Press release
Ceramic Polymer: Protective coating for substitution tanks of biogas feeding systems
Coated substitution tank for biogas feeding system, Picture: Metallbau Blechinger GmbH
For several years the German company Metallbau Blechinger GmbH uses the Ceramic Polymer premium product “Proguard CN 200” continuously for the coating of specific substitution tanks. This kind of vessels for feeding systems of biogas plants are produced at company Blechinger and successfully applied within the whole sector of biogas. Due to the internal coating the substitution tanks are optimally protected against chemical attacks of herbal and animal substrates. The external coating prevents the tanks from general corrosion and abrasion effects.
“Proguard CN 200“ is applied directly on the sandblasted surface (without previous use of a primer) by conventional airless spraying methods.
2 layers of 500 µm each already provide a durable and efficient value preservation for this field of application.
Recently, some tanks were inspected in regards of the coating quality.
The outstanding result:
After 3½ years of constant use the coating surface is still intact and effective.
Therefore, the quality and high-performance of the premium product „Proguard CN 200” of Ceramic Polymer GmbH is remarkably confirmed.
The Ceramic Polymer GmbH produces high-quality protective coatings for different kinds of industries. Due to the integration of microscopic ceramic and other special particles, coating systems with excellent chemical resistance, specific coatings for biogas or waste water applications as well as internal coatings for tanks and production vessels of all kinds are generated. Moreover, the Ceramic Polymer’s portfolio contains approved coatings for drinking water applications. The Ceramic Polymer coatings are applied directly on the blasted substrate without the previous use of a primer. In this way extreme adhesion is achieved. That signifies essential advantages in comparison to conventional multi-layered systems.
Ceramic Polymer GmbH
Stephanie Wuensch
Daimlerring 9
DE-32289 Roedinghausen
Phone: +49 (0)5223-96276-0
Email: swu@ceramic-polymer.de
Web: www.proguard-coatings.de
This release was published on openPR.
Permanent link to this press release:
Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.
You can edit or delete your press release Ceramic Polymer: Protective coating for substitution tanks of biogas feeding systems here
News-ID: 269566 • Views: …
More Releases from Ceramic Polymer GmbH
Ceramic Polymer: NORSOK M-501 - The Coatings for Offshore Requirements
New Product Line for demanding Offshore Areas
Regarding suitability of protective coatings for the offshore industry, the system classification
NORSOK M-501 is the most important standard for the assessment of product reliability.
The specific coatings feature extreme mechanical resistances and provide long-lasting corrosion protection
at durable sea water and weather exposure also within the tidal and splash zone.
NORSOK M-501, Edition 6 - System 1 and System 7B
Ceramic Polymer provides high-quality 2…
Ceramic Polymer: 15 Dump trailers coated with PROGUARD CN-1M – durable protect …
Up to now, the high-performance coating PROGUARD CN-1M was used for 15 special dump trailers from OptiTwin GmbH, manufacturer of utility vehicle for agriculture industry. The highly resistant internal coating was applied by the experiences partner, Reinken Company for blasting and coating technology located in Garrel/Germany. PROGUARD CN-1M provides long-term protection for the aluminum substrates against enfluences of liquid manure and solid animal residues.
The specific dump truck ”OptiTwin“…
Ceramic Polymer: Coating of copper block heat exchanger by flood method with low …
The company “Zacosin® the surface experts”, located in Gladbeck/Germany, is specified on surface protection of different devices and plant components as well as the wide scope of thermal process technology. For several years, the product PROGUARD CN-1M is applied for new coating or repair of coolers and water chambers made of copper, steel or cast aluminum. Furthermore, the system is used as sealing of thermal coated, enameled heat exchanger.
The…
