openPR Logo
Press release

Ceramic Polymer - Internal coating of heat storage tank inside the German „Energy bunker“

05-22-2013 06:19 PM CET | Industry, Real Estate & Construction

Press release from: Ceramic Polymer GmbH

Heat storage tank of "Energy bunker", Photo rights: IBA Hamburg /Martin Kunze

Heat storage tank of "Energy bunker", Photo rights: IBA Hamburg /Martin Kunze

The Ceramic Polymer GmbH is considerably taking part in this unique project with the premium coating system Proguard CN 200. The gigantic heat storage tank in the inside of the flak bunker (anti-aircraft bunker) has a diameter of 11.5 meters and a height of 20 meters. 2 million liters of water can be stored and heated up to 90°C. For durable preservation of the tank our internal coating Proguard CN 200 was applied. The use of our temperature resistant protection system within this innovative concept confirms once more the high performance and quality of the Ceramic Polymer brand coatings.

The „Energy bunker“ – Symbol for climate protection
(A project of „Internationale Bauausstellung IBA Hamburg“)

The former flak bunker in Wilhelmsburg/Germany is the new symbol for the climate protection concept “renewable Wilhelmsburg”. After “WW2” the monument was nearly unused. Since beginning of 2011, the bunker was renovated and completed to an ecological power station.

The combination of innovative technologies facilitates the supply of an urban district over 1.2 square kilometers (3000 households) with warm water and thermal heat. The huge heat storage tank with a capacity of 2000 m³ is powered by a mix of different renewable energies. A bio-methane fired block heating station and a wood chips firing system are installed in the basement of the bunker. On the roof and south facade photovoltaic and solar heat installations of 3000 m² produce environmentally friendly electricity and heat from sunlight. Furthermore, waste heat from a nearby industrial company is used as a regional energy source.

Our partners for tank building and surface technology:

The big heat storage tank was built by Segler GmbH & Co. KG. The company is specialized in fabrication of various kinds of tanks as well as extensive tank farms, multi-chamber tanks and large heat accumulators.
For more than 40 years, individual requirements and technical standards are competently implemented. The Segler GmbH & Co. KG produces tanks up to a height of 20 meters in the plant’s own assembly tower. Larger tanks are built on site by employed certificated welders.

The company Korrosionsschutz Taetz provides 30 years of experience in the complete field of surface technology. Authorized technical staff and innovative blasting and coating techniques facilitate perfect application results. The use of special elevator cars effectuates fast and flexible work without time-consuming scaffolding.

The Ceramic Polymer GmbH produces high-performance coatings with integrated micro ceramic particles for different fields of application. The properties of the ceramic – chemical resistance, abrasion resistance and weathering stability – justify the high quality of our coating systems. By extra integration of microscopic special particles, we generate coating products which provide the highest protection properties.

Ceramic Polymer GmbH
Stephanie Wuensch
Daimlerring 9
DE-32289 Rödinghausen
Phone: +49 (0) 5223 – 96 276-0
Email: info@ceramic-polymer.de
Web: www.ceramic-polymer.de

This release was published on openPR.

Permanent link to this press release:

Copy
Please set a link in the press area of your homepage to this press release on openPR. openPR disclaims liability for any content contained in this release.

You can edit or delete your press release Ceramic Polymer - Internal coating of heat storage tank inside the German „Energy bunker“ here

News-ID: 258761 • Views: 4451

More Releases from Ceramic Polymer GmbH

Ceramic Polymer: NORSOK M-501 - The Coatings for Offshore Requirements
New Product Line for demanding Offshore Areas Regarding suitability of protective coatings for the offshore industry, the system classification NORSOK M-501 is the most important standard for the assessment of product reliability. The specific coatings feature extreme mechanical resistances and provide long-lasting corrosion protection at durable sea water and weather exposure also within the tidal and splash zone. NORSOK M-501, Edition 6 - System 1 and System 7B Ceramic Polymer provides high-quality 2
Ceramic Polymer: 15 Dump trailers coated with PROGUARD CN-1M – durable protect …
Up to now, the high-performance coating PROGUARD CN-1M was used for 15 special dump trailers from OptiTwin GmbH, manufacturer of utility vehicle for agriculture industry. The highly resistant internal coating was applied by the experiences partner, Reinken Company for blasting and coating technology located in Garrel/Germany. PROGUARD CN-1M provides long-term protection for the aluminum substrates against enfluences of liquid manure and solid animal residues. The specific dump truck ”OptiTwin“
Ceramic Polymer: Coating of copper block heat exchanger by flood method with low …
The company “Zacosin® the surface experts”, located in Gladbeck/Germany, is specified on surface protection of different devices and plant components as well as the wide scope of thermal process technology. For several years, the product PROGUARD CN-1M is applied for new coating or repair of coolers and water chambers made of copper, steel or cast aluminum. Furthermore, the system is used as sealing of thermal coated, enameled heat exchanger. The
Ceramic Polymer: External coating of a huge universal tank in Czech Republic
Czech Republic: The external coating of the large tank, which is part of a well-known car manufacturing company, was renovated effectively with the products CERAMIC-POLYMER STP-EP and PROGUARD 169(37). The combination of the primer and top coat provides beside a simple application a durable protection against corrosion – even at extremely corrosive environmental conditions. The tank has a height of 25 meters and is used within the car factory as a

All 5 Releases


More Releases for Energy

Wind Energy Technology Market
HTF MI released a new market study on Southeast Asia Wind Energy Technology Market with 100+ market data Tables, Pie Chat, Graphs & Figures spread through Pages and easy to understand detailed analysis. At present, the market is developing its presence. The Research report presents a complete assessment of the Market and contains a future trend, current growth factors, attentive opinions, facts, and industry validated market data. The research study
Skylight Energy Melbourne
Skylight Energy is the leading provider of solar energy in Australia. We specialise in high quality yet affordable renewable energy products for either your home or business. Our large selection of products consists of only the finest Tier 1 solar panels, solar inverters and home battery packs. All of our products have been approved by the Clean Energy Council, and certified for safety to the highest Australian and international standards. Whether
Green energy
Green energy is the electricity derived from smooth assets generating minimum pollution and consists of sun photovoltaic, hydropower, wind electricity, bio-fuels and geothermal. expanded investments in era studies and improvement, supportive regulatory frameworks, extended consciousness and electricity security troubles and environmental concerns amongst others are fueling the boom in call for for clean and inexperienced energy. The report on the Global Smart Cards Automated Fare Collection System Market is a thorough
Energy Drinks in India
ReportsWorldwide has announced the addition of a new report title Energy Drinks in India to its growing collection of premium market research reports. Energy Drinks in India industry profile provides top-line qualitative and quantitative summary information including: market share, market size (value and volume 2011-15, and forecast to 2020). The profile also contains descriptions of the leading players including key financial metrics and analysis of competitive pressures within the market. Synopsis: Essential resource
Complete Energy Management from eSight Energy
Why choose eSight Energy? You can manage and reduce your energy with the eSight software by importing data into the software and managing your expectations with informative and intuitive graphs and charts. Please view the video here: https://vimeo.com/203430337 eSight Energy provides energy management solutions for use across any type of building or process. With installations across Europe, the US, Middle East and Asia, solutions are provided through a network of resellers
Plant Optimisation Saves Energy
Can the coating dry more quickly? Is it possible to reduce the rejection rate? Does the plant use too much energy? Many companies ask themselves questions like these. Energy and material costs are important considerations for industrial companies who wish to maintain or improve their competitiveness. At the same time, the optimisation of existing plant can often be the more sensible and cost-effective option over installing new plant. A