openPR Logo
Press release

BudgetSensors Introduces NEW Tapping Mode AFM probe and Alignment Grooves for a Selection of AFM Probes

11-06-2007 11:17 AM CET | Science & Education

Press release from: Innovative Solutions Bulgaria Ltd.

Sofia, Bulgaria – 1st November 2007 - BudgetSensors®, a Bulgarian manufacturer of silicon and silicon nitride probes, as well as AFM accessories for Atomic Force Microscopes (AFM), announces the introduction of a new tapping mode AFM probe, as well as a new feature for a selection of AFM probes.

Following the introduction of BudgetSensors®’ Soft Tapping Mode AFM Probes Tap150-G and Tap150Al-G, the company now announces the introduction of another type of Tapping Mode AFM probe – the Tap190-G. In addition to a resonance frequency of about 190 kHz, Tap190-G AFM probes are characterized by a long cantilever, compared to Tap300 and Tap150-G AFM probes, which is required for some specific models of AFM systems by certain manufacturers, such as Quesant.

At the same time, BudgetSensors announces that it now offers a selection of AFM probes featuring alignment grooves on the back side of the holder chip, which is indicated by the index “-G” in the product order code. Alignment grooves are a necessary requirement for the mounting of AFM probes into some specific AFM systems, such as NanoSurf. In AFM systems where alignment grooves are not necessary, this feature doesn’t affect the mounting of the AFM probe in any way.

The current product range of AFM probes with alignment grooves on the holder chip features:
• Tap150-G soft tapping mode AFM probes
• Tap150Al-G soft tapping mode AFM probes with Al coating
• Tap190-G tapping mode AFM probes with long cantilever
• Tap190Al-G tapping mode AFM probes with long cantilever and Al coating
• Multi75Al-G force modulation AFM probes with Al coating
• ContAl-G contact mode AFM probes with Al coating
• Multi75E-G electrical force modulation AFM probes
• Multi75M-G magnetic AFM probes

More product types with alignment grooves will be released soon.

With or without alignment grooves, .the prices of all comparable product types remain the same.

BudgetSensors is working on more product introductions, which will follow until the end of this year.

About BudgetSensors® and Innovative Solutions Bulgaria Ltd.:
BudgetSensors® is a trade mark of Innovative Solutions Bulgaria Ltd.
Established in 2001 and located in the Bulgarian capital Sofia, Innovative Solutions Bulgaria Ltd. offers a variety of products and services within its three divisions AFM Probes, Print & Design and Web & Programming.

The AFM Probe division manufactures and sells probes and accessories for Atomic Force Microscopes under the trade name of BudgetSensors® used by the most advanced R&D institutions worldwide. The Atomic Force Microscope (AFM) is one of the most important instruments for the Nanotechnology industry and research.

The Print & Design and Web & Programming divisions offer solutions for corporate design, presentation and promotion materials.

Innovative Solutions Bulgaria Ltd.
48, Joliot Curie St
Sofia 1113
Bulgaria
Tel: +359 (2) 963 09 41
sales@budgetsensors.com

www.isb.bg
www.budgetsensors.com

BudgetSensors®, a division of Innovative Solutions Bulgaria Ltd., introduces new tapping mode AFM probes, as well as a new feature for a selection of AFM probes.

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release BudgetSensors Introduces NEW Tapping Mode AFM probe and Alignment Grooves for a Selection of AFM Probes here

News-ID: 31722 • Views: 552

More Releases from Innovative Solutions Bulgaria Ltd.

BudgetSensors Introduces a Calibration Standard with 500nm Step Height
Sofia, Bulgaria – 31st July 2008 - Following the introduction of the AFM height calibration standards HS-100MG and the HS-20MG, BudgetSensors, the Bulgarian manufacturer of silicon and silicon nitride probes, as well as AFM accessories for Atomic Force Microscopes (AFM), announces the commercial introduction of third type of AFM height calibration standard – the HS-500MG. Just as the height calibration standards HS-100MG and the HS-20MG, the HS-500MG features silicon dioxide structure
BudgetSensors® Introduces All-In-One AFM Probes
Sofia, Bulgaria – 29th July 2008 - BudgetSensors®, a Bulgarian manufacturer of silicon and silicon nitride probes, as well as AFM accessories for Atomic Force Microscopes (AFM), announces the commercial introduction of the “All-In-One AFM Probe” - a versatile silicon AFM probe with 4 different cantilevers on a single holder chip. All-In-One AFM probes (Order Code: AIO and AIOAl) feature cantilevers for Tapping Mode, Soft Tapping Mode, Force Modulation and Contact
BudgetSensors Introduces NEW Calibration Standards
Sofia, Bulgaria – 26th May 2008 - As a response to the increased demand for affordable high-quality AFM calibration standards, BudgetSensors®, a Bulgarian manufacturer of silicon and silicon nitride probes, as well as AFM accessories for Atomic Force Microscopes (AFM), announces the commercial introduction of 2 different AFM height calibration standards – the HS-100MG and the HS-20MG. Both height calibration standards feature silicon dioxide structure arrays on a 5x5mm silicon chip.
BudgetSensors Introduces DLC Coated AFM Probes
Sofia, Bulgaria – 8sr April 2008 - BudgetSensors®, a Bulgarian manufacturer of silicon and silicon nitride probes, as well as AFM accessories for Atomic Force Microscopes (AFM), announces the introduction of a range of Diamond-Like-Carbon (DLC) coated AFM probes. All basic types of BudgetSensors’ silicon AFM probes (Standard tapping mode, Tapping mode with long cantilever, Soft tapping mode, Force modulation mode and Contact mode) are now available with a DLC coating

All 5 Releases


More Releases for AFM

Atomic Force Microscope Market Trends, CAGR, Key Players, Applications, Types (R …
The new report on Atomic Force Microscope provides strategic insights on the Market's growth vis-à-vis the key players and market segments. The study measures the key metrics like CAGR, Market Size, Market Forecast, Consumer Distribution, Price & Cost Overview, Growth opportunities, Company profiles, sales data etc. It also delves into the competition structure and products in the market. The Product Types covered in the Atomic Force Microscope Market Research Report include
Global AFM Probe Market Size 2018-2025 Olympus, NanoWorld, SmartTip
A detailed market study on "Global AFM Probe Market" examines the performance of the AFM Probe market. It encloses an in-depth Research of the AFM Probe market state and the competitive landscape globally. This report analyzes the potential of AFM Probe market in the present and the future prospects from various angles in detail. The Global AFM Probe Market 2018 report includes AFM Probe market Size, Revenue, market Share, AFM Probe
Global Atomic Force Microscope (AFM) Consumption 2016 Market Research Report
Summary The Global Atomic Force Microscope(AFM) Consumption 2016 Market Research Report is a professional and in-depth study on the current state of the Atomic Force Microscope(AFM) market. First, the report provides a basic overview of the Atomic Force Microscope(AFM) industry including definitions, classifications, applications and industry chain structure. And development policies and plans are discussed as well as manufacturing processes and cost structures. Browse Report Summary with TOC @ http://www.reportbazzar.com/product/global-atomic-force-microscope-afm-consumption-2016-market-research-report/ Secondly, the report states
NANOSENSORS introduces Carbon Nanotube AFM probes
Neuchatel, December 2nd 2008, NANOSENSORS™ today announced that it has added a Carbon Nanotube SPM probe to its scope of products. The Single or Double Walled Carbon Nanotubes (CNT) at the end of the tips are grown by chemical vapour deposition and are ready to use, no shortening or post processing is necessary. NANOSENSORS CNT probes are Single/Double Wall Carbon Nanotube SPM probes with a tip diameter between 2 and 3 nm.
BudgetSensors® Introduces All-In-One AFM Probes
Sofia, Bulgaria – 29th July 2008 - BudgetSensors®, a Bulgarian manufacturer of silicon and silicon nitride probes, as well as AFM accessories for Atomic Force Microscopes (AFM), announces the commercial introduction of the “All-In-One AFM Probe” - a versatile silicon AFM probe with 4 different cantilevers on a single holder chip. All-In-One AFM probes (Order Code: AIO and AIOAl) feature cantilevers for Tapping Mode, Soft Tapping Mode, Force Modulation and Contact
BudgetSensors Introduces DLC Coated AFM Probes
Sofia, Bulgaria – 8sr April 2008 - BudgetSensors®, a Bulgarian manufacturer of silicon and silicon nitride probes, as well as AFM accessories for Atomic Force Microscopes (AFM), announces the introduction of a range of Diamond-Like-Carbon (DLC) coated AFM probes. All basic types of BudgetSensors’ silicon AFM probes (Standard tapping mode, Tapping mode with long cantilever, Soft tapping mode, Force modulation mode and Contact mode) are now available with a DLC coating