Press release
emtas CANopen stack for XMC MCUs using the latest Infineon DAVE™ (version 4)
Only four weeks after the first presentation of the new DAVE™ at the Embedded World 2015, CAN experts of emtas GmbH have now released the first version of the CANopen driver package using Infineon’s DAVE™ (version 4) for the easy to integrate and very modular emtas CANopen protocol stack implementing CiA 301 V4.2.
The CANopen driver supports all members of the XMC4000 MCU portfolio ranging from XMC4108 to up to XMC4500 with a MultiCAN module that offers up to 3 CAN nodes with up to 64 message objects. The XMC4108 series features 1 CAN node, 64kB Flash, 20kB RAM, up to 125°C TA, up to 80MHz clock for peripherals and ARM® Cortex™-M4 with built-in DSP and SFPU, MPU, DMA, Programmable Hardware Interconnect Matrix in combination with rich and flexible Timers/PWMs/POSIF, analog-mixed signals and communication features in a 7x7mm VQFN-48 package. As the largest device in Infineon’s XMC4000 family the XMC4500 series offers 3 CAN nodes, 120MHz, 1MB Flash, additional peripherals including Ethernet, USB, SDIO/SD/MMC, and External Bus Unit.
The new release of emtas CANopen driver and protocol stack ensures flexible and configurable use of the CANopen protocol in Full CAN mode, Basic CAN mode, or Basic CAN mode with hardware RX FIFO. It is implemented MISRA-C conform according to the latest CiA communication profile 301 V4.2 for classic CAN and NMT master functionality following CiA 302-2 including CiA 305 LSS services.
It is well suited to develop devices following the CiA device profiles and for EnergyBus products.
The CANopen development process is supported by tools to generate the object dictionary and test tools for automated device tests.
Links:
http://www.emtas.de/en
http://www.emtas.de/partner/infineon
www.infineon.com/xmc
www.infineon.com/dave
emtas GmbH is located in Merseburg, Germany and is a supplier of CANopen, EnergyBus and EtherCAT protocol software and tools. Additionally emtas offers integration support, development services as well as consulting and training for the topics CANopen, EnergyBus and EtherCAT.
Andreas Boebel
CEO
emtas GmbH
Fritz-Haber-Str. 9
D-06217 Merseburg
Germany
Tel.:+49 (0)3461 / 79416-11
Fax.:+49 (0)3461 / 79416-10
service@emtas.de
www.emtas.de
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release emtas CANopen stack for XMC MCUs using the latest Infineon DAVE™ (version 4) here
News-ID: 307374 • Views: …
More Releases from emtas GmbH
emtas CANopen FD protocol stack and tools released
Merseburg, October 2017
After the release of the CANopen FD specification CiA 1301 1.0 by the CAN in Automation e.V. emtas now announces their CANopen FD Master/Slave protocol stack.
Based on its field proven CANopen protocol stacks emtas has developed their new CANopen FD Master/Slave protocol stack, which can be used to develop CANopen FD master and slaves devices. The stack is delivered as source code for various targets and licensed under…
emtas Joins STMicroelectronics Partner Program to Accelerate Customer Time-to-Ma …
Merseburg, September 2nd – emtas GmbH announces that it has joined the STMicroelectronics Partner Program to make its CAN- and CAN-FD-based protocol stacks CANopen, CANopen FD and J1939 and related software development services available to customers.
“The efficient ST microcontrollers, especially the STM32 family that is supported by every emtas' protocol stack and applied with our stacks in various projects, have been appreciated by our customers for a long time,” says…
emtas CANopen FD support for STMicroelectronics STM32H7
Merseburg, March 2017 - At the Embedded World emtas GmbH presents its new CANopen FD protocol stack running on STMicroelectronics STM32H7 micro controller with CAN FD support.
Based on its field proven CANopen protocol stack emtas has developed their new CANopen FD protocol stack. Having used PC-based CAN FD interfaces hitherto, the CANopen FD stack has now been ported to the STM32H7 micro controller – one of the first industrial micro…
More Releases for CANopen
emtas CANopen FD support for STMicroelectronics STM32H7
Merseburg, March 2017 - At the Embedded World emtas GmbH presents its new CANopen FD protocol stack running on STMicroelectronics STM32H7 micro controller with CAN FD support.
Based on its field proven CANopen protocol stack emtas has developed their new CANopen FD protocol stack. Having used PC-based CAN FD interfaces hitherto, the CANopen FD stack has now been ported to the STM32H7 micro controller – one of the first industrial micro…
CANopen Protocol stacks for Fujitsu MB9BF506n
Merseburg, 04/25/2013 – emtas GmbH located in the heart of Germany has extended its Master and Slave CANopen stacks to support the Fujitsu Semiconductor MB9BF506n microcontroller from the FM3 family. This efficient controller is based on the ARM Cortex-M3 with a clock rate up to 80MHz using 2 integrated CAN-controller of the widely used C_CAN from Bosch. This combination of devices is an ideal base for CANopen applications using…
CANopen protocol stack with application designer
emtas GmbH announces the release of version 1.0 of their CANopen Slave and Master stacks. The CANopen Slave Basic version is meant for the development of small CANopen Slaves with basic functionality. The Master/Slave version can be used to develop sophisticated CANopen slave or master applications. The stacks are written completely in ANSI-C and comply with most of the MISRA-C rules. The hardware-specific interfaces are separated in driver packages…
PROFINET-CANopen gateway
Powerful gateway enabling easy integration of CANopen devices in PROFINET networks
With its new PROFINET-CANopen gateway "COP-CON 220/PN", IXXAT offers a powerful and easily configurable gateway solution for connecting CANopen devices and networks to PROFINET systems.
The gateway enables bi-directional data exchange allowing for both the integration of existing, low-cost CANopen devices into PROFINET systems as well as the provision of data from PROFINET for use in CANopen. At this, the gateway…
New CANopen Master API Version 6
With the CANopen Master API, IXXAT offers a proven solution for a quick and easy development of PC based CANopen® control, test and service applications under Microsoft Windows.
IXXAT Automation is pleased to announce the updated and expanded CANopen Master API V6. Along with the active CAN interfaces, CANopen Master API V6 supports IXXAT’s low-priced passive interfaces.
The new API can operate up to 12 CAN interfaces in parallel, and, depending…
New CANopen extension for IXXAT's canAnalyser
With the new version 2.7 of the CANopen module, IXXAT offers a revised and considerably extended version of its proven CANopen extension for the canAnalyser.
The CANopen module is an extension for the canAnalyser 2.7, enabling the display of received layer-2 messages according to the CANopen notation. At this, received messages are analyzed according to the communication objects defined in the CANopen protocol and assigned to the nodes. The message content…
