Press release
ATEX-certified wireless pres-sure transmitter M5601 for up to 1,000 bar
M5601 wireless media compatible pressure transmitter
Whether for the measurement of air, gas or oil pressure in plant areas that are difficult to access, for mobile maintenance work with logging of measurement data or for more reliability through predictive maintenance, this sensor transmits measurement data quickly and reliably via Bluetooth. Precise pressures and temperatures can be immediately retrieved on the app for Android™ 4.3 or iOS 7 and higher versions. Battery lives of over two years are no longer a problem thanks to the energy-saving BLE 4.2 protocol.
With the M5601 AMSYS provides a media-resistant Bluetooth sensor for the measurement of abso-lute and gage pressure. As it is IP65 certified, it also qualifies for use in harsh ambient conditions. Measurable maximum pressures lie between 70 and 1,000 bar (also available as the M5600 without ATEX certification for smaller pressures starting at 3.5 bar).
The pressure transmitters are powered by a CR2032/CR2050W button cell and can be read out using an app or PC software for Windows® XP/7 and higher. They measure the gage or absolute pressure independently of the media. The latter device is configured as a sealed gage relative to a trapped vol-ume, whereas the gage and compound version outputs the measurement relative to atmospheric pressure - the compound version also with negative pressure. All versions are available with various pressure connectors.
Wireless M5601 pressure transmitters are recommended for their robustness, good long-term stability and numerous protective functions for demanding industrial applications. The medium only comes into contact with 17-4 PH stainless steel (1.4542); no internal O-ring is used! This allows all oils, includ-ing gasoline and other fuels, to be measured. They can even be used in contaminated water, steam and slightly corrosive liquids.
Parallel to the M5601 AMSYS GmbH & Co. KG also supplies a pressure transmitter for smaller pres-sure ranges of up to 350 mbar or 35 bar - the U5601 - that is distinguished by its high accuracy and also has ATEX and various other internationally recognized certification for intrinsic safety. These sensors do not need any internal seals yet do have an oil cavity behind the stainless-steel membrane to transmit pressure to a silicon MEMS chip.
AMSYS GmbH & Co. KG from Mainz, Germany, is your specialist for the customized adaptation of pressure, humidity and temperature sensors. The most frequent - but by no means only - requests we receive from our customers in this regard are for special pressure ranges or application-specific software. Whether for a retrofit for pressure measurement, a distance query or integration in a predic-tive maintenance process, in all three cases wireless pressure transmitter M5601 for absolute and gage pressures of up to 1,000 bar is a safe and reliable option.
AMSYS GmbH & Co. KG
An der Fahrt 4
55124 Mainz
Tel: +49 6131 469875-0
https://www.amsys-sensor.com
Valentino Fruci
v.fruci@amsys.de
AMSYS GmbH & Co. KG is a medium-sized company based in Germany that has focused on sensor technology since its founding. Sensor distributor AMSYS is one of the specialists in pressure measurement technology on the German-speaking market.
The AMSYS product portfolio ranges from piezoresistive pressure sensing elements through simple SMD-equipped measurement transducers, amplified/unamplified and matched OEM sensors and PCB modules to ready-to-use pressure transmitters.
AMSYS supplies sensors and pressure sensing elements in a pressure range of 0.25 mbar to 800 bar. In addition to its wide spectrum of pressure sensor types, AMSYS also provides OEM humidity sensors, temperature and inclination sensors and wireless radio solutions.
Thanks to the technical expertise of its personnel and good contact to its suppliers, AMSYS can also modify and customize its standard products, thus providing tailor-made solutions. For more information, please go to www.amsys-sensor.com.
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release ATEX-certified wireless pres-sure transmitter M5601 for up to 1,000 bar here
News-ID: 3117007 • Views: …
More Releases from AMSYS GmbH & Co. KG
MS 5849 - Chlorine resistant gel-protected absolute pressure sensor for 2, 7 and …
The MS5849 is a digital OEM sensor that achieves high media resistance thanks to protective gel variants and can also be used as a biocompatible measuring element in medical devices. The absolute pressure is measured here with a high 24-bit resolution and output as a calibrated signal via the I2C or SPI interface.
The reflow-capable sensors are designed for pressure ranges of 0.2 - 2 bar, 0.2 - 7 bar and…
TPS - New low pressure sensors with I3C thanks to new ASIC
The new low-pressure sensors of the TPS series from AMSYS / TE Connectivity in Mainz combine state-of-the-art piezoresistive pressure sensing elements with a highly integrated CMOS ASIC for digital signal processing. This powerful combination is housed in a particularly compact SOIC-16 package, making it ideal for space-constrained applications in industrial and medical measurement technology.
The integrated CMOS ASIC not only supports conventional serial interfaces but also features an I3C-compatible digital interface…
New ultrasonic air bubble detector 300 µm AD-102
For 25 years, AMSYS has been advising customers on the use of sensors for industrial and, increasingly, medical applications. With the AD-102, the Mainz-based sales company now offers a high-precision air bubble detector. This is used to detect an interruption in fluid flow in applications such as infusion pumps, hemodialysis, blood flow monitoring, but also in 3D printing and food processing.
The compact AD-102 air bubble detector (ABD) is used for…
AST H2 - Pressure Transmitter for hydrogen applications
Hydrogen will play a steadily increasing role among renewable energies. However, the processing and handling of this fuel also presents us with new challenges. With the AST2000 and AST4000, AMSYS offers two variants of a pressure transducer specially certified for applications with hydrogen. With the EC79 certificate, these pressure sensors are suitable for use in fuel cells, hydrogen storage tanks and filling stations. The sensors are made from a single…
