Press release
CANopen protocol stack with application designer
emtas GmbH announces the release of version 1.0 of their CANopen Slave and Master stacks. The CANopen Slave Basic version is meant for the development of small CANopen Slaves with basic functionality. The Master/Slave version can be used to develop sophisticated CANopen slave or master applications. The stacks are written completely in ANSI-C and comply with most of the MISRA-C rules. The hardware-specific interfaces are separated in driver packages which allow a straight-forward adaption of the stacks to different microcontrollers. Driver packages are already available for wide-spread microcontrollers, among others various ARM or Cortex variants. The development of drivers by customers can be realized in short time thanks to the clearly defined interface.With the help of the included CANopen application design tool “CANopen DeviceDesigner” the user is supported with the fast and cost-saving development of CANopen applications. The developer only needs a few clicks to combine the object dictionary from predefined profiles. The CANopen DeviceDesigner generates an object dictionary and initialization functions of the stack in ANSI-C. Additionally, a consistent EDS- and XDD file as well as a HTML documentation of the device is created by the tool. Numerous ready-to-run examples, a user and a reference manual together with the highly documented source code simplify the integration of the CANopen stacks into own applications.
“Already during the development of the stack the software was used by various pilot customers and in own development projects. In addition with successful tests by the current CANopen Conformance Test a high reliability of the software is ensured already in version 1.0”, explains Andreas Boebel, CEO of emtas.
The license of the CANopen stacks is characterized by a single license fee. The CANopen stacks can be used for various CANopen projects without royalties at a development site. To ensure that the products meet the current state of standardization the company is member of the CAN in Automation e.V. (CiA). As already in the passed years the founders and employees of emtas are active in working groups of the CiA to participate in the development of CANopen specifications. Further information can be found on the web site: http://www.emtas.de/en/produkte/canopen-master-stack
emtas GmbH was founded in 2012 and is located in Merseburg in Germany. The company is a supplier of CANopen, EnergyBus and EtherCAT protocol software and tools. Additionally emtas offers integration support, development services as well as consulting and training for the topics CANopen, EnergyBus and EtherCAT.
Andreas Boebel
CEO
emtas GmbH
Fischweg 17
D-06217 Merseburg
Germany
Tel.:+49 (0)3461 / 79416-11
Fax.:+49 (0)3461 / 79416-10
service@emtas.de
http://www.emtas.de
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release CANopen protocol stack with application designer here
News-ID: 244175 • Views: …
More Releases from emtas GmbH
emtas CANopen FD protocol stack and tools released
Merseburg, October 2017
After the release of the CANopen FD specification CiA 1301 1.0 by the CAN in Automation e.V. emtas now announces their CANopen FD Master/Slave protocol stack.
Based on its field proven CANopen protocol stacks emtas has developed their new CANopen FD Master/Slave protocol stack, which can be used to develop CANopen FD master and slaves devices. The stack is delivered as source code for various targets and licensed under…
emtas Joins STMicroelectronics Partner Program to Accelerate Customer Time-to-Ma …
Merseburg, September 2nd – emtas GmbH announces that it has joined the STMicroelectronics Partner Program to make its CAN- and CAN-FD-based protocol stacks CANopen, CANopen FD and J1939 and related software development services available to customers.
“The efficient ST microcontrollers, especially the STM32 family that is supported by every emtas' protocol stack and applied with our stacks in various projects, have been appreciated by our customers for a long time,” says…
emtas CANopen FD support for STMicroelectronics STM32H7
Merseburg, March 2017 - At the Embedded World emtas GmbH presents its new CANopen FD protocol stack running on STMicroelectronics STM32H7 micro controller with CAN FD support.
Based on its field proven CANopen protocol stack emtas has developed their new CANopen FD protocol stack. Having used PC-based CAN FD interfaces hitherto, the CANopen FD stack has now been ported to the STM32H7 micro controller – one of the first industrial micro…
emtas CANopen stack for XMC MCUs using the latest Infineon DAVE™ (version 4)
[2015-03-30] Merseburg, Germany – emtas GmbH presents the first and easy to integrate CANopen stack for the latest DAVE™ version and the wide ARM® Cortex™-M powered XMC industrial microcontroller portfolio of Infineon Technologies.
Only four weeks after the first presentation of the new DAVE™ at the Embedded World 2015, CAN experts of emtas GmbH have now released the first version of the CANopen driver package using Infineon’s DAVE™ (version 4) for…
More Releases for CANopen
emtas CANopen FD support for STMicroelectronics STM32H7
Merseburg, March 2017 - At the Embedded World emtas GmbH presents its new CANopen FD protocol stack running on STMicroelectronics STM32H7 micro controller with CAN FD support.
Based on its field proven CANopen protocol stack emtas has developed their new CANopen FD protocol stack. Having used PC-based CAN FD interfaces hitherto, the CANopen FD stack has now been ported to the STM32H7 micro controller – one of the first industrial micro…
CANopen Protocol stacks for Fujitsu MB9BF506n
Merseburg, 04/25/2013 – emtas GmbH located in the heart of Germany has extended its Master and Slave CANopen stacks to support the Fujitsu Semiconductor MB9BF506n microcontroller from the FM3 family. This efficient controller is based on the ARM Cortex-M3 with a clock rate up to 80MHz using 2 integrated CAN-controller of the widely used C_CAN from Bosch. This combination of devices is an ideal base for CANopen applications using…
PROFINET-CANopen gateway
Powerful gateway enabling easy integration of CANopen devices in PROFINET networks
With its new PROFINET-CANopen gateway "COP-CON 220/PN", IXXAT offers a powerful and easily configurable gateway solution for connecting CANopen devices and networks to PROFINET systems.
The gateway enables bi-directional data exchange allowing for both the integration of existing, low-cost CANopen devices into PROFINET systems as well as the provision of data from PROFINET for use in CANopen. At this, the gateway…
New CANopen Master API Version 6
With the CANopen Master API, IXXAT offers a proven solution for a quick and easy development of PC based CANopen® control, test and service applications under Microsoft Windows.
IXXAT Automation is pleased to announce the updated and expanded CANopen Master API V6. Along with the active CAN interfaces, CANopen Master API V6 supports IXXAT’s low-priced passive interfaces.
The new API can operate up to 12 CAN interfaces in parallel, and, depending…
New CANopen extension for IXXAT's canAnalyser
With the new version 2.7 of the CANopen module, IXXAT offers a revised and considerably extended version of its proven CANopen extension for the canAnalyser.
The CANopen module is an extension for the canAnalyser 2.7, enabling the display of received layer-2 messages according to the CANopen notation. At this, received messages are analyzed according to the communication objects defined in the CANopen protocol and assigned to the nodes. The message content…
New CANopen API for Microsoft Windows Vista
The CANopen Master API and CANopen Manager API from IXXAT now support also Microsoft Windows Vista.
With Windows Vista Microsoft released a successor to Windows XP that not only features an updated user interface but also introduces a number of new security and safety features that have direct impact on user applications and driver software. With version 5.2 of the CANopen Master API and version 2.0 of the CANopen Manager…
