoms with sp3 bonding. It has high mechanical hardness, chemical inertness, and optical transparency. DLC coating has been garnering interest
Feb 1, 2018: Hydrogenated Diamond-Like Carbon Coating (DLC) Market Share 2023 Mi …
Hydrogenated Diamond-Like Carbon Coating (DLC) Market Research 2018 A market study "Global Hydrogenated Diamond-Like Carbon Coating (DLC) Market" examines the performance of the Hydrogenated Diamond-Like Carbon Coating (DLC) market 2018. It encloses an in-depth Research of the Hydrogenated Diamond-Like Carbon Coating (DLC) market state and the competitive landscape globally. This report analyzes the potential of Hydrogenated Diamond-Like Carbon Coating (DLC) market in the present and the future prospects from various angles
GREEN CREATIVE launches DLC qualified HYPERBAY Series High Bay luminaires
SAN BRUNO, CA, February 21st, 2017, GREEN CREATIVE, the commercial grade LED lighting manufacturer, proudly announces the release of its 95W, 130W and 185W High Bay LED luminaires. Part of GREEN CREATIVE’s new HYPERBAY Series, these DLC® qualified compact 2x2’ luminaires feature a lightweight sturdy construction. Each fixture comes with three different optic choices (general prismatic, medium and aisle) to meet all low and high bay application needs. The 95W version
ALT's Outdoor Lighting Series Has Just received DLC Certification
Aeon Lighting Technology Inc. (ALT) has just received Design Lights Consortium (DLC) certification for its Outdoor lighting series—Lodestar—through its partner L.E.D. Rite, LLC, located in Illinois, USA. ALT has continued to raise the bar with constant innovation and improvement in high power LED lighting, becoming the leader of innovation in the LED lighting market. Receiving DLC certification is another testament to this fact. Design Lights Consortium (DLC)—an organization funded by,