Press release
Laser projector LP-HFD is available with ZFSM (fibre-coupled laser technology)
ZFSM (fibre-coupled laser technology)
The ZFSM system separates the optics from the laser source via an optical fibre with an electronics harness. The heat generated by electronics and the laser source has no more direct influence on the optics, which results in a higher projection stability.
Optical properties of optical fibres are superior compared to bare laser diodes in terms of the beam profile (M² ~ 1.05) and the geometry of the dispersion. ZFSM yields small and perfectly round spots for point projection optics (e.g. 8μm at 30mm working distance).
Benefit for LP-HFD laser projectors
• Perfect circular beam quality
• Better laser power distribution within projection area
• Optics and electronics are separate parts = Less thermal drift
• Standard optics focusable up to 7m; Tele-optic allows focussing range up to 15m (available soon)
• All LP-HFD models will now use the same galvo set with smaller mirrors = LP-HFD green has now same speed as the former LP-HFD red
Main features of fibre-coupled laser technology:
• Supports laser diodes with red (638nm), green (520nm)
• Fibre length: 500mm by default
• Perfect beam quality:
- Point optics PZ: Standard < 7m, Tele < 15m
- Pointing stability: < 3μrad / °C
- Spot width: down to 15μm at 100mm working distance
• High power stability
• Digital Modulation: up to 100 kHz
Founded in 1985, Z-LASER is well-known as a manufacturer of industrial laser systems for manufacturing, machine vision, measurement and medical applications as well as appliance in analysis and science. The team has its own large development department that utilizes our expertise in optoelectronics and laser technology to come up with innovative solutions. For further company details please go to www.z-laser.com.
Alexander Klein
Marketing
Tel: +49 / 761 / 29644 320
Fax: +49 / 761 / 29644 55
Mail: klein@z-laser.de
Web: www.z-laser.com
Z-LASER Optoelektronik GmbH
Merzhauserstr. 134
79100 Freiburg / Germany
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Laser projector LP-HFD is available with ZFSM (fibre-coupled laser technology) here
News-ID: 282013 • Views: …
More Releases from Z-LASER Optoelektronik GmbH
CONTROL 2016 - New Z-LASER products with high attention
Leading automotive companies interested in new Z-LASER projectors | Presentation of new OEM ZX product line | Z-LASER goes Industry 4.0 | new ZX laser production line receives award
Stuttgart (Germany) | Recognized by exhibition visitors and even the competitors, Z-LASER presented itself at this year’s CONTROL 2016 not only in a new look, but also only with new products. Thus there had been several tech-talks with leading automotive companies…
Z-LASER presents its new laser projector at the JEC World Composites Show 2016 i …
Z-LASER presents new, multicolor laser projector in Paris | Z-LASER as member on the booth of the federal state of Baden-Württemberg | First fiber combined laser with red and green source in one device | Fiber combined laser with enhanced laser beam quality | Output rating from 7mW up to 40mW | Optics focusable by 0.5m up to 7.0m, additionally up to 14.0m | Fast driver card less flickering projections
Freiburg/Paris:…
30 years Z-LASER
Since Z-LASER’s founding in 1985, the company has been an innovative manufacturer of intelligent laser technologies. Since its inception, applications in the fields of metrology, industrial machine vision, positioning, and medical technology have been developed. Z-LASER’s products are exclusively developed and manufactured in Freiburg, Germany and serve as illumination for high-quality 2D and 3D camera based applications as well as a visual positioning aid in various industries. Besides high performance…
Z-LASER launches the 3rd generation of ZM18 machine vision lasers
Freiburg, Germany. After having established the innovative lightning ZM18 machine vision lasers five years ago, Z-LASER now provides even more powerful versions of ZM18 – the ZM18S3, ZM18H3 and ZM18DM53. The new driver electronics will offer significantly improved power stability over the whole temperature range. The future ZM18H3 series provides a new standard: blue and green emitting laser diodes come now with an Automatic Power Control (APC). A temperature-related performance…
More Releases for ZFSM
Laser solutions in intra-operative diagnosis
Freiburg, Germany. Emerging from the ZFSM Series, Z-LASER manufactures an OEM fiber-coupled laser platform for diagnostic and intra-operative medical applications. The platform can be configured for integration into standard and intra-operative diagnostic devices, as well as in surgical and therapeutical equipment.
Z-LASER offers a specific configuration of its ZFSM platform that projects a calibrated matrix in the 780nm wavelength which in turn can provide a defect map of the visualized area.…
ZFSM - Fibre-coupled laser technology
Freiburg, Germany – Z-LASER, a leading manufacturer of laser modules and laser systems, presents fibre-coupled laser systems. Its newly developed “ZFSM” laser systems utilize the inherently superior optical properties of fibres. This new product is especially suitable for applications with highest requirements in projection accuracy that is demanded in industrial machine vision and medical application.
Optical properties of fibres are superior compared to bare laser diodes in terms of the beam…
