Bühler Motor now certified under DIN EN 9100 for the aerospace industry
Nuremberg, 11 January 2017 – Now it’s official: With the handover of the documents by TÜV Süd on November, 9th 2016, Bühler Motor GmbH, with sites in Nuremberg and Monheim, is now DIN EN 9100 certified (AS 9100C and JISQ 9100:2009) for the aerospace industry.“As the manufacturer of complete electrical seat actuation systems (PAXCOM), we take full responsibility in dealings with our clients and the aerospace authorities. Certification according to EN 9100 confirms the high level of our quality management systems and underscores our level of performance as a reliable, qualified supplier to the aerospace industry”, commented Stefan Schlosser, Director Product Segment Seat Actuation at Bühler Motor GmbH.
Thanks to the intense preparation, the certification procedure for the DIN EN 9100 quality management system for manufacturers/service providers in the aviation industry was successfully completed in just 12 months from kick-off through analysis and implementation of the requirements to actual certification.
The content and structure of the EN 9100 series, which was developed by the International Aerospace Quality Group (IAQG), are based on the cross-industry standard DIN EN ISO 9001. In addition, it also contains specific additions and interpretations tailored to the particular needs and requirements of the aerospace industry.
These include, for example, the quality management requirements of the aviation authorities, the introduction of a configuration management process appropriate for the product, first article inspection (FAI), risk assessment, verification and traceability and the definition of authorizations especially for product releases.
As a DIN EN 9100 certified manufacturer, Bühler Motor is listed in the OASIS (Online Aerospace Supplier Information System) database, which is accessible world-wide.
About Bühler Motor
Bühler Motor stands for demanding, custom-made, and reliable mechatronic drive solutions with DC/BLDC small motors and gear motors and pumps.
More than one of out every ten employees at Bühler Motor works in Research and Development. Our in-house sample shop and R&D department, combined with state-of-the-art test labs, enable Bühler to concentrate completely on quick and flexible development of customer specific drive solutions.
More than 1,750 employees worldwide ensure successful development, industrialization and production of mechatronic drive solutions for mid- to high volume applications.
With ten locations on three continents and highly developed process competencies, Bühler Motor is able to fulfill all customer requirements for short transit times, quality, and on-time delivery at the required volumes.
The company’s strategic markets include the automotive market, the healthcare equipment market, general industrial solutions in the fields of building automation, agriculture, transportation and seat actuation for aviation.
www.buehlermotor.com
Bühler Motor GmbH
Roswitha Gries
Corporate Communication
Anne-Frank-Straße 33-35
90459 Nürnberg
Germany
Phone: +49 911 45 04-1129
Fax: +49 911 43 08 69-1129
e-mail: Roswitha.Gries@buehlermotor.com
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Bühler Motor now certified under DIN EN 9100 for the aerospace industry here
News-ID: 412670 • Views: …
More Releases from Bühler Motor
Bühler Motor strengthens customer orientation
Realignment of the Sales and Marketing department of the Bühler Motor Group
Nuremberg, 28th June 2021 - With the new organization of the Sales and Marketing division, the Bühler Motor Group is directing its focus even more strongly on its customers and their needs.
The new organization brings together the global areas of Acquisition, Sales, Partner Business as well as Marketing under the leadership of Holger Ehrhardt, who has already taken…
Tailwind for the realignment of Bühler Motor
Nuremberg, April 20, 2021 – As of December 1, 2020, Matthias Bugla assumed overall responsibility for quality management in the Bühler Motor Group worldwide as Vice President Quality. This includes ensuring that all development and production targets are met and that the customer's quality requirements are fully implemented.
On March 8, 2021, Paulo Aguiar took over responsibility for program management at the Bühler Group worldwide as Vice President Program Management. In…
Buehler Motor Recognized by General Motors as a 2019 Supplier of the Year Winner
Nuremberg, July 8, 2020 – Buehler Motor was named a GM Supplier of the Year by General Motors during a virtual ceremony honoring the recipients of the company’s 28th annual Supplier of the Year awards on Wednesday, June 24, 2020.
During the event, GM recognized 116 of its best suppliers from 15 countries that have consistently exceeded GM’s expectations, created outstanding value or introduced innovations to the company. The awards…
Bühler Motor strengthens its management
With his experience in the areas of automotive, industry, drive technology and fluid management, Achim Brömmel, as the new Vice President for Program Management Automotive & Industrial Drive Solutions, fits perfectly to Bühler Motor
Nuremberg, October 7, 2019 – On October 1, Achim Brömmel took over responsibility for Program Management for Automotive & Industrial Drive Solutions of the Bühler Motor Group. In this position, he follows Mark Furtwängler, who up to…
More Releases for DIN
Perle Launches DIN Rail Hi-PoE Injectors
Perle Systems, a global provider of advanced Device Networking Hardware, today announced the availability of DIN Rail PoE Injectors.
INJ PoE Injectors are designed to provide up to 60W of IEEE802.3bt compliant power over Ethernet cabling to connected devices such as wireless access points, pan-tilt-zoom (PTZ) cameras and video phones. Power over Ethernet Injectors enable increased flexibility for the location of installed equipment and can support long Ethernet runs up to…
Perle launches DIN Rail Patch Panels
Simplify the connection between field cabling and control cabinet cabling
NASHVILLE, TN—June 25th, 2019 — Perle Systems, a global provider of advanced Device Networking Hardware, today announced the availability of DIN Rail Patch Panels.
One-to-one patch panels enable organised, flexible and easy connections between field cabling and the control cabinet. Standard Ethernet patch cables are used between the patch panel and the control cabinet equipment, such as PLCs, switches and routers. Through…
Global DIN Rail Mounted Accessories Market Professional Survey Report
This report studies DIN Rail Mounted Accessories in Global market, especially in North America, China, Europe, Southeast Asia, Japan and India, with production, revenue, consumption, import and export in these regions, from 2013 to 2018, and forecast to 2025. This report focuses on top manufacturers in global market, with production, price, revenue and market share for each manufacturer, covering ABB Eaton WAGO TE Connectivity Connectwell Schneider Electric Omron Wieland Electric…
Global DIN Rail Terminal Blocks Industry Market Analysis & Forecast
Global DIN Rail Terminal Blocks Industry Market Analysis & Forecast 2018-2023, the revenue is valued at USD XX million in 2017 and is expected to reach USD XX million by the end of 2023, growing at a CAGR of XX% between 2018 and 2023. The production is estimated at XX million in 2017 and is forecasted to reach XX million by the end of 2023, growing at a CAGR of…
DIN Connectors Market to Record an Exponential CAGR by 2018 to 2028(According to …
DIN Connectors- Market Overview
A DIN connector is a type of electronic connectors that are used for various applications. DIN connectors contains straight round pins, which are composed of a protective metal skirt. The DIN Connectors are used parimarily in the analog audio/video devices and for electrical connections. DIN connectors were also used in earlier PCs for mice and keyboards as plugs and sockets. Eventually, all DIN-Connector-based mice and keyboards were…
New ex-stock centenary catalogue from Lee Spring has more DIN-Plus springs – s …
Lee Spring’s new Centenary Catalogue issue 25 includes a full new section of DIN-Plus parts 2 and 1 compression springs. This extensive 525 series of new parts in end-closed passivated stainless steel wire, or end-squared and ground plated spring steel, provides manufacturers with a welcome resource for rapid delivery of standard parts, as well as a springboard for specification of custom units to suit those slightly different installations. DIN part…